GE owners in San Tan Valley usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving San Tan Valley, with those that mention GE first, then the nearest dryer repair companies.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
GE Dryer Repair Near San Tan Valley
40 repair companies serve San Tan Valley from within 30 miles. 2 of them are based in San Tan Valley itself, and other nearby bases include Gilbert (15), Mesa (7), and Chandler (7). Distances run up to about 20 miles. None of the repair companies near San Tan Valley name GE in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. The closest is AABCO Service Appliance Repair, about 2.9 miles away. The 32 rated companies in range average 4.8 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Distance to the three closest (mi) | 2.9, 4.3, 5.2 |
|---|---|
| Listing Saturday hours | 42 |
| Show laundry appliance work | 14 |
| Repair companies inside 30 miles | 60 |
| Mention GE | 0 |
| Rated 4.5 stars or higher (10+ reviews) | 22 |
At the top of the San Tan Valley list: Steve's Appliance Repair (8.8 miles away, based in Queen Creek, 4.9 stars from 82 reviews); Appliance Care & Repair (18.4 miles away, based in Mesa, 4.9 stars from 115 reviews, lists Saturday hours); Sears Appliance Repair (15.4 miles away, based in Chandler, 4.4 stars from 300 reviews, lists Saturday hours); ROCK SOLID APPLIANCE REPAIR (5.2 miles away, based in Queen Creek, 5.0 stars from 53 reviews, lists Saturday hours).
GE Dryer Features Technicians Work On
How GE Dryers Are Built
Some GE dryers have an airflow sensor that shows a Check Vent alert when exhaust airflow drops, which usually means the vent is blocked. Source: GE Appliances - Dryer - Check Vent Sensor Alert
GE allows only rigid or flexible metal vent duct and says plastic flexible duct is not acceptable because it collapses, cuts airflow and can collect water. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
What GE Says to Check First
- Gas dryer runs but does not heat. GE says to confirm a real drying cycle and temperature are selected, keep the front of the dryer unblocked, check the dedicated 120V outlet, and on new installs make sure the gas line is turned on. Source: GE Appliances - Gas Dryer - Runs But Does Not Heat
- Check Vent alert. GE says to unplug the dryer, disconnect and vacuum the duct, and make sure the outside hood damper moves freely. Source: GE Appliances - Dryer - Check Vent Sensor Alert
GE Dryer Error Codes
| Code | What it means |
|---|---|
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
GE Dryer Problems Worth a Service Call
- Clothes still damp after a full cycle
- Dryer will not start when you press Start
- Outside of the cabinet gets unusually hot
What Gets Fixed on a San Tan Valley Dryer Call
Care GE Recommends for Its Dryers
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
Brand guides: GE Dryer Not Heating: What to Check.
What GE Dryer Repairs Cost
A GE dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Typical dryer repair (most homeowners): $100–$430 Source: Angi - How Much Does Dryer Repair Cost?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a GE Dryer Call
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- Any error code on the display
- How long the vent run is and where it exits the house
What San Tan Valley Owners Should Know
Most dryer calls in San Tan Valley come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Arizona has no appliance-repair-specific license; work is regulated through Registrar of Contractors classifications, and state law removes the small-job (under $1,000) handyman exemption for any work connecting or repairing appliances on natural gas or propane. Source: A.R.S. 32-1121 - Persons not required to be licensed
The Arizona Registrar of Contractors licenses gas piping and gas appliance work under its plumbing classifications (such as C-37 and R-37), which cover piping and appliances for natural and manufactured gas. Source: License Classifications - Arizona Registrar of Contractors
Hiring a Dryer Repair Company in San Tan Valley
- Can you look at the washer on the same visit if it is acting up too?
- How often do you repair GE dryers, and do you carry common parts on the truck?
- What guarantee do you give on parts and labor?
GE Dryer Repair FAQs: San Tan Valley, AZ
Why is my dryer running but not heating?
Why does my GE dryer show an error code?
Is this GE customer service?
Other Dryer Repair in San Tan Valley
GE Dryer Repair in Nearby Cities
Before you call, find the model and serial number on your GE dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.