Kenmore owners in Franklin usually want two things from a repair company: experience with the brand and quick access to parts. We flag companies whose listing or website mentions Kenmore and fill in with nearby dryer repair companies so you always have options.
This is an independent directory. We are not affiliated with Kenmore, and the technicians listed are independent repair companies, not the manufacturer.
Kenmore appliances were sold through Sears for decades, so many owners look for Sears dryer repair. The companies here are independent technicians who work on Kenmore and Kenmore Elite dryers; they are not Sears.
Who Works on Kenmore Dryers Near Franklin
Our data shows 40 appliance repair companies inside a 30-mile radius of Franklin. 2 of them are based in Franklin itself, and other nearby bases include Framingham (7), Pawtucket (7), and Bellingham (4). The farthest listed company is about 15 miles out. Nearest on the list: Franklin Appliance Repair, around 1.0 miles out. No company within 30 miles of Franklin names Kenmore in its listing, so the list adds matches from farther out and the closest appliance repair companies. The 28 rated companies in range average 4.3 stars.
Companies are shown by relevance and distance from Franklin. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Distance to the three closest (mi) | 1.0, 3.3, 5.0 |
|---|---|
| Companies within 30 miles | 60 |
| With 4.5+ stars and at least 10 reviews | 21 |
| Open on Saturdays (per listing) | 40 |
| List dryer or washer & dryer work | 15 |
| Mention Kenmore | 0 |
The leading options for Franklin are Sears Appliance Repair (56.8 miles away, based in Newburyport, 4.6 stars from 321 reviews, lists Saturday hours); Manny's Appliances (13.1 miles away, based in Framingham, 4.9 stars from 250 reviews, lists Saturday hours); Wickford Appliance - Outlet Store (11.5 miles away, based in Cumberland, 4.9 stars from 769 reviews, lists Saturday hours); Yale Appliance (14.7 miles away, based in Framingham, 4.9 stars from 2,215 reviews, lists Saturday hours).
Kenmore Dryer Features Technicians Work On
What a Kenmore Dryer Technician Deals With
Kenmore's compact condensing dryer needs no outside wall vent, runs on a 220V supply and offers manual-drain or direct-drain water removal. Source: Kenmore - 4.0 cu. ft. Front-Load Electric Condensing Dryer
SmartDry Ultra dryers combine two moisture sensors with a temperature monitor and a dual heating element to fine-tune heat and cycle length. Source: Kenmore - 8.8 cu. ft. Electric Dryer w/ SmartDry Ultra Technology
Common Kenmore Dryer Problems
- Dryer vibrating or noisy. Kenmore says to level the dryer on its four feet without extending them more than needed and keep at least an inch of clearance at the sides and back. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer takes too long to dry. Kenmore says to clean the lint filter of lint and softener residue and check the exhaust duct for buildup or excess length. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Dryer Codes Mean
| Code | What it means |
|---|---|
| CL (Elite steam dryers) | Control Lock is on. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| CHECK FILTER (Elite steam dryers) | A reminder to clean the lint filter before the load. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| HS (Elite steam dryers) | The humidity (moisture) sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Signs Your Kenmore Dryer Needs a Technician
- Drum turns but the air stays cool
- Outside of the cabinet gets unusually hot
- Dryer will not start when you press Start
What Gets Fixed on a Franklin Dryer Call
Owner Care for Kenmore Dryers
- If the lint screen looks clogged when held to the light, scrub it with hot soapy water and a stiff brush and let it dry fully before reinstalling. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
What Kenmore Dryer Repairs Cost
A Kenmore dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair (most homeowners): $100–$430 Source: Angi - How Much Does Dryer Repair Cost?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- Any error code on the display
- Whether the dryer is gas or electric
Dryer Notes for Franklin, MA
Most dryer calls in Franklin come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Massachusetts does not issue a separate appliance repair license; running fuel gas piping to appliances and installing their vent piping is gas fitting work that requires a license from the Board of State Examiners of Plumbers and Gas Fitters. Source: Plumbers and gas fitters consumer fact sheet (Mass.gov)
Gas piping to appliances must be done by a licensed gas fitter or a licensed master or journeyman plumber, under a permit from the local inspector, with licensing by the Board of State Examiners of Plumbers and Gas Fitters. Source: Plumbers and gas fitters consumer fact sheet (Mass.gov)
Questions to Ask a Franklin Technician
- What guarantee do you give on parts and labor?
- If a part has to be ordered, how soon can you come back to finish?
- Do you work on gas dryers, and who handles anything involving the gas line?
Kenmore Dryer Repair FAQs: Franklin, MA
Which Franklin technicians work on Kenmore?
Do you work for Kenmore?
Why does my dryer take so long to dry?
Should I repair or replace my Kenmore dryer?
Related Repair Pages for Franklin
Kenmore Dryer Repair Near Franklin
Before you call, find the model and serial number on your Kenmore dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.