Amana owners in Midvale usually want two things from a repair company: experience with the brand and quick access to parts. The Midvale list starts with companies that name Amana, followed by other appliance repair companies that list dryer work.
Washer and Dryer Repair is independent and not affiliated with Amana. Listed companies are independent technicians who repair Amana dryers and other brands.
Amana Dryer Repair Near Midvale
40 repair companies serve Midvale from within 30 miles. 6 list an address in Midvale, and the rest are spread across Sandy (14), West Jordan (7), and Taylorsville (3). Distances run up to about 5 miles. Nearest on the list: Quality Midvale Appliance Repair, around 0.4 miles out. No company within 90 miles of Midvale mentions Amana by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Across 23 rated companies, the average public rating is 4.7 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| With 4.5+ stars and at least 10 reviews | 13 |
|---|---|
| Mention Amana | 0 |
| Show laundry appliance work | 10 |
| Distance to the three closest (mi) | 0.4, 0.4, 0.8 |
| Open on Saturdays (per listing) | 40 |
| Repair companies inside 30 miles | 60 |
At the top of the Midvale list: PowerClean Appliance Repair (1.9 miles away, 4.9 stars from 949 reviews, lists Saturday hours); Famous Appliance Service (1.3 miles away, 4.6 stars from 805 reviews); Appliance Man (2.0 miles away, based in Sandy, 4.7 stars from 424 reviews, lists Saturday hours); Eagle Appliance Repair (2.7 miles away, based in West Jordan, 4.9 stars from 204 reviews, lists Saturday hours).
Amana Dryer Features Technicians Work On
What Makes Amana Dryer Repairs Different
Electric Amana dryers run on a 240-volt supply with two 30-amp breakers, one for the motor and one for the heating element, so a single tripped breaker can stop heating. Source: Amana Product Help - Dryer is Not Heating
Amana Dryer Symptoms and First Checks
- Dryer making noise. Amana says a thump after sitting unused usually fades, then to check the drum edges for coins or buttons and make sure all four legs are installed and the dryer is level. Source: Amana - Electronic Dryer Use and Care Guide
- Dryer not tumbling. Amana says to confirm the dryer has power, that Start was held for a few seconds with dry hands, and that the power cord is installed correctly. Source: Amana Product Help - Not Tumbling or Spinning - Dryer
Amana Dryer Problems Worth a Service Call
- Squealing, thumping or grinding while it runs
- Cycles take two or three runs to finish
- Outside of the cabinet gets unusually hot
Inside a Dryer Repair Visit
Keeping a Amana Dryer Running
- Clean the lint screen before every load and never run the dryer with a loose, damaged, blocked or missing screen. Source: Amana - Electronic Dryer Use and Care Guide
- Every six months, or sooner if lint falls off during use, wash the lint screen with hot water, liquid detergent and a nylon brush to remove residue. Source: Amana - Electronic Dryer Use and Care Guide
Budgeting for a Amana Dryer Repair
Most Amana dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- Any error code on the display
- How long the vent run is and where it exits the house
- Whether the dryer is gas or electric
Dryer Notes for Midvale, UT
Most dryer calls in Midvale come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
Gas appliance and combustion system work, starting at the outlet of the gas meter, falls under DOPL's construction trades licensing, and the qualifier for an HVAC contractor license must be a Certified Natural Gas Technician. Source: DOPL Contractor Classifications
Questions to Ask a Midvale Technician
- Do you work on gas dryers, and who handles anything involving the gas line?
- What guarantee do you give on parts and labor?
- Can you give a written estimate before ordering parts?
Amana Dryer Repair FAQs: Midvale, UT
What makes a dryer stop heating?
How do I find a technician who knows Amana dryers?
Should I repair or replace my Amana dryer?
Why do my clothes come out damp?
Other Dryer Repair in Midvale
More Amana Dryer Repair Pages Nearby
Write down any error code your Amana dryer shows and when it appears. It helps a Midvale technician bring the right parts.