A Kenmore dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. The Lihue list starts with companies that name Kenmore, followed by other appliance repair companies that list dryer work.
This is an independent directory. We are not affiliated with Kenmore, and the technicians listed are independent repair companies, not the manufacturer.
Kenmore dryers were made for Sears by several manufacturers over the years, so the model number matters more than the badge. Independent technicians can look up the parts from it.
Kenmore Dryer Repair Near Lihue
6 repair companies serve Lihue from within 92 miles. 1 list an address in Lihue, and the rest are spread across Wahiawa (2), Kekaha (1), and Waianae (1). The farthest listed company is about 91 miles out. Nearest on the list: Sears Appliance Repair, around 1.5 miles out. No company within 90 miles of Lihue mentions Kenmore by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 6 rated companies in range average 4.0 stars. Because the nearest shops are farther out, ask each company whether Lihue is inside its regular service area.
Companies are shown by relevance and distance from Lihue. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Rated 4.5 stars or higher (10+ reviews) | 0 |
|---|---|
| Three nearest companies, miles away | 1.5, 26.5, 81.8 |
| Open on Saturdays (per listing) | 2 |
| Repair companies inside 92 miles | 6 |
| Show laundry appliance work | 2 |
| Mention Kenmore | 0 |
First up for Lihue: Sears Appliance Repair (1.5 miles away, 4.4 stars from 105 reviews, lists Saturday hours); RC Appliance Repair (26.5 miles away, based in Kekaha, 4.3 stars from 6 reviews); Makaha Appliance Repair (81.8 miles away, based in Waianae, 1.6 stars from 13 reviews); Dan's Appliance Repairs (91.1 miles away, based in Wahiawa, 4.3 stars from 31 reviews).
Kenmore Dryer Features Technicians Work On
What a Kenmore Dryer Technician Deals With
On Kenmore Elite steam dryers, the display reports ductwork restriction in steps (d80, d90, d95) and a blinking CHECK VENT, which the guide says is an exhaust problem rather than a dryer failure. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Says to Check First
- Check Vent light blinking. Kenmore says the exhaust is seriously restricted and the ducts should be cleaned and inspected before using the dryer again. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer won't start. Kenmore says to confirm the cord is fully plugged into a grounded outlet and the breaker is intact, and to turn off Control Lock if buttons beep but nothing happens. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Reading a Kenmore Dryer Error Code
| Code | What it means |
|---|---|
| d80 / d90 / d95 (Elite steam dryers) | The exhaust ductwork is roughly 80, 90 or 95 percent blocked; stop using the dryer until the vent is cleaned or repaired. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| gAS (Elite steam dryers) | The gas supply is off on a gas model; open the house and dryer gas shutoffs. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| PF / nP (Elite steam dryers) | A power supply or cord connection problem; check the cord at the terminal block and the house fuse or breaker. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
When to Call for Kenmore Dryer Repair
- Squealing, thumping or grinding while it runs
- Burning or hot smell during a cycle
- Drum will not turn even though you hear a hum
What Gets Fixed on a Lihue Dryer Call
Care Kenmore Recommends for Its Dryers
- If the lint screen looks clogged when held to the light, scrub it with hot soapy water and a stiff brush and let it dry fully before reinstalling. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Use only 4-inch rigid or semi-rigid metal duct (no plastic or foil), check it for lint monthly and clean it at least yearly; one Elite steam model allows about 65 feet with no elbows and 28 feet with four 90-degree elbows using a 4-inch hood. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Kenmore Dryer Repair Cost Ranges
Most Kenmore dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a Kenmore Dryer Call
- How long the vent run is and where it exits the house
- Any error code on the display
- Whether the dryer is gas or electric
Local Notes for Lihue
Most dryer calls in Lihue come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Hawaii has no appliance repair license classification; the Contractors License Board's specialty classifications cover related trades such as plumbing (including fuel gas piping), refrigeration, and ventilating and air conditioning, and a contractor license applies to jobs that need a building, electrical or plumbing permit. Source: Description of Contractor License Classifications (Hawaii DCCA Contractors License Board)
Installing and repairing fuel gas piping systems and their venting falls under the C-37 plumbing contractor classification, and plumbing contractors must use licensed plumbers for that work. Source: Description of Contractor License Classifications (Hawaii DCCA Contractors License Board)
Before You Book in Lihue
- If a part has to be ordered, how soon can you come back to finish?
- Will you check the vent and lint path as part of the visit?
- Do you work on gas dryers, and who handles anything involving the gas line?
Kenmore Dryer Repair FAQs: Lihue, HI
Is this Kenmore customer service?
Why is my dryer running but not heating?
Should I repair or replace my Kenmore dryer?
Related Repair Pages for Lihue
Kenmore Dryer Repair in Nearby Cities
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a Kenmore repair.