Kenmore owners in Niles usually want two things from a repair company: experience with the brand and quick access to parts. The Niles list starts with companies that name Kenmore, followed by other appliance repair companies that list dryer work.
This is an independent directory. We are not affiliated with Kenmore, and the technicians listed are independent repair companies, not the manufacturer.
Kenmore dryers were made for Sears by several manufacturers over the years, so the model number matters more than the badge. Independent technicians can look up the parts from it.
Who Works on Kenmore Dryers Near Niles
40 repair companies serve Niles from within 30 miles. 3 list an address in Niles, and other nearby bases include Chicago (10), Glenview (7), and Skokie (7). The farthest listed company is about 5 miles out. Nearest on the list: Niles Appliance Repair Experts, around 0.3 miles out. No company within 30 miles of Niles names Kenmore in its listing, so the list adds matches from farther out and the closest appliance repair companies. The 37 rated companies in range average 4.2 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| With 4.5+ stars and at least 10 reviews | 20 |
|---|---|
| Open on Saturdays (per listing) | 50 |
| List dryer or washer & dryer work | 19 |
| Appliance repair companies in range (30 mi) | 60 |
| Three nearest companies, miles away | 0.3, 0.6, 1.0 |
| Mention Kenmore | 0 |
The leading options for Niles are Sears Appliance Repair (82.4 miles away, based in Peru, 4.4 stars from 70 reviews, lists Saturday hours); Main Appliance Reliance Repair (3.9 miles away, based in Des Plaines, 5.0 stars from 133 reviews, lists Saturday hours); UltraFix Appliance Repair (3.8 miles away, based in Glenview, 4.8 stars from 855 reviews, lists Saturday hours); Ali Appliance Repair (2.6 miles away, based in Des Plaines, 5.0 stars from 252 reviews, lists Saturday hours).
Kenmore Dryer Features Technicians Work On
What a Kenmore Dryer Technician Deals With
SmartDry Ultra dryers combine two moisture sensors with a temperature monitor and a dual heating element to fine-tune heat and cycle length. Source: Kenmore - 8.8 cu. ft. Electric Dryer w/ SmartDry Ultra Technology
Common Kenmore Dryer Problems
- Dryer takes too long to dry. Kenmore says to clean the lint filter of lint and softener residue and check the exhaust duct for buildup or excess length. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Clothes wrinkled after drying. Kenmore says to remove clothes promptly, avoid overloading, and use Wrinkle Guard or a short touch-up cycle. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Reading a Kenmore Dryer Error Code
| Code | What it means |
|---|---|
| HS (Elite steam dryers) | The humidity (moisture) sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| d80 / d90 / d95 (Elite steam dryers) | The exhaust ductwork is roughly 80, 90 or 95 percent blocked; stop using the dryer until the vent is cleaned or repaired. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| PF / nP (Elite steam dryers) | A power supply or cord connection problem; check the cord at the terminal block and the house fuse or breaker. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore Dryer Problems Worth a Service Call
- Drum will not turn even though you hear a hum
- Cycles take two or three runs to finish
- Drum turns but the air stays cool
How a Dryer Service Call Usually Goes in Niles
Care Kenmore Recommends for Its Dryers
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
- Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Budgeting for a Kenmore Dryer Repair
Price the repair before replacing a Kenmore dryer. Published ranges for common jobs:
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- Any error code on the display
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- Whether the dryer is gas or electric
Around Niles
Most dryer calls in Niles come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
In Illinois, you can check a license with the Illinois Department of Public Health Plumber License Search or report a problem to the Illinois Attorney General Consumer Fraud Bureau.
Before You Book in Niles
- Is your company licensed where my state requires it, and insured?
- If a part has to be ordered, how soon can you come back to finish?
- What guarantee do you give on parts and labor?
Kenmore Dryer Repair FAQs: Niles, IL
Why does my Kenmore dryer show an error code?
Is this Kenmore customer service?
How do I find a technician who knows Kenmore dryers?
Why does my dryer take so long to dry?
More Laundry Repair in Niles, IL
Kenmore Dryer Repair Near Niles
Write down any error code your Kenmore dryer shows and when it appears. It helps a Niles technician bring the right parts.