Serving San Bruno, California and nearby areas Helpline · (888) 772-9805
☎(888) 772-9805Call

GE Dryer Repair in San Bruno, CA

See which technicians around San Bruno, CA mention GE, how far away they are and how customers rate them.

Need GE dryer repair near San Bruno?
One call reaches an independent technician near San Bruno who works on GE.
☎(888) 772-9805
✓10 companies listed for San Bruno✓Independent, not a manufacturer✓Public ratings & distances

Most GE dryer repairs in San Bruno involve the same few systems: heat, airflow, the drum drive and the controls. Below are independent repair companies serving San Bruno, with those that mention GE first, then the nearest dryer repair companies.

This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.

Independent GE Dryer Technicians, San Bruno CA

We found 40 appliance repair companies within 30 miles of San Bruno. 5 of them are based in San Bruno itself, and the rest are spread across Burlingame (12), South San Francisco (8), and Daly City (8). The farthest listed company is about 6 miles out. Nearest on the list: Smart Appliances Corp., around 0.4 miles out. None of the repair companies near San Bruno name GE in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. Rated companies nearby average 4.6 stars across 35 businesses.

Washer & Dryer Repair
UsProRepair
271 Aviador Ave, Millbrae, CA 94030
2.8 mi from San Bruno
★★★★★ 5.0 (110 reviews)
DryersWashersSaturday hours
Washer & Dryer Repair
Appliance Repair
533 Airport Blvd. #478, Burlingame, CA 94010
5.5 mi from San Bruno
★★★★½ 4.7 (141 reviews)
DryersWashers
Washer & Dryer Repair
Triton Appliance repair
1 Crown Cir, South San Francisco, CA 94080
2.9 mi from San Bruno
★★★★★ 4.8 (308 reviews)
DryersWashersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
1178 El Camino Real, San Bruno, CA 94066
1.1 mi from San Bruno
★★★★½ 4.4 (340 reviews)
DryersWashersSaturday hours
Appliance Repair
Quality Appliance Repair San Francisco LLC
1106 El Camino Real #10, Burlingame, CA 94010
4.7 mi from San Bruno
★★★★★ 4.9 (469 reviews)
Saturday hours
Washer & Dryer Repair
Master Appliance Repair
2450 Ardee Ln, South San Francisco, CA 94080
1.9 mi from San Bruno
★★★★★ 4.9 (49 reviews)
DryersWashersSaturday hours
Washer & Dryer Repair
Ryan's laundry repair
820 Linden Ave, Burlingame, CA 94010
5.1 mi from San Bruno
★★★★★ 5.0 (6 reviews)
DryersWashersSaturday hours
Washer & Dryer Repair
Bay Appliance Repair
140 San Pedro Rd, Daly City, CA 94014
4.8 mi from San Bruno
★½ 1.7 (13 reviews)
DryersWashers
Washer & Dryer Repair
Plug-in Appliance Repair
1450 Chapin Ave Ste 100, Burlingame, CA 94010
5.4 mi from San Bruno
★★★★★ 5.0 (5 reviews)
DryersWashersSaturday hours
Appliance Repair
Powerstream Appliance Repair
789 El Camino Real #21, Burlingame, CA 94010
5.1 mi from San Bruno
★★★★★ 4.9 (157 reviews)
Saturday hours

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

San Bruno repair companies in numbers
Show laundry appliance work11
Three nearest companies, miles away0.4, 0.5, 1.1
Companies within 30 miles60
Mention GE0
Rated 4.5 stars or higher (10+ reviews)15
Listing Saturday hours47

Closest matches for San Bruno: UsProRepair (2.8 miles away, based in Millbrae, 5.0 stars from 110 reviews, lists Saturday hours); Appliance Repair (5.5 miles away, based in Burlingame, 4.7 stars from 141 reviews); Triton Appliance repair (2.9 miles away, based in South San Francisco, 4.8 stars from 308 reviews, lists Saturday hours); Sears Appliance Repair (1.1 miles away, 4.4 stars from 340 reviews, lists Saturday hours).

⚡ Get connected with a GE dryer technician near San Bruno
☎(888) 772-9805

Know Your GE Dryer

GE Profile UltraFast ComboAn all-in-one washer/dryer that dries with ventless inverter heat pump technology, so it needs no outside vent and runs on a 120V plug.
GE / GE Profile aluminized alloy drum dryers with Sensor DryTop-load-pair electric dryers with an aluminized alloy drum, a sanitize cycle and moisture-sensing Sensor Dry.

How GE Dryers Are Built

Sensor dry models must sit level so tumbling clothes contact the moisture sensors; an unlevel dryer can end cycles with clothes still damp. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All

An electric GE dryer receiving only partial (120V) power from its 240V circuit can tumble normally but produce no heat, and a dryer wired to a 120V circuit can take up to three times longer to dry. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat

What GE Says to Check First

GE Dryer Error Codes

CodeWhat it means
353 (UltraFast Combo)The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages
Confirm H2O Supply is ON (UltraFast Combo)No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages
18 (UltraFast Combo)The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages

When to Call for GE Dryer Repair

  • Clothes still damp after a full cycle
  • Drum will not turn even though you hear a hum
  • Dryer shuts off a few minutes into the cycle

What Gets Fixed on a San Bruno Dryer Call

Airflow and the ventA long dry time is most often an airflow problem. A technician checks the lint screen housing, the duct behind the dryer and the exhaust hood outside before replacing any heating parts, because a restricted vent can make a healthy dryer look broken.
Heating elementElectric dryers heat with a coiled element. If the drum turns but the air stays cool, the element is checked for continuity along with the thermostats and fuses that feed it.

Owner Care for GE Dryers

Brand guides: GE Dryer Not Heating: What to Check.

What GE Dryer Repairs Cost

Most GE dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:

A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?

Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.

Before the Technician Arrives

  • How long the vent run is and where it exits the house
  • Any error code on the display
  • Whether the dryer is gas or electric

What San Bruno Owners Should Know

Most dryer calls in San Bruno come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.

California requires businesses that repair major home appliances such as refrigerators, ranges, dishwashers, washers and dryers for pay to register with the Bureau of Household Goods and Services as Major Home Appliance Service Dealers, including out-of-state providers serving California customers. Source: Application for Registration (Electronic and Appliance Repair Dealers) - Bureau of Household Goods and Services

In California, you can check a license with the CSLB Check a License or report a problem to the California Attorney General, Public Inquiry Unit (consumer complaint against a business).

Hiring a Dryer Repair Company in San Bruno

  • Can you look at the washer on the same visit if it is acting up too?
  • How often do you repair GE dryers, and do you carry common parts on the truck?
  • Do you work on gas dryers, and who handles anything involving the gas line?

GE Dryer Repair FAQs: San Bruno, CA

Is this GE customer service?
No. We are an independent directory and are not affiliated with GE. The companies listed are independent technicians. For manufacturer coverage questions, contact GE directly.
Why does my dryer take so long to dry?
Restricted airflow is the most common cause: a full lint screen, a crushed or kinked duct, or a clogged exhaust hood outside. Overloading and a dirty moisture sensor are next. If the vent is clear and the dryer still runs long, a technician can test the heating parts.
What should I do about a GE error code?
Write the code down, check the brand's guidance for it and clear simple causes such as a blocked vent. If the code returns, a technician can test the part the code points to.

Other Dryer Repair in San Bruno

GE Dryer Repair Near San Bruno

Write down any error code your GE dryer shows and when it appears. It helps a San Bruno technician bring the right parts.

One call to a GE dryer technician near you
☎(888) 772-9805
☎ Call (888) 772-9805 Talk to a tech