A Kenmore dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. Below are independent repair companies serving Plain City, with those that mention Kenmore first, then the nearest dryer repair companies.
This is an independent directory. We are not affiliated with Kenmore, and the technicians listed are independent repair companies, not the manufacturer.
Kenmore appliances were sold through Sears for decades, so many owners look for Sears dryer repair. The companies here are independent technicians who work on Kenmore and Kenmore Elite dryers; they are not Sears.
Independent Kenmore Dryer Technicians, Plain City UT
Within 30 miles of Plain City there are 21 appliance repair companies in our data. The rest are spread across Ogden (3), Clearfield (3), and North Ogden (2). Distances run up to about 29 miles. Nearest on the list: Ben Lomond Appliance Repair llc, around 5.9 miles out. None of the repair companies near Plain City name Kenmore in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. Rated companies nearby average 4.3 stars across 14 businesses.
Companies are shown by relevance and distance from Plain City. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| List dryer or washer & dryer work | 1 |
|---|---|
| Mention Kenmore | 0 |
| Open on Saturdays (per listing) | 12 |
| With 4.5+ stars and at least 10 reviews | 8 |
| Appliance repair companies in range (30 mi) | 21 |
| Distance to the three closest (mi) | 5.9, 6.0, 8.5 |
Closest matches for Plain City: R.A.C.E.R. Service Appliance Repair (28.6 miles away, based in Nibley, 4.7 stars from 12 reviews); iFiX, LLC (10.2 miles away, based in Riverdale, 4.9 stars from 436 reviews); Ben Lomond Appliance Repair llc (5.9 miles away, based in North Ogden, 5.0 stars from 155 reviews, lists Saturday hours); Ebenezer Appliance Repair (8.8 miles away, based in Ogden, 4.7 stars from 25 reviews).
Know Your Kenmore Dryer
What Makes Kenmore Dryer Repairs Different
Kenmore's Check Vent sensor alerts the owner when the dryer is not moving enough air to the outside. Source: Kenmore - Laundry List: Kenmore Dryer Buying Guide
Common Kenmore Dryer Problems
- Dryer takes too long to dry. Kenmore says to clean the lint filter of lint and softener residue and check the exhaust duct for buildup or excess length. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer not heating. Kenmore says to check for a tripped breaker or blown fuse and, on gas models, confirm the gas supply is on, noting an electric dryer can tumble without heat on a partial circuit. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Dryer Codes Mean
| Code | What it means |
|---|---|
| PS (Elite steam dryers) | The power cord on an electric model is wired incorrectly; check the neutral on the center terminal. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| PF / nP (Elite steam dryers) | A power supply or cord connection problem; check the cord at the terminal block and the house fuse or breaker. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| CL (Elite steam dryers) | Control Lock is on. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore smart washers and dryers can check diagnostics through the Kenmore Smart app or Alexa and send app notices about blocked filters and other machine issues. Source: Kenmore - Kenmore Elite 81782 Smart 7.4 cu. ft. Electric Dryer with Accela Steam
Signs Your Kenmore Dryer Needs a Technician
- Clothes still damp after a full cycle
- Outside of the cabinet gets unusually hot
- Squealing, thumping or grinding while it runs
What a Dryer Repair Technician Checks
Owner Care for Kenmore Dryers
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
- Use only 4-inch rigid or semi-rigid metal duct (no plastic or foil), check it for lint monthly and clean it at least yearly; one Elite steam model allows about 65 feet with no elbows and 28 feet with four 90-degree elbows using a 4-inch hood. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
What Kenmore Dryer Repairs Cost
Price the repair before replacing a Kenmore dryer. Published ranges for common jobs:
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a Kenmore Dryer Call
- Whether the dryer is gas or electric
- The brand, model and serial number from the label inside the door or on the back panel
- How long the vent run is and where it exits the house
Dryer Notes for Plain City, UT
Most dryer calls in Plain City come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
Gas appliance and combustion system work, starting at the outlet of the gas meter, falls under DOPL's construction trades licensing, and the qualifier for an HVAC contractor license must be a Certified Natural Gas Technician. Source: DOPL Contractor Classifications
How to Choose a Dryer Technician Near Plain City
- Do you work on gas dryers, and who handles anything involving the gas line?
- How often do you repair Kenmore dryers, and do you carry common parts on the truck?
- What guarantee do you give on parts and labor?
Kenmore Dryer Repair FAQs: Plain City, UT
What should I do about a Kenmore error code?
Why does my dryer take so long to dry?
How do I find a technician who knows Kenmore dryers?
Other Dryer Repair in Plain City
More Kenmore Dryer Repair Pages Nearby
Before you call, find the model and serial number on your Kenmore dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.