Most Amana dryer repairs in Farmington involve the same few systems: heat, airflow, the drum drive and the controls. We flag companies whose listing or website mentions Amana and fill in with nearby dryer repair companies so you always have options.
This is an independent directory. We are not affiliated with Amana, and the technicians listed are independent repair companies, not the manufacturer.
Amana Dryer Repair Near Farmington
Within 30 miles of Farmington there are 40 appliance repair companies in our data. 1 of them are based in Farmington itself, and the rest are spread across Salt Lake City (16), Clearfield (3), and Ogden (3). Nearest on the list: Dependable Appliance Repair Petroglyph, around 0.1 miles out. None of the repair companies near Farmington name Amana in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. Across 27 rated companies, the average public rating is 4.5 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Companies within 30 miles | 60 |
|---|---|
| Listing Saturday hours | 42 |
| With 4.5+ stars and at least 10 reviews | 17 |
| Show laundry appliance work | 4 |
| Three nearest companies, miles away | 0.1, 3.7, 3.9 |
| Mention Amana | 0 |
The leading options for Farmington are iFiX, LLC (14.0 miles away, based in Riverdale, 4.9 stars from 436 reviews); Eagle Appliance Repair Of Salt Lake City (6.9 miles away, based in West Bountiful, 5.0 stars from 98 reviews, lists Saturday hours); Baseline Home Maintenance (15.3 miles away, based in Salt Lake City, 5.0 stars from 258 reviews, lists Saturday hours); Western Appliance Solution (15.3 miles away, based in Salt Lake City, 5.0 stars from 82 reviews).
Amana Dryer Features Technicians Work On
What Makes Amana Dryer Repairs Different
Front load matching models are stackable and use electronic touch controls, while top load matching models use dial controls. Source: Amana - Dryer Comparison Chart
Common Amana Dryer Problems
- Dryer not heating. Amana says to check both 30-amp breakers and the 240-volt supply on electric models, or that the gas shutoff valve is open on gas models, and make sure an air-only cycle isn't selected. Source: Amana Product Help - Dryer is Not Heating
- Dryer making noise. Amana says a thump after sitting unused usually fades, then to check the drum edges for coins or buttons and make sure all four legs are installed and the dryer is level. Source: Amana - Electronic Dryer Use and Care Guide
When to Call for Amana Dryer Repair
- Drum will not turn even though you hear a hum
- Dryer will not start when you press Start
- Outside of the cabinet gets unusually hot
What Gets Fixed on a Farmington Dryer Call
Care Amana Recommends for Its Dryers
- Clean the full vent run, including the exhaust hood, at least every two years, or sooner if drying slows down. Source: Amana - Electronic Dryer Use and Care Guide
- Every six months, or sooner if lint falls off during use, wash the lint screen with hot water, liquid detergent and a nylon brush to remove residue. Source: Amana - Electronic Dryer Use and Care Guide
What Amana Dryer Repairs Cost
Price the repair before replacing a Amana dryer. Published ranges for common jobs:
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- The brand, model and serial number from the label inside the door or on the back panel
- Any error code on the display
- How long the vent run is and where it exits the house
Dryer Notes for Farmington, UT
Most dryer calls in Farmington come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
Gas appliance and combustion system work, starting at the outlet of the gas meter, falls under DOPL's construction trades licensing, and the qualifier for an HVAC contractor license must be a Certified Natural Gas Technician. Source: DOPL Contractor Classifications
Hiring a Dryer Repair Company in Farmington
- How often do you repair Amana dryers, and do you carry common parts on the truck?
- If a part has to be ordered, how soon can you come back to finish?
- Will you check the vent and lint path as part of the visit?
Amana Dryer Repair FAQs: Farmington, UT
Is my Amana dryer worth repairing?
Why do my clothes come out damp?
Why is my dryer running but not heating?
Which Farmington technicians work on Amana?
Related Repair Pages for Farmington
More Amana Dryer Repair Pages Nearby
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a Amana repair.