A Amana dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. We flag companies whose listing or website mentions Amana and fill in with nearby dryer repair companies so you always have options.
Washer and Dryer Repair is independent and not affiliated with Amana. Listed companies are independent technicians who repair Amana dryers and other brands.
Who Works on Amana Dryers Near American Fork
Our data shows 40 appliance repair companies inside a 30-mile radius of American Fork. 5 list an address in American Fork, and the rest are spread across Orem (9), Lehi (5), and Saratoga Springs (4). Distances run up to about 11 miles. None of the repair companies near American Fork name Amana in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. Nearest on the list: Appliance Repair Tech American Fork, around 0.3 miles out. The 25 rated companies in range average 4.6 stars.
Companies are shown by relevance and distance from American Fork. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Rated 4.5 stars or higher (10+ reviews) | 8 |
|---|---|
| Mention Amana | 0 |
| Open on Saturdays (per listing) | 42 |
| Three nearest companies, miles away | 0.3, 0.6, 0.8 |
| List dryer or washer & dryer work | 3 |
| Repair companies inside 30 miles | 60 |
Closest matches for American Fork: Brothers Masters (8.7 miles away, based in Provo, 5.0 stars from 30 reviews, lists Saturday hours); Refrigerate (4.4 miles away, based in Lindon, 4.0 stars from 297 reviews, lists Saturday hours); Vertex Appliance Repair (7.5 miles away, based in Saratoga Springs, 4.9 stars from 172 reviews); Premier Appliance Repair Draper (9.3 miles away, based in Draper, 5.0 stars from 7 reviews, lists Saturday hours).
Know Your Amana Dryer
How Amana Dryers Are Built
Electric Amana dryers run on a 240-volt supply with two 30-amp breakers, one for the motor and one for the heating element, so a single tripped breaker can stop heating. Source: Amana Product Help - Dryer is Not Heating
Amana Dryer Symptoms and First Checks
- Load too hot. Amana recommends letting the Cool Down portion finish and using a lower temperature or an automatic dry cycle. Source: Amana - Electronic Dryer Use and Care Guide
- Dryer not heating. Amana says to check both 30-amp breakers and the 240-volt supply on electric models, or that the gas shutoff valve is open on gas models, and make sure an air-only cycle isn't selected. Source: Amana Product Help - Dryer is Not Heating
Signs Your Amana Dryer Needs a Technician
- Dryer will not start when you press Start
- Cycles take two or three runs to finish
- Outside of the cabinet gets unusually hot
What Gets Fixed on a American Fork Dryer Call
Care Amana Recommends for Its Dryers
- Every six months, or sooner if lint falls off during use, wash the lint screen with hot water, liquid detergent and a nylon brush to remove residue. Source: Amana - Electronic Dryer Use and Care Guide
- Clean the lint screen before every load and never run the dryer with a loose, damaged, blocked or missing screen. Source: Amana - Electronic Dryer Use and Care Guide
What Amana Dryer Repairs Cost
Price the repair before replacing a Amana dryer. Published ranges for common jobs:
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair (most homeowners): $100–$430 Source: Angi - How Much Does Dryer Repair Cost?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- The brand, model and serial number from the label inside the door or on the back panel
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- Any error code on the display
Dryer Notes for American Fork, UT
Most dryer calls in American Fork come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Questions to Ask a American Fork Technician
- Is your company licensed where my state requires it, and insured?
- Will you check the vent and lint path as part of the visit?
- Do you work on gas dryers, and who handles anything involving the gas line?
Amana Dryer Repair FAQs: American Fork, UT
Is this Amana customer service?
Is my Amana dryer worth repairing?
Which American Fork technicians work on Amana?
Why is my dryer running but not heating?
More Laundry Repair in American Fork, UT
Amana Dryer Repair Near American Fork
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a Amana repair.