A Amana dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. Below are independent repair companies serving Glendale, with those that mention Amana first, then the nearest dryer repair companies.
Washer and Dryer Repair is independent and not affiliated with Amana. Listed companies are independent technicians who repair Amana dryers and other brands.
Who Works on Amana Dryers Near Glendale
Our data shows 40 appliance repair companies inside a 30-mile radius of Glendale. 25 of them are based in Glendale itself, and other nearby bases include Peoria (10), Sun City (3), and El Mirage (1). 1 of them mentions Amana in their listing or website. Nearest on the list: CCO Appliance Repair, around 0.5 miles out. Rated companies nearby average 4.6 stars across 31 businesses.
Companies are shown by relevance and distance from Glendale. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Companies within 30 miles | 60 |
|---|---|
| Mention Amana | 1 |
| Listing Saturday hours | 37 |
| List dryer or washer & dryer work | 12 |
| With 4.5+ stars and at least 10 reviews | 20 |
| Distance to the three closest (mi) | 0.5, 0.5, 1.1 |
At the top of the Glendale list: Glendale Amana Repair (4.7 miles away, 4.6 stars from 11 reviews); Appliance Works (3.2 miles away, based in Sun City, 5.0 stars from 376 reviews); 5 Star Appliance Repair LLC (3.6 miles away, 4.8 stars from 62 reviews, lists Saturday hours); Mr. Appliance of Surprise and Goodyear (3.2 miles away, based in Sun City, 4.8 stars from 832 reviews, lists Saturday hours).
Amana Dryer Features Technicians Work On
What a Amana Dryer Technician Deals With
Electric Amana dryers run on a 240-volt supply with two 30-amp breakers, one for the motor and one for the heating element, so a single tripped breaker can stop heating. Source: Amana Product Help - Dryer is Not Heating
Amana Dryer Symptoms and First Checks
- Load too hot. Amana recommends letting the Cool Down portion finish and using a lower temperature or an automatic dry cycle. Source: Amana - Electronic Dryer Use and Care Guide
- Cycle ends too soon. Amana says the load may not be touching the sensor strips, so level the dryer and use Timed Dry or a different dryness level for very small loads. Source: Amana - Electronic Dryer Use and Care Guide
When to Call for Amana Dryer Repair
- Drum will not turn even though you hear a hum
- Clothes still damp after a full cycle
- Drum turns but the air stays cool
What Gets Fixed on a Glendale Dryer Call
Keeping a Amana Dryer Running
- Clean the lint screen before every load and never run the dryer with a loose, damaged, blocked or missing screen. Source: Amana - Electronic Dryer Use and Care Guide
- Every six months, or sooner if lint falls off during use, wash the lint screen with hot water, liquid detergent and a nylon brush to remove residue. Source: Amana - Electronic Dryer Use and Care Guide
Budgeting for a Amana Dryer Repair
Price the repair before replacing a Amana dryer. Published ranges for common jobs:
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair: $100–$200 Source: Fixr - How much does it cost to repair a dryer?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- The brand, model and serial number from the label inside the door or on the back panel
- Any error code on the display
- Whether the dryer is gas or electric
Around Glendale
Most dryer calls in Glendale come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Arizona has no appliance-repair-specific license; work is regulated through Registrar of Contractors classifications, and state law removes the small-job (under $1,000) handyman exemption for any work connecting or repairing appliances on natural gas or propane. Source: A.R.S. 32-1121 - Persons not required to be licensed
The Arizona Registrar of Contractors licenses gas piping and gas appliance work under its plumbing classifications (such as C-37 and R-37), which cover piping and appliances for natural and manufactured gas. Source: License Classifications - Arizona Registrar of Contractors
Before You Book in Glendale
- How often do you repair Amana dryers, and do you carry common parts on the truck?
- Will you check the vent and lint path as part of the visit?
- What guarantee do you give on parts and labor?
Amana Dryer Repair FAQs: Glendale, AZ
Why does my dryer take so long to dry?
Should I repair or replace my Amana dryer?
Do you work for Amana?
More Laundry Repair in Glendale, AZ
Amana Dryer Repair Near Glendale
Before you call, find the model and serial number on your Amana dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.