Most Kenmore dryer repairs in Berkley involve the same few systems: heat, airflow, the drum drive and the controls. The Berkley list starts with companies that name Kenmore, followed by other appliance repair companies that list dryer work.
This is an independent directory. We are not affiliated with Kenmore, and the technicians listed are independent repair companies, not the manufacturer.
If you bought your Kenmore at Sears, you do not need to go back to Sears for a repair. Independent technicians near Berkley work on Kenmore dryers every week.
Who Works on Kenmore Dryers Near Berkley
40 repair companies serve Berkley from within 30 miles. Other nearby bases include Arvada (13), Denver (12), and Westminster (9). Distances run up to about 5 miles. None of the repair companies near Berkley name Kenmore in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. The closest is Cornerstone Appliance Repair Works, about 0.6 miles away. Rated companies nearby average 4.7 stars across 34 businesses.
Companies are shown by relevance and distance from Berkley. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Companies within 30 miles | 60 |
|---|---|
| Mention Kenmore | 0 |
| List dryer or washer & dryer work | 16 |
| With 4.5+ stars and at least 10 reviews | 11 |
| Distance to the three closest (mi) | 0.6, 1.1, 1.5 |
| Open on Saturdays (per listing) | 39 |
The leading options for Berkley are Appliance Factory (4.0 miles away, based in Westminster, 4.6 stars from 1,109 reviews, lists Saturday hours); Mr. Appliance of Golden - Lakewood (4.8 miles away, based in Wheat Ridge, 4.7 stars from 715 reviews); Tonny's Appliance Repair (3.3 miles away, based in Westminster, 4.9 stars from 217 reviews); Repair Porter Inc - Arvada (3.7 miles away, based in Arvada, 4.9 stars from 22 reviews, lists Saturday hours).
Know Your Kenmore Dryer
What a Kenmore Dryer Technician Deals With
SmartDry Ultra dryers combine two moisture sensors with a temperature monitor and a dual heating element to fine-tune heat and cycle length. Source: Kenmore - 8.8 cu. ft. Electric Dryer w/ SmartDry Ultra Technology
On Kenmore Elite steam dryers, the display reports ductwork restriction in steps (d80, d90, d95) and a blinking CHECK VENT, which the guide says is an exhaust problem rather than a dryer failure. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Says to Check First
- Dryer won't start. Kenmore says to confirm the cord is fully plugged into a grounded outlet and the breaker is intact, and to turn off Control Lock if buttons beep but nothing happens. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Check Vent light blinking. Kenmore says the exhaust is seriously restricted and the ducts should be cleaned and inspected before using the dryer again. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Kenmore Dryer Error Codes
| Code | What it means |
|---|---|
| tE1-tE7 (Elite steam dryers) | A temperature sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| d80 / d90 / d95 (Elite steam dryers) | The exhaust ductwork is roughly 80, 90 or 95 percent blocked; stop using the dryer until the vent is cleaned or repaired. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| gAS (Elite steam dryers) | The gas supply is off on a gas model; open the house and dryer gas shutoffs. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore smart washers and dryers can check diagnostics through the Kenmore Smart app or Alexa and send app notices about blocked filters and other machine issues. Source: Kenmore - Kenmore Elite 81782 Smart 7.4 cu. ft. Electric Dryer with Accela Steam
Kenmore Dryer Problems Worth a Service Call
- Drum turns but the air stays cool
- Dryer shuts off a few minutes into the cycle
- Drum will not turn even though you hear a hum
What Gets Fixed on a Berkley Dryer Call
Care Kenmore Recommends for Its Dryers
- If the lint screen looks clogged when held to the light, scrub it with hot soapy water and a stiff brush and let it dry fully before reinstalling. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Budgeting for a Kenmore Dryer Repair
A Kenmore dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a Kenmore Dryer Call
- How long the vent run is and where it exits the house
- The brand, model and serial number from the label inside the door or on the back panel
- What happens when you press Start (no response, hum, runs with no heat, stops early)
Around Berkley
Most dryer calls in Berkley come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Colorado's Division of Professions and Occupations has no appliance repair license; its trade licenses cover plumbing and electrical work. Source: Occupational Professions (Colorado DORA Division of Professions and Occupations)
State law treats fuel gas piping separately from plumbing and has the State Plumbing Board adopt a Colorado fuel gas code for inspecting gas piping installations; hooking a gas appliance to an existing service connection falls outside the statute's definition of gas piping. Source: Colorado Revised Statutes Title 12, ยงยง 12-155-103 and 12-155-106 (Colorado General Assembly)
Questions to Ask a Berkley Technician
- What guarantee do you give on parts and labor?
- Can you look at the washer on the same visit if it is acting up too?
- Is your company licensed where my state requires it, and insured?
Kenmore Dryer Repair FAQs: Berkley, CO
Why does my dryer take so long to dry?
How do I find a technician who knows Kenmore dryers?
Should I repair or replace my Kenmore dryer?
Other Dryer Repair in Berkley
Kenmore Dryer Repair Near Berkley
Before you call, find the model and serial number on your Kenmore dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.