A Amana dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. Below are independent repair companies serving Mission, with those that mention Amana first, then the nearest dryer repair companies.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by Amana. If your dryer is still under manufacturer coverage, contact Amana directly.
Amana Dryer Repair Near Mission
40 repair companies serve Mission from within 30 miles. 4 list an address in Mission, and the rest are spread across McAllen (25), Edinburg (4), and Pharr (3). No company within 90 miles of Mission mentions Amana by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Yes Fix is the nearest, roughly 0.1 miles from Mission. Across 37 rated companies, the average public rating is 4.3 stars.
Companies are shown by relevance and distance from Mission. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Mention Amana | 0 |
|---|---|
| Companies within 30 miles | 42 |
| Show laundry appliance work | 5 |
| Distance to the three closest (mi) | 0.1, 0.7, 4.0 |
| Listing Saturday hours | 26 |
| Rated 4.5 stars or higher (10+ reviews) | 7 |
At the top of the Mission list: Treviño Appliance - Sales, Service & Parts (8.9 miles away, based in Pharr, 4.7 stars from 232 reviews, lists Saturday hours); Sears Appliance Repair (6.0 miles away, based in McAllen, 4.4 stars from 290 reviews, lists Saturday hours); Treviño Appliance - Sales, Service & Parts (12.6 miles away, based in Edinburg, 4.4 stars from 104 reviews, lists Saturday hours); Sears Appliance Repair (20.7 miles away, based in Weslaco, 4.6 stars from 226 reviews, lists Saturday hours).
Know Your Amana Dryer
What Makes Amana Dryer Repairs Different
Electric Amana dryers run on a 240-volt supply with two 30-amp breakers, one for the motor and one for the heating element, so a single tripped breaker can stop heating. Source: Amana Product Help - Dryer is Not Heating
Amana calls for a rigid 4-inch metal exhaust vent kept as short as possible with no more than four 90-degree elbows, and says plastic or foil vent should be replaced. Source: Amana - Electronic Dryer Use and Care Guide
Common Amana Dryer Problems
- Dryer not heating. Amana says to check both 30-amp breakers and the 240-volt supply on electric models, or that the gas shutoff valve is open on gas models, and make sure an air-only cycle isn't selected. Source: Amana Product Help - Dryer is Not Heating
- Cycle ends too soon. Amana says the load may not be touching the sensor strips, so level the dryer and use Timed Dry or a different dryness level for very small loads. Source: Amana - Electronic Dryer Use and Care Guide
When to Call for Amana Dryer Repair
- Dryer shuts off a few minutes into the cycle
- Burning or hot smell during a cycle
- Dryer will not start when you press Start
What Gets Fixed on a Mission Dryer Call
Owner Care for Amana Dryers
- Clean the full vent run, including the exhaust hood, at least every two years, or sooner if drying slows down. Source: Amana - Electronic Dryer Use and Care Guide
- Have a qualified technician remove lint from inside the dryer cabinet every two years, or more often with heavy use. Source: Amana - Electronic Dryer Use and Care Guide
Amana Dryer Repair Cost Ranges
A Amana dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- Whether the dryer is gas or electric
- How long the vent run is and where it exits the house
- The brand, model and serial number from the label inside the door or on the back panel
Dryer Notes for Mission, TX
Most dryer calls in Mission come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, §1301.053 (Texas State Board of Plumbing Examiners)
Gas piping counts as plumbing in Texas and requires a plumbing license, with an exemption for LP gas installers who hold a separate state LP gas license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, §§1301.002, 1301.055 (Texas State Board of Plumbing Examiners)
How to Choose a Dryer Technician Near Mission
- If a part has to be ordered, how soon can you come back to finish?
- Will you check the vent and lint path as part of the visit?
- Can you give a written estimate before ordering parts?
Amana Dryer Repair FAQs: Mission, TX
Why does my dryer take so long to dry?
Do you work for Amana?
Is my Amana dryer worth repairing?
What should I do about a Amana error code?
More Laundry Repair in Mission, TX
Amana Dryer Repair in Nearby Cities
Amana Dryer Repair for Towns Near Mission
Amana dryer repair for Palmview South is handled by the same companies listed for Mission. Each town also has its own dryer repair page with the nearest companies:
Write down any error code your Amana dryer shows and when it appears. It helps a Mission technician bring the right parts.