Most Frigidaire dryer repairs in Edmonds involve the same few systems: heat, airflow, the drum drive and the controls. Below are independent repair companies serving Edmonds, with those that mention Frigidaire first, then the nearest dryer repair companies.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by Frigidaire. If your dryer is still under manufacturer coverage, contact Frigidaire directly.
Independent Frigidaire Dryer Technicians, Edmonds WA
40 repair companies serve Edmonds from within 30 miles. 5 list an address in Edmonds, and other nearby bases include Lynnwood (7), Bothell (7), and Seattle (5). The farthest listed company is about 8 miles out. Nearest on the list: Appliance Repair MM, around 0.7 miles out. None of the repair companies near Edmonds name Frigidaire in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. Rated companies nearby average 4.8 stars across 32 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Three nearest companies, miles away | 0.7, 1.1, 1.5 |
|---|---|
| Mention Frigidaire | 0 |
| Rated 4.5 stars or higher (10+ reviews) | 25 |
| Companies within 30 miles | 60 |
| Open on Saturdays (per listing) | 43 |
| Show laundry appliance work | 15 |
First up for Edmonds: Ace Appliance Service (6.6 miles away, based in Everett, 5.0 stars from 322 reviews); Sears Appliance Repair (4.1 miles away, based in Lynnwood, 4.7 stars from 413 reviews); Fast Appliances Repair (3.8 miles away, 4.9 stars from 116 reviews, lists Saturday hours); HotWire Furnace, Air Conditioning & Appliance Repair Bothell (4.9 miles away, based in Bothell, 4.9 stars from 1,493 reviews, lists Saturday hours).
Frigidaire Dryer Features Technicians Work On
What Makes Frigidaire Dryer Repairs Different
Electric models have a thermal limiter safety switch that cuts the motor when the dryer overheats, and it must be replaced by a service technician once tripped. Source: Frigidaire - What should I do if my dryer stops operating?
Frigidaire notes that a 208-volt supply instead of 240 volts can lengthen drying times. Source: Frigidaire - Dryer - Not Drying and Extended Drying Time
What Frigidaire Says to Check First
- Clothes take too long to dry. Frigidaire points to a dirty lint screen, a clogged exhaust duct, residue on the moisture sensor bars, poor ventilation in a closet install, or a 208-volt supply. Source: Frigidaire - Dryer - Not Drying and Extended Drying Time
- Clothes over-dried. Frigidaire recommends picking the right cycle and temperature and using Auto Dry rather than Timed Dry. Source: Frigidaire - My clothes seem to be over-dried. How can I prevent this?
Frigidaire Dryer Problems Worth a Service Call
- Burning or hot smell during a cycle
- Dryer shuts off a few minutes into the cycle
- Clothes still damp after a full cycle
What a Dryer Repair Technician Checks
Keeping a Frigidaire Dryer Running
- Wipe the moisture sensor bars with rubbing alcohol to remove dryer-sheet residue. Source: Frigidaire - Dryer - Not Drying and Extended Drying Time
- Clean the lint screen before or after every load and occasionally wash it in warm, soapy water, letting it dry fully before reinstalling. Source: Frigidaire - Dryers - How often do I need to clean my dryer or the lint screen/filter?
Frigidaire Dryer Repair Cost Ranges
A Frigidaire dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a Frigidaire Dryer Call
- Any error code on the display
- The brand, model and serial number from the label inside the door or on the back panel
- What happens when you press Start (no response, hum, runs with no heat, stops early)
Local Notes for Edmonds
Most dryer calls in Edmonds come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Washington's Department of Labor & Industries issues an appliance repair (07D) specialty electrician certificate that covers like-for-like repair and replacement of self-contained appliances such as ovens on an unchanged circuit, but excludes branch-circuit wiring and plumbing work. Source: WAC 296-46B-920, Electrical/telecommunications license/certificate types and scope of work
Washington's state plumber certification law defines plumbing as potable water, waste, medical gas and similar systems and does not list fuel gas piping, so gas line work is not part of the state plumber certificate. Source: Chapter 18.106 RCW, Plumbers
Questions to Ask a Edmonds Technician
- Will you check the vent and lint path as part of the visit?
- If a part has to be ordered, how soon can you come back to finish?
- Can you look at the washer on the same visit if it is acting up too?
Frigidaire Dryer Repair FAQs: Edmonds, WA
What should I do about a Frigidaire error code?
Should I repair or replace my Frigidaire dryer?
Is this Frigidaire customer service?
Why is my dryer running but not heating?
Related Repair Pages for Edmonds
More Frigidaire Dryer Repair Pages Nearby
Write down any error code your Frigidaire dryer shows and when it appears. It helps a Edmonds technician bring the right parts.