Serving Brookings, Oregon and nearby areas Helpline · (888) 772-9805
☎(888) 772-9805Call

Gas & Electric Dryer Repair in Brookings, OR

Whether your dryer runs on natural gas, propane or a 240-volt circuit, these are the technicians who serve Brookings.

Dryer runs but no heat in Brookings?
Call our helpline to be connected with a technician who repairs gas and electric dryers.
☎(888) 772-9805
✓5 companies listed for Brookings✓Independent, not a manufacturer✓Public ratings & distances

The fastest way to narrow down a dryer that will not heat is to know how it heats: a gas burner with an igniter and valve, or an electric element on a 240-volt circuit. Below are independent repair companies within reach of Brookings, with those that list gas appliance or dryer work shown first.

Dryer Technicians for Gas and Electric Models, Brookings

Within 60 miles of Brookings there are 5 appliance repair companies in our data. 1 list an address in Brookings, and the rest are spread across Grants Pass (3) and Smith River (1). The closest is Service center, about 1.8 miles away. 1 lists gas appliance or dryer work specifically. The 5 rated companies in range average 4.7 stars. Because the nearest shops are farther out, ask each company whether Brookings is inside its regular service area.

Washer & Dryer Repair
Sears Appliance Repair
1533 NE F St, Grants Pass, OR 97526
56.6 mi from Brookings
★★★★ 4.2 (125 reviews)
DryersWashersSaturday hours
Appliance Repair
Service center
203lilac ln, Brookings, OR 97415
1.8 mi from Brookings
★★★★½ 4.7 (12 reviews)
Appliance Repair
Appliance Repair Dynamics
302 N Fred Haight Dr, Smith River, CA 95567
12.6 mi from Brookings
★★★★½ 4.7 (11 reviews)
Appliance Repair
Immortal Appliance Repair
224 Gordon Way S, Grants Pass, OR 97527
58.3 mi from Brookings
★★★★★ 5.0 (36 reviews)
Saturday hours
Appliance Repair
Just-in Time Appliance Repair LLC
1550 Rogue River Hwy, Grants Pass, OR 97527
56.3 mi from Brookings
★★★★½ 4.7 (346 reviews)

Companies are shown by relevance and distance from Brookings. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.

Brookings repair companies in numbers
Repair companies inside 60 miles5
List dryer or washer & dryer work1
Mention gas appliance work0
Distance to the three closest (mi)1.8, 12.6, 56.3
Rated 4.5 stars or higher (10+ reviews)4
Open on Saturdays (per listing)2

At the top of the Brookings list: Sears Appliance Repair (56.6 miles away, based in Grants Pass, 4.2 stars from 125 reviews, lists Saturday hours); Service center (1.8 miles away, 4.7 stars from 12 reviews); Appliance Repair Dynamics (12.6 miles away, based in Smith River, 4.7 stars from 11 reviews); Immortal Appliance Repair (58.3 miles away, based in Grants Pass, 5.0 stars from 36 reviews, lists Saturday hours).

⚡ Get connected with a gas or electric dryer technician near Brookings
☎(888) 772-9805

How Gas and Electric Dryers Differ

How an electric dryer heatsAn electric dryer runs current through a coiled heating element, protected by a thermal fuse and cycling and high-limit thermostats. It needs both legs of a 240-volt circuit to heat.
What they shareBoth types use the same drum, belt, rollers, motor and blower, and both depend on a clear vent. Many no-heat calls on either type start and end with the vent.

Angi notes electric dryers are easier to fix with simple parts like belts, switches and heaters, while gas dryer work calls for a gas appliance repair professional. Source: Angi - Gas vs. Electric Dryers

What a Technician Checks on a Gas Dryer

Airflow and the ventA long dry time is most often an airflow problem. A technician checks the lint screen housing, the duct behind the dryer and the exhaust hood outside before replacing any heating parts, because a restricted vent can make a healthy dryer look broken.
Drum belt, rollers and idler pulleySqueals, thumps and a drum that will not turn trace back to the belt, the drum support rollers, the idler pulley or the drum glides. These are wear parts and are often replaced together.

No Heat on an Electric Dryer

Door switch and start circuitA dryer that does nothing when Start is pressed may have a failed door switch, start switch, fuse or control board. Checking power at the outlet comes first, since an electric dryer needs both legs of a 240-volt circuit to heat.
Moisture sensor and controlsSensor-dry cycles stop when two metal strips inside the drum read dry clothes. Fabric-softener film on those strips can end cycles early or let them run long, and a technician checks them before blaming the control board.

Gas Safety Around the Dryer

Have a professional inspect a gas dryer's gas line and connection for leaks and damage. Source: NFPA (via U.S. Department of Energy) - Clothes Dryer & Washing Machine Safety

If you smell gas strongly or are unsure, leave the building and call the gas company or 911 once you are outside; do not use light switches, appliance controls, phones near the odor, or anything that could spark. Source: Connecticut Public Utilities Regulatory Authority - What To Do If You Smell Natural Gas

More: gas dryer not heating and dryer not heating.

Dryer Heating Repair Cost Ranges

Gas and electric dryers have different heat-source parts but similar labor. Published ranges for common repairs:

Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?

Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.

What Brookings Owners Should Know

Most dryer calls in Brookings come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.

Businesses that install, alter or repair LP gas appliances, piping or vent connections need an LP gas installation license, and the individuals doing the work need a fitter license, both from the Oregon State Fire Marshal; natural gas licensing was not confirmed. Source: Liquefied Petroleum Gas licensing (Oregon State Fire Marshal)

In Oregon, you can check a license with the Oregon Construction Contractors Board Contractor/License Search or report a problem to the Oregon Department of Justice, Consumer Protection.

How to Choose a Dryer Technician Near Brookings

  • How often do you repair your brand dryers, and do you carry common parts on the truck?
  • What guarantee do you give on parts and labor?
  • Can you look at the washer on the same visit if it is acting up too?

Gas & Electric Dryer Repair FAQs: Brookings, OR

Can a gas dryer be repaired by any technician?
Many appliance repair companies service gas dryers, including igniters, valve coils and burners. Work on the gas supply line itself may require a licensed gas or plumbing contractor depending on your state.
How do I know if my dryer is gas or electric?
A gas dryer has a gas pipe and shutoff valve behind it and plugs into a regular household outlet. An electric dryer plugs into a large 240-volt outlet and has no gas line. The rating label inside the door also says which it is.
Is a gas smell from the dryer an emergency?
Yes. Do not operate switches or the dryer. Leave the house and call your gas utility or 911 from outside, and only call a repair company after the utility says it is safe.

Related Repair Pages for Brookings

Gas & Electric Dryer Repair Near Brookings

Before a technician visits, confirm the gas shutoff behind the dryer is open (or the breaker is on for an electric model) and clean the lint screen. If you smell gas, leave first and call your gas utility.

Tell us the fuel type and the symptom and we will connect you
☎(888) 772-9805
☎ Call (888) 772-9805 Talk to a tech