Serving Howard, Wisconsin and nearby areas Helpline · (888) 772-9805
☎(888) 772-9805Call

Amana Dryer Repair in Howard, WI

A local list of independent Amana dryer technicians for Howard and the Brown County area, plus a helpline that connects you with one.

Amana dryer acting up in Howard?
Tell us the model and the problem and we will connect you with a local technician.
☎(888) 772-9805
✓10 companies listed for Howard✓Independent, not a manufacturer✓Public ratings & distances

A Amana dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. We flag companies whose listing or website mentions Amana and fill in with nearby dryer repair companies so you always have options.

This is an independent directory. We are not affiliated with Amana, and the technicians listed are independent repair companies, not the manufacturer.

Amana Dryer Repair Near Howard

Our data shows 27 appliance repair companies inside a 30-mile radius of Howard. Other nearby bases include Green Bay (12), Appleton (7), and De Pere (3). The farthest listed company is about 29 miles out. The closest is Engels Commercial Appliance / Engels Bar & Restaurant Supply, about 2.4 miles away. No company within 90 miles of Howard mentions Amana by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 4.5 stars across 25 businesses.

Washer & Dryer Repair
Mr. Appliance of Green Bay
444 Reid St Ste 300, De Pere, WI 54115
8.6 mi from Howard
★★★★★ 4.8 (428 reviews)
DryersWashersSaturday hours
Washer & Dryer Repair
Mr. Appliance of Appleton
N2235 W 41 Frontage Rd Unit 105, Kaukauna, WI 54130
18.5 mi from Howard
★★★★★ 4.9 (56 reviews)
DryersWashersSaturday hours
Washer & Dryer Repair
Heins Appliance
707 S Washington St, Shawano, WI 54166
29.1 mi from Howard
★★★★★ 4.9 (312 reviews)
DryersWashersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
1555 Green Bay Plaza, Green Bay, WI 54304
3.6 mi from Howard
★★★★ 3.9 (38 reviews)
DryersWashersSaturday hours
Appliance Repair
Classic Maytag/Appliance Service Professionals
1218 Military Ave, Green Bay, WI 54304
3.8 mi from Howard
★★★★½ 4.7 (62 reviews)
Mentions MaytagSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
4635 W College Ave, Appleton, WI 54914
28.5 mi from Howard
★★★★ 4.2 (70 reviews)
DryersWashersSaturday hours
Appliance Repair
Bay Tech Appliance Repair
926 Grosse Rd, Little Suamico, WI 54141
10.3 mi from Howard
★★★★★ 4.9 (29 reviews)
Appliance Repair
Falcon Appliance Repair Specialists
506 Redbird Cir, De Pere, WI 54115
9.4 mi from Howard
★★★★★ 5.0 (4 reviews)
Appliance Repair
HarrisonHome Appliance Repair Experts
1231 Military Ave, Green Bay, WI 54304
3.9 mi from Howard
★★★★★ 5.0 (3 reviews)
Saturday hours
Appliance Repair
Engels Commercial Appliance / Engels Bar & Restaurant Supply
120 Packerland Dr, Green Bay, WI 54303
2.4 mi from Howard
★★★★½ 4.3 (16 reviews)
Commercial

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

Howard repair companies in numbers
Show laundry appliance work6
Three nearest companies, miles away2.4, 3.1, 3.6
Repair companies inside 30 miles27
Listing Saturday hours11
Rated 4.5 stars or higher (10+ reviews)5
Mention Amana0

The leading options for Howard are Mr. Appliance of Green Bay (8.6 miles away, based in De Pere, 4.8 stars from 428 reviews, lists Saturday hours); Mr. Appliance of Appleton (18.5 miles away, based in Kaukauna, 4.9 stars from 56 reviews, lists Saturday hours); Heins Appliance (29.1 miles away, based in Shawano, 4.9 stars from 312 reviews, lists Saturday hours); Sears Appliance Repair (3.6 miles away, based in Green Bay, 3.9 stars from 38 reviews, lists Saturday hours).

