Most GE dryer repairs in Mount Vernon involve the same few systems: heat, airflow, the drum drive and the controls. The Mount Vernon list starts with companies that name GE, followed by other appliance repair companies that list dryer work.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by GE. If your dryer is still under manufacturer coverage, contact GE directly.
GE Dryer Repair Near Mount Vernon
19 repair companies serve Mount Vernon from within 30 miles. Other nearby bases include Mansfield (5), Newark (4), and Pataskala (3). Distances run up to about 29 miles. No company within 30 miles of Mount Vernon names GE in its listing, so the list adds matches from farther out and the closest appliance repair companies. Nearest on the list: Herald's Appliances, around 0.8 miles out. The 19 rated companies in range average 4.3 stars.
Companies are shown by relevance and distance from Mount Vernon. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Repair companies inside 30 miles | 19 |
|---|---|
| Three nearest companies, miles away | 0.8, 1.5, 8.9 |
| Mention GE | 0 |
| Listing Saturday hours | 8 |
| Rated 4.5 stars or higher (10+ reviews) | 11 |
| Show laundry appliance work | 2 |
First up for Mount Vernon: Sears Appliance Repair (32.6 miles away, based in Coshocton, 4.5 stars from 28 reviews, lists Saturday hours); Mr. Appliance of Ashland and Mansfield (25.7 miles away, based in Mansfield, 4.7 stars from 879 reviews, lists Saturday hours); Senitt's Appliance Service (1.5 miles away, based in Mt Vernon, 4.7 stars from 116 reviews); Herald's Appliances (0.8 miles away, based in Mt Vernon, 4.7 stars from 105 reviews, lists Saturday hours).
GE Dryer Lines and Features
How GE Dryers Are Built
Some GE dryers have an airflow sensor that shows a Check Vent alert when exhaust airflow drops, which usually means the vent is blocked. Source: GE Appliances - Dryer - Check Vent Sensor Alert
What GE Says to Check First
- Electric dryer runs but does not heat. GE says to confirm the dryer has a dedicated 240V supply, reset the breaker fully off and on, and then inspect the power cord and terminal block for burned or loose connections. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat
- Dryer takes too long to dry. GE points first to venting (metal duct, no kinks, clear wall cap) and a clean lint filter, then to load size, dryer level and washer spin speed. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
GE Dryer Error Codes
| Code | What it means |
|---|---|
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
GE Dryer Problems Worth a Service Call
- Squealing, thumping or grinding while it runs
- Clothes still damp after a full cycle
- Dryer shuts off a few minutes into the cycle
How a Dryer Service Call Usually Goes in Mount Vernon
Owner Care for GE Dryers
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
- Inspect and clean the exhaust duct at least once a year by unplugging the dryer, disconnecting the duct and vacuuming it, and check that the outside hood flaps move freely with no nests inside. Source: GE Appliances - Dryer - How to Clean Exhaust / Vent Duct
Brand guides: GE Dryer Not Heating: What to Check.
Budgeting for a GE Dryer Repair
Price the repair before replacing a GE dryer. Published ranges for common jobs:
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a GE Dryer Call
- The brand, model and serial number from the label inside the door or on the back panel
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- Any error code on the display
Around Mount Vernon
Most dryer calls in Mount Vernon come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Ohio has no state license for appliance repair; the Ohio Construction Industry Licensing Board licenses commercial contractors in plumbing, hydronics, refrigeration, HVAC and electrical, and residential contractor work is generally overseen locally. Source: Ohio Department of Commerce: OCILB Contractor Complaint Form
In Ohio, you can check a license with the Ohio Department of Commerce OCILB Company Licensee Lookup or report a problem to the Ohio Attorney General, Consumer Protection Section.
Questions to Ask a Mount Vernon Technician
- What is the service call or diagnostic fee, and is it applied to the repair?
- Is your company licensed where my state requires it, and insured?
- Can you look at the washer on the same visit if it is acting up too?
GE Dryer Repair FAQs: Mount Vernon, OH
How do I find a technician who knows GE dryers?
Is my GE dryer worth repairing?
What should I do about a GE error code?
What makes a dryer stop heating?
Other Dryer Repair in Mount Vernon
More GE Dryer Repair Pages Nearby
Before you call, find the model and serial number on your GE dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.