Kenmore owners in Safety Harbor usually want two things from a repair company: experience with the brand and quick access to parts. We flag companies whose listing or website mentions Kenmore and fill in with nearby dryer repair companies so you always have options.
Washer and Dryer Repair is independent and not affiliated with Kenmore. Listed companies are independent technicians who repair Kenmore dryers and other brands.
If you bought your Kenmore at Sears, you do not need to go back to Sears for a repair. Independent technicians near Safety Harbor work on Kenmore dryers every week.
Who Works on Kenmore Dryers Near Safety Harbor
Within 30 miles of Safety Harbor there are 40 appliance repair companies in our data. The rest are spread across Clearwater (17), Palm Harbor (7), and Largo (6). None of the companies within 30 miles mention Kenmore by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. The closest is R&A Care Appliance Service, about 2.1 miles away. The 30 rated companies in range average 4.7 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Listing Saturday hours | 32 |
|---|---|
| Appliance repair companies in range (30 mi) | 60 |
| With 4.5+ stars and at least 10 reviews | 31 |
| Show laundry appliance work | 13 |
| Mention Kenmore | 0 |
| Distance to the three closest (mi) | 2.1, 2.2, 2.2 |
The leading options for Safety Harbor are Sears Appliance Repair (18.5 miles away, based in Temple Terrace, 4.6 stars from 131 reviews, lists Saturday hours); Mr. Appliance of Pinellas County (3.0 miles away, based in Oldsmar, 4.9 stars from 608 reviews, lists Saturday hours); Teodor Appliance Repair (6.2 miles away, based in Clearwater, 5.0 stars from 119 reviews, lists Saturday hours); APPLIANCE REPAIR TEODOR (7.9 miles away, based in Tampa, 4.8 stars from 198 reviews, lists Saturday hours).
Know Your Kenmore Dryer
How Kenmore Dryers Are Built
Kenmore's compact condensing dryer needs no outside wall vent, runs on a 220V supply and offers manual-drain or direct-drain water removal. Source: Kenmore - 4.0 cu. ft. Front-Load Electric Condensing Dryer
What Kenmore Says to Check First
- Dryer not heating. Kenmore says to check for a tripped breaker or blown fuse and, on gas models, confirm the gas supply is on, noting an electric dryer can tumble without heat on a partial circuit. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer won't start. Kenmore says to confirm the cord is fully plugged into a grounded outlet and the breaker is intact, and to turn off Control Lock if buttons beep but nothing happens. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Kenmore Dryer Error Codes
| Code | What it means |
|---|---|
| d80 / d90 / d95 (Elite steam dryers) | The exhaust ductwork is roughly 80, 90 or 95 percent blocked; stop using the dryer until the vent is cleaned or repaired. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| tE1-tE7 (Elite steam dryers) | A temperature sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| HS (Elite steam dryers) | The humidity (moisture) sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore Dryer Problems Worth a Service Call
- Clothes still damp after a full cycle
- Drum will not turn even though you hear a hum
- Drum turns but the air stays cool
How a Dryer Service Call Usually Goes in Safety Harbor
Care Kenmore Recommends for Its Dryers
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
- Use only 4-inch rigid or semi-rigid metal duct (no plastic or foil), check it for lint monthly and clean it at least yearly; one Elite steam model allows about 65 feet with no elbows and 28 feet with four 90-degree elbows using a 4-inch hood. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Budgeting for a Kenmore Dryer Repair
Most Kenmore dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- The brand, model and serial number from the label inside the door or on the back panel
- How long the vent run is and where it exits the house
- Any error code on the display
Local Notes for Safety Harbor
Most dryer calls in Safety Harbor come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Florida's construction licensing guidance says that paid work such as installing a dishwasher connected to drinking water or replacing a water heater requires a licensed contractor, and that a local business tax receipt or certificate of competency may also apply; it does not describe a separate state appliance repair license. Source: DBPR License Requirements and Exemptions (Construction Industry Licensing Board), posted by Columbia County
LP gas businesses are licensed by the Florida Department of Agriculture and Consumer Services; its Category V LP gas installer license covers installing and servicing LP gas appliances, piping and equipment. Source: Florida Statutes Chapter 527, Sale of Liquefied Petroleum Gas
Questions to Ask a Safety Harbor Technician
- If a part has to be ordered, how soon can you come back to finish?
- Will you check the vent and lint path as part of the visit?
- How often do you repair Kenmore dryers, and do you carry common parts on the truck?
Kenmore Dryer Repair FAQs: Safety Harbor, FL
Why is my dryer running but not heating?
Why does my Kenmore dryer show an error code?
Why do my clothes come out damp?
Should I repair or replace my Kenmore dryer?
More Laundry Repair in Safety Harbor, FL
More Kenmore Dryer Repair Pages Nearby
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a Kenmore repair.