A GE dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. The Oakbrook list starts with companies that name GE, followed by other appliance repair companies that list dryer work.
Washer and Dryer Repair is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dryers and other brands.
Independent GE Dryer Technicians, Oakbrook KY
Within 30 miles of Oakbrook there are 40 appliance repair companies in our data. The rest are spread across Cincinnati (26), Covington (4), and Florence (3). No company within 30 miles of Oakbrook names GE in its listing, so the list adds matches from farther out and the closest appliance repair companies. The closest is Sears Appliance Repair, about 1.6 miles away. Across 32 rated companies, the average public rating is 4.4 stars.
Companies are shown by relevance and distance from Oakbrook. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Distance to the three closest (mi) | 1.6, 1.9, 2.9 |
|---|---|
| Open on Saturdays (per listing) | 29 |
| Companies within 30 miles | 60 |
| Mention GE | 0 |
| List dryer or washer & dryer work | 12 |
| Rated 4.5 stars or higher (10+ reviews) | 15 |
Closest matches for Oakbrook: Sears Appliance Repair (65.8 miles away, based in Versailles, 4.6 stars from 52 reviews, lists Saturday hours); General Electric Co (71.5 miles away, based in Jeffersonville, 4.0 stars from 38 reviews); Niceley’s Appliance Repair Inc. (4.2 miles away, based in Erlanger, 4.8 stars from 2,056 reviews, lists Saturday hours); A-1 Appliance Service Co (18.4 miles away, based in Cincinnati, 4.8 stars from 1,034 reviews).
GE Dryer Lines and Features
What a GE Dryer Technician Deals With
Sensor dry models must sit level so tumbling clothes contact the moisture sensors; an unlevel dryer can end cycles with clothes still damp. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
What GE Says to Check First
- Check Vent alert. GE says to unplug the dryer, disconnect and vacuum the duct, and make sure the outside hood damper moves freely. Source: GE Appliances - Dryer - Check Vent Sensor Alert
- Dryer hot to the touch or sweating. GE says this usually means heat and humidity cannot escape, so clean the exhaust duct, clear the wall cap and confirm the elbow count suits the vent length. Source: GE Appliances - Dryer - Hot to the Touch or Sweats
GE Dryer Error Codes
| Code | What it means |
|---|---|
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
Signs Your GE Dryer Needs a Technician
- Clothes still damp after a full cycle
- Squealing, thumping or grinding while it runs
- Burning or hot smell during a cycle
Inside a Dryer Repair Visit
Owner Care for GE Dryers
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
Brand guides: GE Dryer Not Heating: What to Check.
What GE Dryer Repairs Cost
A GE dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Typical dryer repair (most homeowners): $100–$430 Source: Angi - How Much Does Dryer Repair Cost?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- How long the vent run is and where it exits the house
- Whether the dryer is gas or electric
- The brand, model and serial number from the label inside the door or on the back panel
Dryer Notes for Oakbrook, KY
Most dryer calls in Oakbrook come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Kentucky has no license category for appliance repair as such; the Department of Housing, Buildings and Construction licenses trades such as HVAC (whose scope covers installing and repairing heating, burner and cooling systems), plumbing and electrical. Source: KRS 198B.650 Definitions (Kentucky Legislative Research Commission)
In Kentucky, you can check a license with the Department of Housing, Buildings and Construction License Search and Verification or report a problem to the Kentucky Attorney General, Office of Consumer Protection.
Hiring a Dryer Repair Company in Oakbrook
- Can you look at the washer on the same visit if it is acting up too?
- Can you give a written estimate before ordering parts?
- What is the service call or diagnostic fee, and is it applied to the repair?
GE Dryer Repair FAQs: Oakbrook, KY
Why do my clothes come out damp?
What makes a dryer stop heating?
Do you work for GE?
What should I do about a GE error code?
More Laundry Repair in Oakbrook, KY
GE Dryer Repair Near Oakbrook
Before you call, find the model and serial number on your GE dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.