Most GE dryer repairs in Donna involve the same few systems: heat, airflow, the drum drive and the controls. The Donna list starts with companies that name GE, followed by other appliance repair companies that list dryer work.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
GE Dryer Repair Near Donna
Within 30 miles of Donna there are 40 appliance repair companies in our data. 1 of them are based in Donna itself, and other nearby bases include McAllen (25), Pharr (3), and Edinburg (3). The farthest listed company is about 18 miles out. No company within 90 miles of Donna mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is Manjarrez Appliance & hvac, about 1.4 miles away. Across 38 rated companies, the average public rating is 4.3 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| List dryer or washer & dryer work | 6 |
|---|---|
| Three nearest companies, miles away | 1.4, 4.0, 4.2 |
| Mention GE | 0 |
| Rated 4.5 stars or higher (10+ reviews) | 11 |
| Appliance repair companies in range (30 mi) | 50 |
| Open on Saturdays (per listing) | 30 |
First up for Donna: Sears Appliance Repair (4.2 miles away, based in Weslaco, 4.6 stars from 226 reviews, lists Saturday hours); Sears Appliance Repair (11.2 miles away, based in McAllen, 4.4 stars from 290 reviews, lists Saturday hours); Treviño Appliance - Sales, Service & Parts (8.7 miles away, based in Pharr, 4.7 stars from 232 reviews, lists Saturday hours); Treviño Appliance - Sales, Service & Parts (12.1 miles away, based in Edinburg, 4.4 stars from 104 reviews, lists Saturday hours).
GE Dryer Features Technicians Work On
What Makes GE Dryer Repairs Different
Some GE dryers have an airflow sensor that shows a Check Vent alert when exhaust airflow drops, which usually means the vent is blocked. Source: GE Appliances - Dryer - Check Vent Sensor Alert
GE Dryer Symptoms and First Checks
- Electric dryer runs but does not heat. GE says to confirm the dryer has a dedicated 240V supply, reset the breaker fully off and on, and then inspect the power cord and terminal block for burned or loose connections. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat
- Gas dryer runs but does not heat. GE says to confirm a real drying cycle and temperature are selected, keep the front of the dryer unblocked, check the dedicated 120V outlet, and on new installs make sure the gas line is turned on. Source: GE Appliances - Gas Dryer - Runs But Does Not Heat
GE Dryer Error Codes
| Code | What it means |
|---|---|
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
When to Call for GE Dryer Repair
- Drum turns but the air stays cool
- Clothes still damp after a full cycle
- Drum will not turn even though you hear a hum
How a Dryer Service Call Usually Goes in Donna
Keeping a GE Dryer Running
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
Brand guides: GE Dryer Not Heating: What to Check.
What GE Dryer Repairs Cost
Price the repair before replacing a GE dryer. Published ranges for common jobs:
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a GE Dryer Call
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- How long the vent run is and where it exits the house
- Any error code on the display
Around Donna
Most dryer calls in Donna come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, §1301.053 (Texas State Board of Plumbing Examiners)
Gas piping counts as plumbing in Texas and requires a plumbing license, with an exemption for LP gas installers who hold a separate state LP gas license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, §§1301.002, 1301.055 (Texas State Board of Plumbing Examiners)
Before You Book in Donna
- What is the service call or diagnostic fee, and is it applied to the repair?
- Do you work on gas dryers, and who handles anything involving the gas line?
- How often do you repair GE dryers, and do you carry common parts on the truck?
GE Dryer Repair FAQs: Donna, TX
Which Donna technicians work on GE?
Do you work for GE?
Why does my GE dryer show an error code?
More Laundry Repair in Donna, TX
More GE Dryer Repair Pages Nearby
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a GE repair.