A Kenmore dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. The Perry list starts with companies that name Kenmore, followed by other appliance repair companies that list dryer work.
This is an independent directory. We are not affiliated with Kenmore, and the technicians listed are independent repair companies, not the manufacturer.
If you bought your Kenmore at Sears, you do not need to go back to Sears for a repair. Independent technicians near Perry work on Kenmore dryers every week.
Who Works on Kenmore Dryers Near Perry
Within 60 miles of Perry there are 33 appliance repair companies in our data. 3 list an address in Perry, and the rest are spread across Tallahassee (9), Valdosta (8), and Thomasville (4). The farthest listed company is about 58 miles out. Nearest on the list: Honest Jim's Appliances, around 1.4 miles out. None of the repair companies near Perry name Kenmore in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. The 31 rated companies in range average 4.2 stars. Perry is a smaller market, so expect a longer drive and ask whether a trip charge applies.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention Kenmore | 0 |
|---|---|
| Repair companies inside 60 miles | 33 |
| With 4.5+ stars and at least 10 reviews | 9 |
| Listing Saturday hours | 17 |
| Distance to the three closest (mi) | 1.4, 2.8, 4.3 |
| List dryer or washer & dryer work | 3 |
The leading options for Perry are Mr. Appliance of Tallahassee (47.8 miles away, based in Tallahassee, 4.7 stars from 445 reviews); Sears Appliance Repair (53.2 miles away, based in Valdosta, 4.7 stars from 287 reviews, lists Saturday hours); Bedonewitit Appliance Repair LLC (35.8 miles away, based in Live Oak, 4.9 stars from 58 reviews, lists Saturday hours); Glover and Son’s Appliance Repair and More (4.3 miles away, 5.0 stars from 2 reviews).
Kenmore Dryer Lines and Features
How Kenmore Dryers Are Built
On Kenmore Elite steam dryers, the display reports ductwork restriction in steps (d80, d90, d95) and a blinking CHECK VENT, which the guide says is an exhaust problem rather than a dryer failure. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Accela Steam dryers connect directly to the household water supply, so the inlet hose and water pressure (20 to 120 psi) become part of a steam-dryer service check. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Says to Check First
- Clothes wrinkled after drying. Kenmore says to remove clothes promptly, avoid overloading, and use Wrinkle Guard or a short touch-up cycle. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer not heating. Kenmore says to check for a tripped breaker or blown fuse and, on gas models, confirm the gas supply is on, noting an electric dryer can tumble without heat on a partial circuit. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Dryer Codes Mean
| Code | What it means |
|---|---|
| d80 / d90 / d95 (Elite steam dryers) | The exhaust ductwork is roughly 80, 90 or 95 percent blocked; stop using the dryer until the vent is cleaned or repaired. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| tE1-tE7 (Elite steam dryers) | A temperature sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| CL (Elite steam dryers) | Control Lock is on. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore smart washers and dryers can check diagnostics through the Kenmore Smart app or Alexa and send app notices about blocked filters and other machine issues. Source: Kenmore - Kenmore Elite 81782 Smart 7.4 cu. ft. Electric Dryer with Accela Steam
Signs Your Kenmore Dryer Needs a Technician
- Outside of the cabinet gets unusually hot
- Drum will not turn even though you hear a hum
- Clothes still damp after a full cycle
How a Dryer Service Call Usually Goes in Perry
Care Kenmore Recommends for Its Dryers
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
- Use only 4-inch rigid or semi-rigid metal duct (no plastic or foil), check it for lint monthly and clean it at least yearly; one Elite steam model allows about 65 feet with no elbows and 28 feet with four 90-degree elbows using a 4-inch hood. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Budgeting for a Kenmore Dryer Repair
A Kenmore dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a Kenmore Dryer Call
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- Whether the dryer is gas or electric
- Any error code on the display
Dryer Notes for Perry, FL
Most dryer calls in Perry come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Florida's construction licensing guidance says that paid work such as installing a dishwasher connected to drinking water or replacing a water heater requires a licensed contractor, and that a local business tax receipt or certificate of competency may also apply; it does not describe a separate state appliance repair license. Source: DBPR License Requirements and Exemptions (Construction Industry Licensing Board), posted by Columbia County
In Florida, you can check a license with the DBPR Verify a License (MyFloridaLicense.com) or report a problem to the Florida Attorney General, Office of Citizen Services / Consumer Protection.
How to Choose a Dryer Technician Near Perry
- How often do you repair Kenmore dryers, and do you carry common parts on the truck?
- What guarantee do you give on parts and labor?
- If a part has to be ordered, how soon can you come back to finish?
Kenmore Dryer Repair FAQs: Perry, FL
Do you work for Kenmore?
Why is my dryer running but not heating?
What should I do about a Kenmore error code?
Which Perry technicians work on Kenmore?
Other Dryer Repair in Perry
Kenmore Dryer Repair in Nearby Cities
Before you call, find the model and serial number on your Kenmore dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.