Kenmore Dryer Repair in Glen Carbon, IL

Most Kenmore dryer repairs in Glen Carbon involve the same few systems: heat, airflow, the drum drive and the controls. The Glen Carbon list starts with companies that name Kenmore, followed by other appliance repair companies that list dryer work.

Washer and Dryer Repair is independent and not affiliated with Kenmore. Listed companies are independent technicians who repair Kenmore dryers and other brands.

Kenmore dryers were made for Sears by several manufacturers over the years, so the model number matters more than the badge. Independent technicians can look up the parts from it.

Independent Kenmore Dryer Technicians, Glen Carbon IL

Our data shows 40 appliance repair companies inside a 30-mile radius of Glen Carbon. Other nearby bases include St. Louis (12), Alton (4), and Belleville (4). The farthest listed company is about 18 miles out. None of the companies within 30 miles mention Kenmore by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. The closest is Hoffmann Brothers, about 2.8 miles away. Across 29 rated companies, the average public rating is 4.1 stars.

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

The leading options for Glen Carbon are Sears Appliance Repair (68.0 miles away, based in Jacksonville, 4.3 stars from 45 reviews, lists Saturday hours); Sears Appliance Repair (71.2 miles away, based in Perryville, 4.6 stars from 132 reviews, lists Saturday hours); Hoffmann Brothers (2.8 miles away, based in Edwardsville, 4.9 stars from 5,567 reviews, lists Saturday hours); Mr. Appliance of Mid America (12.2 miles away, based in Fairview Heights, 4.8 stars from 1,246 reviews, lists Saturday hours).

Know Your Kenmore Dryer

What Makes Kenmore Dryer Repairs Different

Kenmore's compact condensing dryer needs no outside wall vent, runs on a 220V supply and offers manual-drain or direct-drain water removal. Source: Kenmore - 4.0 cu. ft. Front-Load Electric Condensing Dryer

On Kenmore Elite steam dryers, the display reports ductwork restriction in steps (d80, d90, d95) and a blinking CHECK VENT, which the guide says is an exhaust problem rather than a dryer failure. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)

What Kenmore Says to Check First

• Dryer not heating. Kenmore says to check for a tripped breaker or blown fuse and, on gas models, confirm the gas supply is on, noting an electric dryer can tumble without heat on a partial circuit. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
• Check Vent light blinking. Kenmore says the exhaust is seriously restricted and the ducts should be cleaned and inspected before using the dryer again. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)

Reading a Kenmore Dryer Error Code

Kenmore smart washers and dryers can check diagnostics through the Kenmore Smart app or Alexa and send app notices about blocked filters and other machine issues. Source: Kenmore - Kenmore Elite 81782 Smart 7.4 cu. ft. Electric Dryer with Accela Steam

When to Call for Kenmore Dryer Repair

• Dryer shuts off a few minutes into the cycle
• Clothes still damp after a full cycle
• Outside of the cabinet gets unusually hot

What a Dryer Repair Technician Checks

Keeping a Kenmore Dryer Running

• If the lint screen looks clogged when held to the light, scrub it with hot soapy water and a stiff brush and let it dry fully before reinstalling. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
• Use only 4-inch rigid or semi-rigid metal duct (no plastic or foil), check it for lint monthly and clean it at least yearly; one Elite steam model allows about 65 feet with no elbows and 28 feet with four 90-degree elbows using a 4-inch hood. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)

Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.

What Kenmore Dryer Repairs Cost

A Kenmore dryer repair usually costs about the same as any other brand for the same part. Published ranges:

• Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
• Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
• Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
• Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
• Typical dryer repair (most homeowners): $100–$430 Source: Angi - How Much Does Dryer Repair Cost?
• Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?

A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?

Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.

What to Have Ready for a Kenmore Dryer Call

• The brand, model and serial number from the label inside the door or on the back panel
• Whether the dryer is gas or electric
• Any error code on the display

Dryer Notes for Glen Carbon, IL

Most dryer calls in Glen Carbon come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.

Questions to Ask a Glen Carbon Technician

• If a part has to be ordered, how soon can you come back to finish?
• Can you give a written estimate before ordering parts?
• Do you work on gas dryers, and who handles anything involving the gas line?

Kenmore Dryer Repair FAQs: Glen Carbon, IL

Related Repair Pages for Glen Carbon

Kenmore Dryer Repair Near Glen Carbon

Before you call, find the model and serial number on your Kenmore dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.