Most Amana dryer repairs in Sandy Springs involve the same few systems: heat, airflow, the drum drive and the controls. Below are independent repair companies serving Sandy Springs, with those that mention Amana first, then the nearest dryer repair companies.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by Amana. If your dryer is still under manufacturer coverage, contact Amana directly.
Independent Amana Dryer Technicians, Sandy Springs GA
Our data shows 40 appliance repair companies inside a 30-mile radius of Sandy Springs. 3 of them are based in Sandy Springs itself, and the rest are spread across Atlanta (21), Roswell (8), and Marietta (4). The closest is AK Appliance Repair, about 0.5 miles away. No company within 90 miles of Sandy Springs mentions Amana by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Across 31 rated companies, the average public rating is 4.6 stars.
Companies are shown by relevance and distance from Sandy Springs. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Show laundry appliance work | 21 |
|---|---|
| Open on Saturdays (per listing) | 43 |
| With 4.5+ stars and at least 10 reviews | 27 |
| Repair companies inside 30 miles | 60 |
| Mention Amana | 0 |
| Distance to the three closest (mi) | 0.5, 1.0, 1.3 |
The leading options for Sandy Springs are Comfort Appliance Repair of Atlanta (5.4 miles away, based in Chamblee, 4.9 stars from 1,720 reviews, lists Saturday hours); Mama Bear Dryer Vent Cleaning (8.0 miles away, based in Marietta, 5.0 stars from 561 reviews, lists Saturday hours); AK Appliance Repair (0.5 miles away, 4.7 stars from 151 reviews, lists Saturday hours); Flamingo Appliance Service of Georgia (6.7 miles away, based in Atlanta, 4.2 stars from 2,080 reviews).
Know Your Amana Dryer
What a Amana Dryer Technician Deals With
The dryer needs a room temperature above 45°F to dry properly, and closet installs need adequate ventilation. Source: Amana - Electronic Dryer Use and Care Guide
What Amana Says to Check First
- Dryer not heating. Amana says to check both 30-amp breakers and the 240-volt supply on electric models, or that the gas shutoff valve is open on gas models, and make sure an air-only cycle isn't selected. Source: Amana Product Help - Dryer is Not Heating
- Dryer won't start. Amana says to press and hold Start for two to five seconds first, then check the fuses or breakers, the door latch, the cycle selection and whether the controls are locked. Source: Amana Product Help - Dryer Not Starting or No Operation
When to Call for Amana Dryer Repair
- Outside of the cabinet gets unusually hot
- Squealing, thumping or grinding while it runs
- Clothes still damp after a full cycle
Inside a Dryer Repair Visit
Keeping a Amana Dryer Running
- Clean the full vent run, including the exhaust hood, at least every two years, or sooner if drying slows down. Source: Amana - Electronic Dryer Use and Care Guide
- Every six months, or sooner if lint falls off during use, wash the lint screen with hot water, liquid detergent and a nylon brush to remove residue. Source: Amana - Electronic Dryer Use and Care Guide
Budgeting for a Amana Dryer Repair
Price the repair before replacing a Amana dryer. Published ranges for common jobs:
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- Whether the dryer is gas or electric
- How long the vent run is and where it exits the house
Dryer Notes for Sandy Springs, GA
Most dryer calls in Sandy Springs come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Georgia has no appliance repair license; the Secretary of State's construction-related licensing boards cover conditioned air, electrical, plumbing, low voltage, utility and residential/general contractors, with no separate appliance category. Source: Georgia Licensing Boards (Georgia Secretary of State)
Georgia lists the International Fuel Gas Code among its mandatory state minimum construction codes, and permitting and inspection of gas work is handled by the local governments that enforce those codes. Source: Mandatory and Permissive State Codes (Georgia Department of Community Affairs)
Questions to Ask a Sandy Springs Technician
- If a part has to be ordered, how soon can you come back to finish?
- What guarantee do you give on parts and labor?
- How often do you repair Amana dryers, and do you carry common parts on the truck?
Amana Dryer Repair FAQs: Sandy Springs, GA
How do I find a technician who knows Amana dryers?
Why is my dryer running but not heating?
Do you work for Amana?
What should I do about a Amana error code?
Related Repair Pages for Sandy Springs
Amana Dryer Repair Near Sandy Springs
Write down any error code your Amana dryer shows and when it appears. It helps a Sandy Springs technician bring the right parts.