GE owners in Carson City usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving Carson City, with those that mention GE first, then the nearest dryer repair companies.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
GE Dryer Repair Near Carson City
Our data shows 31 appliance repair companies inside a 30-mile radius of Carson City. 5 list an address in Carson City, and the rest are spread across Reno (13), Sparks (5), and Gardnerville (4). The farthest listed company is about 30 miles out. Sam's Furniture & Appliance is the nearest, roughly 0.2 miles from Carson City. 1 lists GE specifically. The 24 rated companies in range average 4.4 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| With 4.5+ stars and at least 10 reviews | 13 |
|---|---|
| Companies within 30 miles | 31 |
| Mention GE | 1 |
| List dryer or washer & dryer work | 11 |
| Distance to the three closest (mi) | 0.2, 1.5, 2.6 |
| Open on Saturdays (per listing) | 21 |
At the top of the Carson City list: Sears Appliance Repair (21.7 miles away, based in South Lake Tahoe, 4.5 stars from 60 reviews, lists Saturday hours); Northern Nevada Appliance Outlet (1.5 miles away, 4.5 stars from 292 reviews, lists Saturday hours); Sears Appliance Repair (3.3 miles away, 4.5 stars from 89 reviews, lists Saturday hours); Mr. Appliance of Reno (25.3 miles away, based in Reno, 4.8 stars from 925 reviews, lists Saturday hours).
GE Dryer Features Technicians Work On
What Makes GE Dryer Repairs Different
The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
What GE Says to Check First
- Gas dryer runs but does not heat. GE says to confirm a real drying cycle and temperature are selected, keep the front of the dryer unblocked, check the dedicated 120V outlet, and on new installs make sure the gas line is turned on. Source: GE Appliances - Gas Dryer - Runs But Does Not Heat
- Dryer hot to the touch or sweating. GE says this usually means heat and humidity cannot escape, so clean the exhaust duct, clear the wall cap and confirm the elbow count suits the vent length. Source: GE Appliances - Dryer - Hot to the Touch or Sweats
Reading a GE Dryer Error Code
| Code | What it means |
|---|---|
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
When to Call for GE Dryer Repair
- Drum turns but the air stays cool
- Cycles take two or three runs to finish
- Clothes still damp after a full cycle
How a Dryer Service Call Usually Goes in Carson City
Keeping a GE Dryer Running
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
Brand guides: GE Dryer Not Heating: What to Check.
What GE Dryer Repairs Cost
Most GE dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- How long the vent run is and where it exits the house
- Any error code on the display
- The brand, model and serial number from the label inside the door or on the back panel
Around Carson City
Most dryer calls in Carson City come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Nevada has no license class for appliance repair as such; contracting work on gas piping, gas vents and water heaters falls under the State Contractors Board's C-1 plumbing and heating subclassifications. Source: Nevada Administrative Code Chapter 624 (NAC 624.190)
Installing gas supply piping and vents requires a Nevada State Contractors Board license in the C-1 plumbing and heating classification (for example the C-1d plumbing or C-1g gas pipes and vents subclassifications), and water heater installation and repair falls under subclassification C-1h. Source: Nevada Administrative Code Chapter 624 (NAC 624.190)
Hiring a Dryer Repair Company in Carson City
- Can you look at the washer on the same visit if it is acting up too?
- Do you work on gas dryers, and who handles anything involving the gas line?
- How often do you repair GE dryers, and do you carry common parts on the truck?
GE Dryer Repair FAQs: Carson City, NV
Why do my clothes come out damp?
Which Carson City technicians work on GE?
What makes a dryer stop heating?
More Laundry Repair in Carson City, NV
More GE Dryer Repair Pages Nearby
Before you call, find the model and serial number on your GE dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.