Most Kenmore dryer repairs in Tarrant involve the same few systems: heat, airflow, the drum drive and the controls. Below are independent repair companies serving Tarrant, with those that mention Kenmore first, then the nearest dryer repair companies.
Washer and Dryer Repair is independent and not affiliated with Kenmore. Listed companies are independent technicians who repair Kenmore dryers and other brands.
Kenmore appliances were sold through Sears for decades, so many owners look for Sears dryer repair. The companies here are independent technicians who work on Kenmore and Kenmore Elite dryers; they are not Sears.
Who Works on Kenmore Dryers Near Tarrant
Within 30 miles of Tarrant there are 40 appliance repair companies in our data. The rest are spread across Birmingham (29), Hoover (2), and Center Point (1). Appliance Maintenance & Service Center is the nearest, roughly 3.4 miles from Tarrant. No company within 90 miles of Tarrant mentions Kenmore by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Across 22 rated companies, the average public rating is 4.3 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention Kenmore | 0 |
|---|---|
| List dryer or washer & dryer work | 6 |
| Companies within 30 miles | 59 |
| Listing Saturday hours | 24 |
| Distance to the three closest (mi) | 3.4, 4.1, 4.3 |
| Rated 4.5 stars or higher (10+ reviews) | 14 |
Closest matches for Tarrant: Lewie's Appliance Sales & Service (4.9 miles away, based in Birmingham, 4.9 stars from 2,563 reviews, lists Saturday hours); Mr. Appliance Over the Mountain (6.1 miles away, based in Birmingham, 4.8 stars from 1,998 reviews, lists Saturday hours); OTM Appliance Repair (14.7 miles away, based in Birmingham, 4.8 stars from 457 reviews); Atlas Appliance Repair (4.3 miles away, based in Birmingham, 4.9 stars from 2,483 reviews).
Know Your Kenmore Dryer
How Kenmore Dryers Are Built
SmartDry Ultra dryers combine two moisture sensors with a temperature monitor and a dual heating element to fine-tune heat and cycle length. Source: Kenmore - 8.8 cu. ft. Electric Dryer w/ SmartDry Ultra Technology
Kenmore's compact condensing dryer needs no outside wall vent, runs on a 220V supply and offers manual-drain or direct-drain water removal. Source: Kenmore - 4.0 cu. ft. Front-Load Electric Condensing Dryer
Common Kenmore Dryer Problems
- Clothes wrinkled after drying. Kenmore says to remove clothes promptly, avoid overloading, and use Wrinkle Guard or a short touch-up cycle. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Check Vent light blinking. Kenmore says the exhaust is seriously restricted and the ducts should be cleaned and inspected before using the dryer again. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Kenmore Dryer Error Codes
| Code | What it means |
|---|---|
| CHECK FILTER (Elite steam dryers) | A reminder to clean the lint filter before the load. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| gAS (Elite steam dryers) | The gas supply is off on a gas model; open the house and dryer gas shutoffs. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| d80 / d90 / d95 (Elite steam dryers) | The exhaust ductwork is roughly 80, 90 or 95 percent blocked; stop using the dryer until the vent is cleaned or repaired. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Signs Your Kenmore Dryer Needs a Technician
- Clothes still damp after a full cycle
- Squealing, thumping or grinding while it runs
- Drum will not turn even though you hear a hum
What a Dryer Repair Technician Checks
Care Kenmore Recommends for Its Dryers
- Use only 4-inch rigid or semi-rigid metal duct (no plastic or foil), check it for lint monthly and clean it at least yearly; one Elite steam model allows about 65 feet with no elbows and 28 feet with four 90-degree elbows using a 4-inch hood. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Kenmore Dryer Repair Cost Ranges
Most Kenmore dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- How long the vent run is and where it exits the house
- Any error code on the display
- The brand, model and serial number from the label inside the door or on the back panel
What Tarrant Owners Should Know
Most dryer calls in Tarrant come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Alabama does not issue a separate appliance repair license, and the state's heating, air conditioning and refrigeration contractor law expressly excludes work on household appliances, residential refrigerators and ice machines. Source: Code of Alabama 1975, Section 34-31-18 et seq. (Alabama Board of Heating, Air Conditioning & Refrigeration Contractors)
Gas fitting work in Alabama requires a state gas fitter license from the Alabama Plumbers and Gas Fitters Examining Board, which tests competency before anyone performs, supervises or contracts gas fitting. Source: About the Board - Alabama Plumbers and Gas Fitters Examining Board
Before You Book in Tarrant
- Will you check the vent and lint path as part of the visit?
- Do you work on gas dryers, and who handles anything involving the gas line?
- How often do you repair Kenmore dryers, and do you carry common parts on the truck?
Kenmore Dryer Repair FAQs: Tarrant, AL
Do you work for Kenmore?
What makes a dryer stop heating?
Is my Kenmore dryer worth repairing?
How do I find a technician who knows Kenmore dryers?
Related Repair Pages for Tarrant
More Kenmore Dryer Repair Pages Nearby
Before you call, find the model and serial number on your Kenmore dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.