⚡ Get connected with a Amana dryer technician near Howard
☎(888) 772-9805

Amana Dryer Lines and Features

6.5 cu. ft. top load matching dryers (NED4655EW / NGD4655EW)Amana's dial-control electric and gas dryers sized to pair with its top load washers.
Automatic Dryness ControlA sensing feature that ends the cycle when the load reaches the selected dryness to cut down on over-drying.

What Makes Amana Dryer Repairs Different

Automatic cycles rely on the load contacting the sensor strips in the drum, so an unlevel dryer or very small load can end the cycle early. Source: Amana - Electronic Dryer Use and Care Guide

Front load matching models are stackable and use electronic touch controls, while top load matching models use dial controls. Source: Amana - Dryer Comparison Chart

What Amana Says to Check First

  • Cycle ends too soon. Amana says the load may not be touching the sensor strips, so level the dryer and use Timed Dry or a different dryness level for very small loads. Source: Amana - Electronic Dryer Use and Care Guide
  • Clothes take too long to dry. Amana points to a dirty lint screen, overloading, a No Heat setting, or a vent that is clogged, crushed, kinked, too long or has too many turns. Source: Amana - Electronic Dryer Use and Care Guide

Signs Your Amana Dryer Needs a Technician

  • Dryer shuts off a few minutes into the cycle
  • Drum turns but the air stays cool
  • Clothes still damp after a full cycle

What Gets Fixed on a Howard Dryer Call

Moisture sensor and controlsSensor-dry cycles stop when two metal strips inside the drum read dry clothes. Fabric-softener film on those strips can end cycles early or let them run long, and a technician checks them before blaming the control board.
Drum belt, rollers and idler pulleySqueals, thumps and a drum that will not turn trace back to the belt, the drum support rollers, the idler pulley or the drum glides. These are wear parts and are often replaced together.

Owner Care for Amana Dryers

What Amana Dryer Repairs Cost

A Amana dryer repair usually costs about the same as any other brand for the same part. Published ranges:

Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?

Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.

Before the Technician Arrives

  • Any error code on the display
  • Whether the dryer is gas or electric
  • The brand, model and serial number from the label inside the door or on the back panel

Dryer Notes for Howard, WI

Most dryer calls in Howard come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.

Wisconsin has no separate appliance repair license; plumbing licensing covers appliances connected to water supply systems, including water heaters, but exempts minor repairs to appliances and repair or replacement of gas or electrical control valves and devices. Source: DSPS: Plumbing License Laws in Wisconsin

In Wisconsin, you can check a license with the Wisconsin DSPS LicensE credential lookup or report a problem to the Wisconsin Department of Agriculture, Trade and Consumer Protection (DATCP), Bureau of Consumer Protection.

Hiring a Dryer Repair Company in Howard

  • What guarantee do you give on parts and labor?
  • If a part has to be ordered, how soon can you come back to finish?
  • Is your company licensed where my state requires it, and insured?

Amana Dryer Repair FAQs: Howard, WI

What should I do about a Amana error code?
Write the code down, check the brand's guidance for it and clear simple causes such as a blocked vent. If the code returns, a technician can test the part the code points to.
Should I repair or replace my Amana dryer?
Compare the repair quote with the price of a comparable new dryer and consider its age. Belts, rollers, fuses and heating parts are modest repairs on a dryer that is otherwise sound. Our repair-cost guide shows published ranges.
Why is my dryer running but not heating?
On an electric dryer the usual suspects are the heating element, a blown thermal fuse, a failed thermostat or a tripped breaker on one leg of the circuit. On a gas dryer, check that the gas is on, then the igniter and valve coils. A blocked vent can trip the safety fuse on both types, so it should be cleared first.
Why do my clothes come out damp?
Restricted airflow is the most common cause: a full lint screen, a crushed or kinked duct, or a clogged exhaust hood outside. Overloading and a dirty moisture sensor are next. If the vent is clear and the dryer still runs long, a technician can test the heating parts.

Related Repair Pages for Howard

Amana Dryer Repair Near Howard

Write down any error code your Amana dryer shows and when it appears. It helps a Howard technician bring the right parts.

One call to a Amana dryer technician near you
☎(888) 772-9805
☎ Call (888) 772-9805 Talk to a tech