Most Kenmore dryer repairs in Globe involve the same few systems: heat, airflow, the drum drive and the controls. We flag companies whose listing or website mentions Kenmore and fill in with nearby dryer repair companies so you always have options.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by Kenmore. If your dryer is still under manufacturer coverage, contact Kenmore directly.
Kenmore appliances were sold through Sears for decades, so many owners look for Sears dryer repair. The companies here are independent technicians who work on Kenmore and Kenmore Elite dryers; they are not Sears.
Kenmore Dryer Repair Near Globe
We found 36 appliance repair companies within 60 miles of Globe. Other nearby bases include Gilbert (11), Mesa (9), and Apache Junction (4). No company within 60 miles of Globe names Kenmore in its listing, so the list adds matches from farther out and the closest appliance repair companies. Sanctuary Appliance Repair Operators is the nearest, roughly 44.1 miles from Globe. The 29 rated companies in range average 4.8 stars. Globe is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Companies are shown by relevance and distance from Globe. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Distance to the three closest (mi) | 44.1, 45.2, 46.0 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 14 |
| Listing Saturday hours | 22 |
| List dryer or washer & dryer work | 7 |
| Mention Kenmore | 0 |
| Appliance repair companies in range (60 mi) | 36 |
At the top of the Globe list: Glendale Kenmore Repair (82.9 miles away, based in Glendale, 3.6 stars from 12 reviews, lists Saturday hours); Sears Appliance Repair (54.2 miles away, based in Mesa, 4.6 stars from 226 reviews, lists Saturday hours); ROCK SOLID APPLIANCE REPAIR (50.5 miles away, based in Queen Creek, 5.0 stars from 53 reviews, lists Saturday hours); Rhino Appliance Repair (58.8 miles away, based in Gilbert, 4.6 stars from 53 reviews, lists Saturday hours).
Know Your Kenmore Dryer
How Kenmore Dryers Are Built
SmartDry Ultra dryers combine two moisture sensors with a temperature monitor and a dual heating element to fine-tune heat and cycle length. Source: Kenmore - 8.8 cu. ft. Electric Dryer w/ SmartDry Ultra Technology
Kenmore's compact condensing dryer needs no outside wall vent, runs on a 220V supply and offers manual-drain or direct-drain water removal. Source: Kenmore - 4.0 cu. ft. Front-Load Electric Condensing Dryer
Common Kenmore Dryer Problems
- Dryer vibrating or noisy. Kenmore says to level the dryer on its four feet without extending them more than needed and keep at least an inch of clearance at the sides and back. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Check Vent light blinking. Kenmore says the exhaust is seriously restricted and the ducts should be cleaned and inspected before using the dryer again. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Reading a Kenmore Dryer Error Code
| Code | What it means |
|---|---|
| CL (Elite steam dryers) | Control Lock is on. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| HS (Elite steam dryers) | The humidity (moisture) sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| PF / nP (Elite steam dryers) | A power supply or cord connection problem; check the cord at the terminal block and the house fuse or breaker. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Signs Your Kenmore Dryer Needs a Technician
- Cycles take two or three runs to finish
- Dryer shuts off a few minutes into the cycle
- Burning or hot smell during a cycle
What a Dryer Repair Technician Checks
Owner Care for Kenmore Dryers
- Use only 4-inch rigid or semi-rigid metal duct (no plastic or foil), check it for lint monthly and clean it at least yearly; one Elite steam model allows about 65 feet with no elbows and 28 feet with four 90-degree elbows using a 4-inch hood. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- If the lint screen looks clogged when held to the light, scrub it with hot soapy water and a stiff brush and let it dry fully before reinstalling. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
What Kenmore Dryer Repairs Cost
Most Kenmore dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- Any error code on the display
- How long the vent run is and where it exits the house
- Whether the dryer is gas or electric
Dryer Notes for Globe, AZ
Most dryer calls in Globe come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Arizona has no appliance-repair-specific license; work is regulated through Registrar of Contractors classifications, and state law removes the small-job (under $1,000) handyman exemption for any work connecting or repairing appliances on natural gas or propane. Source: A.R.S. 32-1121 - Persons not required to be licensed
The Arizona Registrar of Contractors licenses gas piping and gas appliance work under its plumbing classifications (such as C-37 and R-37), which cover piping and appliances for natural and manufactured gas. Source: License Classifications - Arizona Registrar of Contractors
Questions to Ask a Globe Technician
- Is your company licensed where my state requires it, and insured?
- Will you check the vent and lint path as part of the visit?
- What is the service call or diagnostic fee, and is it applied to the repair?
Kenmore Dryer Repair FAQs: Globe, AZ
Do you work for Kenmore?
Why does my dryer take so long to dry?
How do I find a technician who knows Kenmore dryers?
Other Dryer Repair in Globe
More Kenmore Dryer Repair Pages Nearby
Before you call, find the model and serial number on your Kenmore dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.