Most Kenmore dryer repairs in Cherryland involve the same few systems: heat, airflow, the drum drive and the controls. The Cherryland list starts with companies that name Kenmore, followed by other appliance repair companies that list dryer work.
This is an independent directory. We are not affiliated with Kenmore, and the technicians listed are independent repair companies, not the manufacturer.
Kenmore dryers were made for Sears by several manufacturers over the years, so the model number matters more than the badge. Independent technicians can look up the parts from it.
Kenmore Dryer Repair Near Cherryland
Within 30 miles of Cherryland there are 40 appliance repair companies in our data. The rest are spread across Hayward (23), San Leandro (11), and Castro Valley (4). The closest is Jebs Appliances, about 0.6 miles away. No company within 90 miles of Cherryland mentions Kenmore by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 4.6 stars across 29 businesses.
Companies are shown by relevance and distance from Cherryland. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Companies within 30 miles | 60 |
|---|---|
| Listing Saturday hours | 41 |
| List dryer or washer & dryer work | 13 |
| With 4.5+ stars and at least 10 reviews | 15 |
| Mention Kenmore | 0 |
| Three nearest companies, miles away | 0.6, 0.9, 1.0 |
First up for Cherryland: Local Appliance Repair (2.3 miles away, based in Castro Valley, 4.8 stars from 60 reviews, lists Saturday hours); Royal Dacor Appliance Repair (1.0 miles away, based in San Leandro, 4.1 stars from 14 reviews, lists Saturday hours); Sears Appliance Repair (1.8 miles away, based in Hayward, 4.6 stars from 319 reviews, lists Saturday hours); Sears Appliance Repair (2.8 miles away, based in Hayward, 4.2 stars from 193 reviews, lists Saturday hours).
Know Your Kenmore Dryer
What a Kenmore Dryer Technician Deals With
Accela Steam dryers connect directly to the household water supply, so the inlet hose and water pressure (20 to 120 psi) become part of a steam-dryer service check. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Says to Check First
- Dryer won't start. Kenmore says to confirm the cord is fully plugged into a grounded outlet and the breaker is intact, and to turn off Control Lock if buttons beep but nothing happens. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer not heating. Kenmore says to check for a tripped breaker or blown fuse and, on gas models, confirm the gas supply is on, noting an electric dryer can tumble without heat on a partial circuit. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Reading a Kenmore Dryer Error Code
| Code | What it means |
|---|---|
| PS (Elite steam dryers) | The power cord on an electric model is wired incorrectly; check the neutral on the center terminal. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| PF / nP (Elite steam dryers) | A power supply or cord connection problem; check the cord at the terminal block and the house fuse or breaker. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| tE1-tE7 (Elite steam dryers) | A temperature sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
When to Call for Kenmore Dryer Repair
- Drum turns but the air stays cool
- Cycles take two or three runs to finish
- Burning or hot smell during a cycle
What a Dryer Repair Technician Checks
Care Kenmore Recommends for Its Dryers
- Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
- Use only 4-inch rigid or semi-rigid metal duct (no plastic or foil), check it for lint monthly and clean it at least yearly; one Elite steam model allows about 65 feet with no elbows and 28 feet with four 90-degree elbows using a 4-inch hood. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
What Kenmore Dryer Repairs Cost
Most Kenmore dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- Any error code on the display
- The brand, model and serial number from the label inside the door or on the back panel
Local Notes for Cherryland
Most dryer calls in Cherryland come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
California requires businesses that repair major home appliances such as refrigerators, ranges, dishwashers, washers and dryers for pay to register with the Bureau of Household Goods and Services as Major Home Appliance Service Dealers, including out-of-state providers serving California customers. Source: Application for Registration (Electronic and Appliance Repair Dealers) - Bureau of Household Goods and Services
Gas piping, gas appliance connections and gas safety devices fall within the C-36 Plumbing Contractor classification licensed by the Contractors State License Board. Source: C-36 - Plumbing Contractor, Licensing Classifications Detail - CSLB
Before You Book in Cherryland
- If a part has to be ordered, how soon can you come back to finish?
- Do you work on gas dryers, and who handles anything involving the gas line?
- What guarantee do you give on parts and labor?
Kenmore Dryer Repair FAQs: Cherryland, CA
Is my Kenmore dryer worth repairing?
What makes a dryer stop heating?
Is this Kenmore customer service?
Why does my dryer take so long to dry?
Other Dryer Repair in Cherryland
More Kenmore Dryer Repair Pages Nearby
Before you call, find the model and serial number on your Kenmore dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.