Most Samsung dryer repairs in Madison involve the same few systems: heat, airflow, the drum drive and the controls. Below are independent repair companies serving Madison, with those that mention Samsung first, then the nearest dryer repair companies.
This is an independent directory. We are not affiliated with Samsung, and the technicians listed are independent repair companies, not the manufacturer.
Samsung Dryer Repair Near Madison
Our data shows 37 appliance repair companies inside a 30-mile radius of Madison. 3 of them are based in Madison itself, and the rest are spread across Jackson (20), Brandon (6), and Pearl (4). Distances run up to about 22 miles. Nearest on the list: Brent's Appliance Repair, around 0.4 miles out. None of the repair companies near Madison name Samsung in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. Rated companies nearby average 4.7 stars across 36 businesses.
Companies are shown by relevance and distance from Madison. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Show laundry appliance work | 2 |
|---|---|
| Listing Saturday hours | 19 |
| With 4.5+ stars and at least 10 reviews | 3 |
| Companies within 30 miles | 37 |
| Three nearest companies, miles away | 0.4, 1.2, 2.1 |
| Mention Samsung | 0 |
Closest matches for Madison: Mr. Appliance of Madison (2.1 miles away, 4.5 stars from 179 reviews); Sears Appliance Repair (3.7 miles away, based in Ridgeland, 4.1 stars from 321 reviews, lists Saturday hours); Emergency Appliance Repair Services (1.2 miles away, 5.0 stars from 3 reviews); Brent's Appliance Repair (0.4 miles away, 4.6 stars from 7 reviews, lists Saturday hours).
Samsung Dryer Features Technicians Work On
What a Samsung Dryer Technician Deals With
The Bespoke AI Laundry Combo uses a ventless heat pump to dry inside the same drum used for washing, so there is no exhaust duct to service. Source: Samsung Newsroom US - Samsung expands Bespoke AI laundry line
What Samsung Says to Check First
- Dryer won't start or tumble. Look for an error code or blinking lights first, then make sure Child Lock is off and try a Time Dry test. Source: Samsung US - Samsung dryer turns on but will not start or spin
- Dryer not heating. Run Time Dry briefly to confirm there is no heat, then check the 240V outlet or gas supply, cycle the breaker, and run the vent blockage test. Source: Samsung US - Clothes are not dry after using Samsung dryer
What Samsung Dryer Codes Mean
| Code | What it means |
|---|---|
| CL | Child Lock is turned on. Source: Samsung US - Samsung dryer displays an error code |
| C1 / CL1 | Laundry detected in the drum during the vent test. Source: Samsung US - Samsung dryer displays an error code |
| CLg / C80 / C90 | Vent blockage detected; clean the lint filter and exhaust vent. Source: Samsung US - Samsung dryer displays an error code |
Full list: Samsung Dryer Error Codes Explained.
Signs Your Samsung Dryer Needs a Technician
- Clothes still damp after a full cycle
- Squealing, thumping or grinding while it runs
- Outside of the cabinet gets unusually hot
How a Dryer Service Call Usually Goes in Madison
Keeping a Samsung Dryer Running
- Clean the lint filter before or after every drying cycle. Source: Samsung US - Clothes are not dry after using Samsung dryer
- Keep the exhaust vent sealed, unkinked and made of proper material rather than plastic or foil, and within the maximum length in the manual, remembering that each 90-degree turn cuts the allowed length by 6 feet. Source: Samsung US - Clothes are not dry after using Samsung dryer
Brand guides: Samsung Dryer Not Heating: Causes and Fixes, Samsung Dryer Not Drying: What to Check, Samsung Dryer Error Codes Explained.
Budgeting for a Samsung Dryer Repair
Most Samsung dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- How long the vent run is and where it exits the house
- Whether the dryer is gas or electric
- What happens when you press Start (no response, hum, runs with no heat, stops early)
What Madison Owners Should Know
Most dryer calls in Madison come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Mississippi's State Board of Contractors has no appliance repair classification; it licenses mechanical, HVAC and plumbing contractors, with residential mechanical and plumbing subcontractors required to hold a license. Source: MSBOC: Classifications
Natural gas and liquefied petroleum gas line work falls under the State Board of Contractors' Mechanical classification, while its Plumbing classification excludes fuel gas. Source: MSBOC: Classifications
Hiring a Dryer Repair Company in Madison
- Can you give a written estimate before ordering parts?
- Can you look at the washer on the same visit if it is acting up too?
- Is your company licensed where my state requires it, and insured?
Samsung Dryer Repair FAQs: Madison, MS
Why does my dryer take so long to dry?
What should I do about a Samsung error code?
What makes a dryer stop heating?
Related Repair Pages for Madison
Samsung Dryer Repair in Nearby Cities
Write down any error code your Samsung dryer shows and when it appears. It helps a Madison technician bring the right parts.