A Electrolux dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. The Ennis list starts with companies that name Electrolux, followed by other appliance repair companies that list dryer work.
Washer and Dryer Repair is independent and not affiliated with Electrolux. Listed companies are independent technicians who repair Electrolux dryers and other brands.
Electrolux Dryer Repair Near Ennis
Our data shows 30 appliance repair companies inside a 30-mile radius of Ennis. 1 of them are based in Ennis itself, and other nearby bases include Dallas (8), Midlothian (3), and Cedar Hill (3). Nearest on the list: Billingsley Appliance Service, around 0.6 miles out. No company within 90 miles of Ennis mentions Electrolux by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 25 rated companies in range average 4.3 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| With 4.5+ stars and at least 10 reviews | 12 |
|---|---|
| List dryer or washer & dryer work | 4 |
| Distance to the three closest (mi) | 0.6, 6.2, 13.3 |
| Appliance repair companies in range (30 mi) | 30 |
| Mention Electrolux | 0 |
| Open on Saturdays (per listing) | 20 |
Closest matches for Ennis: Mr. Appliance of Mansfield (19.6 miles away, based in Midlothian, 4.6 stars from 532 reviews, lists Saturday hours); Sears Appliance Repair (13.3 miles away, based in Waxahachie, 4.6 stars from 213 reviews, lists Saturday hours); Reed's Appliance Repairs (19.8 miles away, based in Red Oak, 4.7 stars from 115 reviews); Best Thermador repair service (26.5 miles away, based in Dallas, 4.8 stars from 18 reviews, lists Saturday hours).
Electrolux Dryer Lines and Features
How Electrolux Dryers Are Built
An electric Electrolux dryer is fed by two house circuits, so if one breaker trips or fuse blows the drum still turns but the heater does not work. Source: Electrolux - My dryer is running, but does not seem to be heating. What should I do?
Common Electrolux Dryer Problems
- Dryer stops mid-cycle. Electrolux says an overloaded drum can overheat the motor, so let it cool about 30 minutes and dry a smaller load filling a third to half of the drum. Source: Electrolux - What should I do if my dryer stops operating?
- Clothes over-dried. Electrolux recommends choosing the right cycle and temperature and using Auto Dry rather than Timed Dry. Source: Electrolux - My clothes seem to be over-dried. How can I prevent this?
Electrolux Dryer Error Codes
| Code | What it means |
|---|---|
| E 4 | The humidity sensor has failed; the current cycle finishes and manual cycles still work, but service is needed if it persists. Source: Electrolux - Laundry Dryer Error Code Guide |
| E 42 | The door is open or blocked; close it fully. Source: Electrolux - Laundry Dryer Error Code Guide |
| H4 / B4 | Incorrect wiring at installation. Source: Electrolux - Laundry Dryer Error Code Guide |
Signs Your Electrolux Dryer Needs a Technician
- Drum turns but the air stays cool
- Drum will not turn even though you hear a hum
- Outside of the cabinet gets unusually hot
Inside a Dryer Repair Visit
Care Electrolux Recommends for Its Dryers
- Wipe the moisture sensor bars with rubbing alcohol to remove fabric softener sheet residue. Source: Electrolux - Dryer - Not Drying and Extended Drying Time
- Inspect and clean the entire outdoor exhaust and venting system every 18 months. Source: Electrolux - Dryers - How often do I need to clean my dryer or the lint screen/filter?
What Electrolux Dryer Repairs Cost
A Electrolux dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a Electrolux Dryer Call
- How long the vent run is and where it exits the house
- Any error code on the display
- Whether the dryer is gas or electric
Around Ennis
Most dryer calls in Ennis come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Questions to Ask a Ennis Technician
- Can you give a written estimate before ordering parts?
- How often do you repair Electrolux dryers, and do you carry common parts on the truck?
- If a part has to be ordered, how soon can you come back to finish?
Electrolux Dryer Repair FAQs: Ennis, TX
Which Ennis technicians work on Electrolux?
Do you work for Electrolux?
Is my Electrolux dryer worth repairing?
Related Repair Pages for Ennis
Electrolux Dryer Repair Near Ennis
Write down any error code your Electrolux dryer shows and when it appears. It helps a Ennis technician bring the right parts.