A Frigidaire dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. We flag companies whose listing or website mentions Frigidaire and fill in with nearby dryer repair companies so you always have options.
Washer and Dryer Repair is independent and not affiliated with Frigidaire. Listed companies are independent technicians who repair Frigidaire dryers and other brands.
Independent Frigidaire Dryer Technicians, Plainview TX
Our data shows 12 appliance repair companies inside a 60-mile radius of Plainview. 2 of them are based in Plainview itself, and other nearby bases include Lubbock (9) and Muleshoe (1). Distances run up to about 57 miles. Sears Appliance Repair is the nearest, roughly 0.5 miles from Plainview. No company within 90 miles of Plainview mentions Frigidaire by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 10 rated companies in range average 3.7 stars. Plainview is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Companies are shown by relevance and distance from Plainview. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Mention Frigidaire | 0 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 4 |
| Open on Saturdays (per listing) | 6 |
| Distance to the three closest (mi) | 0.5, 1.2, 33.9 |
| List dryer or washer & dryer work | 3 |
| Appliance repair companies in range (60 mi) | 12 |
The leading options for Plainview are Sears Appliance Repair (0.5 miles away, 4.6 stars from 72 reviews, lists Saturday hours); Sears Appliance Repair (46.5 miles away, based in Lubbock, 4.6 stars from 252 reviews, lists Saturday hours); J1Sev3n Services, LLC (56.5 miles away, based in Muleshoe, 5.0 stars from 29 reviews); Randys Appliance Repair (1.2 miles away, 4.2 stars from 5 reviews).
Frigidaire Dryer Features Technicians Work On
How Frigidaire Dryers Are Built
Frigidaire notes that a 208-volt supply instead of 240 volts can lengthen drying times. Source: Frigidaire - Dryer - Not Drying and Extended Drying Time
Frigidaire Dryer Symptoms and First Checks
- Clothes over-dried. Frigidaire recommends picking the right cycle and temperature and using Auto Dry rather than Timed Dry. Source: Frigidaire - My clothes seem to be over-dried. How can I prevent this?
- Dryer not heating. Frigidaire says to check first for a tripped breaker or blown fuse on the dryer circuit, then confirm the cycle isn't Air Fluff and, on gas models, that the gas valve is open and supply is on. Source: Frigidaire - My dryer is running, but does not seem to be heating. What should I do?
Frigidaire Dryer Problems Worth a Service Call
- Burning or hot smell during a cycle
- Squealing, thumping or grinding while it runs
- Cycles take two or three runs to finish
What a Dryer Repair Technician Checks
Keeping a Frigidaire Dryer Running
- On gas models, leave space around the dryer and keep laundry or rugs from piling against the front or back so the burner gets enough air. Source: Frigidaire - My dryer is running, but does not seem to be heating. What should I do?
- Clean the lint screen before or after every load and occasionally wash it in warm, soapy water, letting it dry fully before reinstalling. Source: Frigidaire - Dryers - How often do I need to clean my dryer or the lint screen/filter?
What Frigidaire Dryer Repairs Cost
Price the repair before replacing a Frigidaire dryer. Published ranges for common jobs:
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- Any error code on the display
- How long the vent run is and where it exits the house
- What happens when you press Start (no response, hum, runs with no heat, stops early)
What Plainview Owners Should Know
Most dryer calls in Plainview come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, §1301.053 (Texas State Board of Plumbing Examiners)
Gas piping counts as plumbing in Texas and requires a plumbing license, with an exemption for LP gas installers who hold a separate state LP gas license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, §§1301.002, 1301.055 (Texas State Board of Plumbing Examiners)
Questions to Ask a Plainview Technician
- Can you give a written estimate before ordering parts?
- Is your company licensed where my state requires it, and insured?
- What is the service call or diagnostic fee, and is it applied to the repair?
Frigidaire Dryer Repair FAQs: Plainview, TX
Which Plainview technicians work on Frigidaire?
What makes a dryer stop heating?
Is this Frigidaire customer service?
Is my Frigidaire dryer worth repairing?
More Laundry Repair in Plainview, TX
More Frigidaire Dryer Repair Pages Nearby
Write down any error code your Frigidaire dryer shows and when it appears. It helps a Plainview technician bring the right parts.