Kenmore owners in Milford usually want two things from a repair company: experience with the brand and quick access to parts. The Milford list starts with companies that name Kenmore, followed by other appliance repair companies that list dryer work.
Washer and Dryer Repair is independent and not affiliated with Kenmore. Listed companies are independent technicians who repair Kenmore dryers and other brands.
If you bought your Kenmore at Sears, you do not need to go back to Sears for a repair. Independent technicians near Milford work on Kenmore dryers every week.
Independent Kenmore Dryer Technicians, Milford DE
Our data shows 24 appliance repair companies inside a 30-mile radius of Milford. 1 list an address in Milford, and the rest are spread across Dover (7), Rehoboth Beach (2), and Cape May (2). Distances run up to about 30 miles. Sears Appliance Repair is the nearest, roughly 1.1 miles from Milford. None of the repair companies near Milford name Kenmore in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. The 20 rated companies in range average 3.9 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Appliance repair companies in range (30 mi) | 24 |
|---|---|
| Listing Saturday hours | 14 |
| Show laundry appliance work | 9 |
| Three nearest companies, miles away | 1.1, 7.9, 14.9 |
| Rated 4.5 stars or higher (10+ reviews) | 9 |
| Mention Kenmore | 0 |
The leading options for Milford are Sears Appliance Repair (1.1 miles away, 4.6 stars from 573 reviews, lists Saturday hours); Big Red Services - HVAC, Plumbing, Electric (16.3 miles away, based in Camden Wyoming, 4.9 stars from 335 reviews); Sears Appliance Repair (21.0 miles away, based in Rehoboth Beach, 4.6 stars from 563 reviews, lists Saturday hours); County Appliance Service (16.3 miles away, based in Wyoming, 4.9 stars from 73 reviews).
Kenmore Dryer Features Technicians Work On
What a Kenmore Dryer Technician Deals With
Kenmore's compact condensing dryer needs no outside wall vent, runs on a 220V supply and offers manual-drain or direct-drain water removal. Source: Kenmore - 4.0 cu. ft. Front-Load Electric Condensing Dryer
SmartDry Ultra dryers combine two moisture sensors with a temperature monitor and a dual heating element to fine-tune heat and cycle length. Source: Kenmore - 8.8 cu. ft. Electric Dryer w/ SmartDry Ultra Technology
What Kenmore Says to Check First
- Dryer vibrating or noisy. Kenmore says to level the dryer on its four feet without extending them more than needed and keep at least an inch of clearance at the sides and back. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Check Vent light blinking. Kenmore says the exhaust is seriously restricted and the ducts should be cleaned and inspected before using the dryer again. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Dryer Codes Mean
| Code | What it means |
|---|---|
| PS (Elite steam dryers) | The power cord on an electric model is wired incorrectly; check the neutral on the center terminal. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| CHECK FILTER (Elite steam dryers) | A reminder to clean the lint filter before the load. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| gAS (Elite steam dryers) | The gas supply is off on a gas model; open the house and dryer gas shutoffs. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore smart washers and dryers can check diagnostics through the Kenmore Smart app or Alexa and send app notices about blocked filters and other machine issues. Source: Kenmore - Kenmore Elite 81782 Smart 7.4 cu. ft. Electric Dryer with Accela Steam
Kenmore Dryer Problems Worth a Service Call
- Squealing, thumping or grinding while it runs
- Drum turns but the air stays cool
- Drum will not turn even though you hear a hum
How a Dryer Service Call Usually Goes in Milford
Owner Care for Kenmore Dryers
- Use only 4-inch rigid or semi-rigid metal duct (no plastic or foil), check it for lint monthly and clean it at least yearly; one Elite steam model allows about 65 feet with no elbows and 28 feet with four 90-degree elbows using a 4-inch hood. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Budgeting for a Kenmore Dryer Repair
Most Kenmore dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a Kenmore Dryer Call
- Whether the dryer is gas or electric
- How long the vent run is and where it exits the house
- Any error code on the display
Local Notes for Milford
Most dryer calls in Milford come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Delaware does not issue a separate appliance repair license; its plumbing and HVACR licensing law covers gas piping but excludes installing gas appliances where service connections already exist. Source: Delaware Code Title 24, Chapter 18, Subchapter I
Gas piping installation and connection falls within licensed plumbing and HVACR services overseen by the state Board of Plumbing, Heating, Ventilation, Air Conditioning, and Refrigeration Examiners, and the homeowner exemption does not cover gas piping. Source: Delaware Code Title 24, Chapter 18, Subchapter II
Before You Book in Milford
- If a part has to be ordered, how soon can you come back to finish?
- Can you give a written estimate before ordering parts?
- Is your company licensed where my state requires it, and insured?
Kenmore Dryer Repair FAQs: Milford, DE
Why is my dryer running but not heating?
Which Milford technicians work on Kenmore?
Should I repair or replace my Kenmore dryer?
Why do my clothes come out damp?
Other Dryer Repair in Milford
More Kenmore Dryer Repair Pages Nearby
Before you call, find the model and serial number on your Kenmore dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.