Amana owners in Frederickson usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving Frederickson, with those that mention Amana first, then the nearest dryer repair companies.
This is an independent directory. We are not affiliated with Amana, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Amana Dryers Near Frederickson
40 repair companies serve Frederickson from within 30 miles. Other nearby bases include Tacoma (14), Federal Way (5), and Spanaway (4). Distances run up to about 15 miles. Whirlpool Corporation is the nearest, roughly 1.2 miles from Frederickson. None of the repair companies near Frederickson name Amana in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. The 28 rated companies in range average 4.7 stars.
Companies are shown by relevance and distance from Frederickson. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Mention Amana | 0 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 22 |
| Show laundry appliance work | 13 |
| Listing Saturday hours | 35 |
| Three nearest companies, miles away | 1.2, 3.1, 3.2 |
| Appliance repair companies in range (30 mi) | 60 |
First up for Frederickson: Weirs Appliances (5.0 miles away, based in Tacoma, 4.7 stars from 483 reviews, lists Saturday hours); HotWire Furnace, Air Conditioning & Appliance Repair Tacoma (13.9 miles away, based in Tacoma, 4.9 stars from 470 reviews, lists Saturday hours); Sears Appliance Repair (3.5 miles away, based in Spanaway, 4.5 stars from 111 reviews, lists Saturday hours); RPS Appliance Repair (4.0 miles away, based in Graham, 4.9 stars from 495 reviews).
Know Your Amana Dryer
How Amana Dryers Are Built
The dryer needs a room temperature above 45°F to dry properly, and closet installs need adequate ventilation. Source: Amana - Electronic Dryer Use and Care Guide
What Amana Says to Check First
- Dryer won't start. Amana says to press and hold Start for two to five seconds first, then check the fuses or breakers, the door latch, the cycle selection and whether the controls are locked. Source: Amana Product Help - Dryer Not Starting or No Operation
- Cycle ends too soon. Amana says the load may not be touching the sensor strips, so level the dryer and use Timed Dry or a different dryness level for very small loads. Source: Amana - Electronic Dryer Use and Care Guide
When to Call for Amana Dryer Repair
- Dryer will not start when you press Start
- Dryer shuts off a few minutes into the cycle
- Clothes still damp after a full cycle
How a Dryer Service Call Usually Goes in Frederickson
Care Amana Recommends for Its Dryers
- Clean the lint screen before every load and never run the dryer with a loose, damaged, blocked or missing screen. Source: Amana - Electronic Dryer Use and Care Guide
- Clean the full vent run, including the exhaust hood, at least every two years, or sooner if drying slows down. Source: Amana - Electronic Dryer Use and Care Guide
What Amana Dryer Repairs Cost
A Amana dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair: $100–$200 Source: Fixr - How much does it cost to repair a dryer?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- The brand, model and serial number from the label inside the door or on the back panel
- Any error code on the display
Dryer Notes for Frederickson, WA
Most dryer calls in Frederickson come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Washington's Department of Labor & Industries issues an appliance repair (07D) specialty electrician certificate that covers like-for-like repair and replacement of self-contained appliances such as ovens on an unchanged circuit, but excludes branch-circuit wiring and plumbing work. Source: WAC 296-46B-920, Electrical/telecommunications license/certificate types and scope of work
Washington's state plumber certification law defines plumbing as potable water, waste, medical gas and similar systems and does not list fuel gas piping, so gas line work is not part of the state plumber certificate. Source: Chapter 18.106 RCW, Plumbers
Before You Book in Frederickson
- What is the service call or diagnostic fee, and is it applied to the repair?
- Can you give a written estimate before ordering parts?
- What guarantee do you give on parts and labor?
Amana Dryer Repair FAQs: Frederickson, WA
Is my Amana dryer worth repairing?
What should I do about a Amana error code?
Why do my clothes come out damp?
More Laundry Repair in Frederickson, WA
Amana Dryer Repair Near Frederickson
Also Serving Towns Around Frederickson
The technicians listed for Frederickson also cover smaller towns nearby, including Summit View. If you are in one of them, the companies above are your closest Amana dryer repair options, and our helpline covers you too.
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a Amana repair.