Most Kenmore dryer repairs in Bedford involve the same few systems: heat, airflow, the drum drive and the controls. We flag companies whose listing or website mentions Kenmore and fill in with nearby dryer repair companies so you always have options.
This is an independent directory. We are not affiliated with Kenmore, and the technicians listed are independent repair companies, not the manufacturer.
Kenmore appliances were sold through Sears for decades, so many owners look for Sears dryer repair. The companies here are independent technicians who work on Kenmore and Kenmore Elite dryers; they are not Sears.
Kenmore Dryer Repair Near Bedford
Our data shows 40 appliance repair companies inside a 30-mile radius of Bedford. Other nearby bases include Cleveland (18), Parma (3), and Cleveland Heights (2). Distances run up to about 12 miles. No company within 30 miles of Bedford names Kenmore in its listing, so the list adds matches from farther out and the closest appliance repair companies. Nearest on the list: FixCo, around 1.7 miles out. The 36 rated companies in range average 4.5 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| List dryer or washer & dryer work | 11 |
|---|---|
| Mention Kenmore | 0 |
| Open on Saturdays (per listing) | 36 |
| Companies within 30 miles | 60 |
| Three nearest companies, miles away | 1.7, 3.2, 3.4 |
| With 4.5+ stars and at least 10 reviews | 25 |
Closest matches for Bedford: Sears Appliance Repair (79.5 miles away, based in Coshocton, 4.5 stars from 28 reviews, lists Saturday hours); Margus Appliance Repair (7.7 miles away, based in Parma, 4.9 stars from 202 reviews, lists Saturday hours); Sears Appliance Repair (10.7 miles away, based in Richmond Heights, 4.7 stars from 229 reviews, lists Saturday hours); Mr. Appliance of Cleveland (7.7 miles away, based in Brooklyn Heights, 4.7 stars from 1,919 reviews, lists Saturday hours).
Know Your Kenmore Dryer
What a Kenmore Dryer Technician Deals With
Accela Steam dryers connect directly to the household water supply, so the inlet hose and water pressure (20 to 120 psi) become part of a steam-dryer service check. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Says to Check First
- Dryer vibrating or noisy. Kenmore says to level the dryer on its four feet without extending them more than needed and keep at least an inch of clearance at the sides and back. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer takes too long to dry. Kenmore says to clean the lint filter of lint and softener residue and check the exhaust duct for buildup or excess length. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Dryer Codes Mean
| Code | What it means |
|---|---|
| HS (Elite steam dryers) | The humidity (moisture) sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| PF / nP (Elite steam dryers) | A power supply or cord connection problem; check the cord at the terminal block and the house fuse or breaker. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| gAS (Elite steam dryers) | The gas supply is off on a gas model; open the house and dryer gas shutoffs. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore smart washers and dryers can check diagnostics through the Kenmore Smart app or Alexa and send app notices about blocked filters and other machine issues. Source: Kenmore - Kenmore Elite 81782 Smart 7.4 cu. ft. Electric Dryer with Accela Steam
Kenmore Dryer Problems Worth a Service Call
- Cycles take two or three runs to finish
- Burning or hot smell during a cycle
- Dryer will not start when you press Start
How a Dryer Service Call Usually Goes in Bedford
Care Kenmore Recommends for Its Dryers
- If the lint screen looks clogged when held to the light, scrub it with hot soapy water and a stiff brush and let it dry fully before reinstalling. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
What Kenmore Dryer Repairs Cost
A Kenmore dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- Whether the dryer is gas or electric
- The brand, model and serial number from the label inside the door or on the back panel
- How long the vent run is and where it exits the house
What Bedford Owners Should Know
Most dryer calls in Bedford come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Ohio has no state license for appliance repair; the Ohio Construction Industry Licensing Board licenses commercial contractors in plumbing, hydronics, refrigeration, HVAC and electrical, and residential contractor work is generally overseen locally. Source: Ohio Department of Commerce: OCILB Contractor Complaint Form
At the state level, the Ohio Construction Industry Licensing Board licenses commercial plumbing, hydronics and HVAC contractors; for residential work the state board may lack authority, and local building departments handle code compliance and any local contractor licensing. Source: Ohio Department of Commerce: OCILB Contractor Complaint Form
Questions to Ask a Bedford Technician
- Will you check the vent and lint path as part of the visit?
- Is your company licensed where my state requires it, and insured?
- How often do you repair Kenmore dryers, and do you carry common parts on the truck?
Kenmore Dryer Repair FAQs: Bedford, OH
Is this Kenmore customer service?
Is my Kenmore dryer worth repairing?
Which Bedford technicians work on Kenmore?
What makes a dryer stop heating?
Related Repair Pages for Bedford
More Kenmore Dryer Repair Pages Nearby
Before you call, find the model and serial number on your Kenmore dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.