Most Kenmore dryer repairs in Leeds involve the same few systems: heat, airflow, the drum drive and the controls. The Leeds list starts with companies that name Kenmore, followed by other appliance repair companies that list dryer work.
This is an independent directory. We are not affiliated with Kenmore, and the technicians listed are independent repair companies, not the manufacturer.
Kenmore appliances were sold through Sears for decades, so many owners look for Sears dryer repair. The companies here are independent technicians who work on Kenmore and Kenmore Elite dryers; they are not Sears.
Who Works on Kenmore Dryers Near Leeds
Our data shows 40 appliance repair companies inside a 30-mile radius of Leeds. Other nearby bases include Birmingham (28), Pell City (2), and Hoover (2). The farthest listed company is about 20 miles out. No company within 90 miles of Leeds mentions Kenmore by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is Serenity Appliance, about 3.9 miles away. Across 25 rated companies, the average public rating is 4.3 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Distance to the three closest (mi) | 3.9, 5.8, 6.4 |
|---|---|
| Companies within 30 miles | 60 |
| List dryer or washer & dryer work | 6 |
| Open on Saturdays (per listing) | 25 |
| Mention Kenmore | 0 |
| With 4.5+ stars and at least 10 reviews | 15 |
First up for Leeds: Lewie's Appliance Sales & Service (13.3 miles away, based in Birmingham, 4.9 stars from 2,563 reviews, lists Saturday hours); Mr. Appliance Over the Mountain (6.4 miles away, based in Birmingham, 4.8 stars from 1,998 reviews, lists Saturday hours); Sears Appliance Repair (16.7 miles away, based in Pell City, 4.6 stars from 507 reviews, lists Saturday hours); OTM Appliance Repair (17.9 miles away, based in Birmingham, 4.8 stars from 457 reviews).
Kenmore Dryer Lines and Features
What a Kenmore Dryer Technician Deals With
On Kenmore Elite steam dryers, the display reports ductwork restriction in steps (d80, d90, d95) and a blinking CHECK VENT, which the guide says is an exhaust problem rather than a dryer failure. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
SmartDry Ultra dryers combine two moisture sensors with a temperature monitor and a dual heating element to fine-tune heat and cycle length. Source: Kenmore - 8.8 cu. ft. Electric Dryer w/ SmartDry Ultra Technology
Kenmore Dryer Symptoms and First Checks
- Clothes wrinkled after drying. Kenmore says to remove clothes promptly, avoid overloading, and use Wrinkle Guard or a short touch-up cycle. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer won't start. Kenmore says to confirm the cord is fully plugged into a grounded outlet and the breaker is intact, and to turn off Control Lock if buttons beep but nothing happens. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Dryer Codes Mean
| Code | What it means |
|---|---|
| d80 / d90 / d95 (Elite steam dryers) | The exhaust ductwork is roughly 80, 90 or 95 percent blocked; stop using the dryer until the vent is cleaned or repaired. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| HS (Elite steam dryers) | The humidity (moisture) sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| CHECK FILTER (Elite steam dryers) | A reminder to clean the lint filter before the load. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Signs Your Kenmore Dryer Needs a Technician
- Drum turns but the air stays cool
- Clothes still damp after a full cycle
- Burning or hot smell during a cycle
What Gets Fixed on a Leeds Dryer Call
Owner Care for Kenmore Dryers
- Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
- If the lint screen looks clogged when held to the light, scrub it with hot soapy water and a stiff brush and let it dry fully before reinstalling. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
What Kenmore Dryer Repairs Cost
Most Kenmore dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a Kenmore Dryer Call
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- How long the vent run is and where it exits the house
- Whether the dryer is gas or electric
Local Notes for Leeds
Most dryer calls in Leeds come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Alabama does not issue a separate appliance repair license, and the state's heating, air conditioning and refrigeration contractor law expressly excludes work on household appliances, residential refrigerators and ice machines. Source: Code of Alabama 1975, Section 34-31-18 et seq. (Alabama Board of Heating, Air Conditioning & Refrigeration Contractors)
Gas fitting work in Alabama requires a state gas fitter license from the Alabama Plumbers and Gas Fitters Examining Board, which tests competency before anyone performs, supervises or contracts gas fitting. Source: About the Board - Alabama Plumbers and Gas Fitters Examining Board
Before You Book in Leeds
- Is your company licensed where my state requires it, and insured?
- Will you check the vent and lint path as part of the visit?
- Can you give a written estimate before ordering parts?
Kenmore Dryer Repair FAQs: Leeds, AL
Do you work for Kenmore?
Is my Kenmore dryer worth repairing?
How do I find a technician who knows Kenmore dryers?
Other Dryer Repair in Leeds
More Kenmore Dryer Repair Pages Nearby
Write down any error code your Kenmore dryer shows and when it appears. It helps a Leeds technician bring the right parts.