Most Kenmore dryer repairs in Shiloh involve the same few systems: heat, airflow, the drum drive and the controls. The Shiloh list starts with companies that name Kenmore, followed by other appliance repair companies that list dryer work.
Washer and Dryer Repair is independent and not affiliated with Kenmore. Listed companies are independent technicians who repair Kenmore dryers and other brands.
If you bought your Kenmore at Sears, you do not need to go back to Sears for a repair. Independent technicians near Shiloh work on Kenmore dryers every week.
Kenmore Dryer Repair Near Shiloh
We found 40 appliance repair companies within 30 miles of Shiloh. Other nearby bases include St. Louis (16), Belleville (4), and Fairview Heights (3). Distances run up to about 22 miles. None of the companies within 30 miles mention Kenmore by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. Appliance Repair Ruby is the nearest, roughly 2.4 miles from Shiloh. Across 30 rated companies, the average public rating is 4.2 stars.
Companies are shown by relevance and distance from Shiloh. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| With 4.5+ stars and at least 10 reviews | 15 |
|---|---|
| Appliance repair companies in range (30 mi) | 60 |
| Open on Saturdays (per listing) | 39 |
| Mention Kenmore | 0 |
| List dryer or washer & dryer work | 13 |
| Three nearest companies, miles away | 2.4, 3.8, 3.9 |
The leading options for Shiloh are Sears Appliance Repair (56.9 miles away, based in Perryville, 4.6 stars from 132 reviews, lists Saturday hours); Sears Appliance Repair (82.6 miles away, based in Jacksonville, 4.3 stars from 45 reviews, lists Saturday hours); Mr. Appliance of Mid America (4.2 miles away, based in Fairview Heights, 4.8 stars from 1,246 reviews, lists Saturday hours); Sears Appliance Repair (4.5 miles away, based in Fairview Heights, 4.3 stars from 242 reviews, lists Saturday hours).
Kenmore Dryer Features Technicians Work On
What a Kenmore Dryer Technician Deals With
Kenmore's compact condensing dryer needs no outside wall vent, runs on a 220V supply and offers manual-drain or direct-drain water removal. Source: Kenmore - 4.0 cu. ft. Front-Load Electric Condensing Dryer
What Kenmore Says to Check First
- Dryer won't start. Kenmore says to confirm the cord is fully plugged into a grounded outlet and the breaker is intact, and to turn off Control Lock if buttons beep but nothing happens. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer vibrating or noisy. Kenmore says to level the dryer on its four feet without extending them more than needed and keep at least an inch of clearance at the sides and back. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Kenmore Dryer Error Codes
| Code | What it means |
|---|---|
| PF / nP (Elite steam dryers) | A power supply or cord connection problem; check the cord at the terminal block and the house fuse or breaker. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| CHECK FILTER (Elite steam dryers) | A reminder to clean the lint filter before the load. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| HS (Elite steam dryers) | The humidity (moisture) sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
When to Call for Kenmore Dryer Repair
- Dryer shuts off a few minutes into the cycle
- Drum will not turn even though you hear a hum
- Squealing, thumping or grinding while it runs
What a Dryer Repair Technician Checks
Owner Care for Kenmore Dryers
- Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
- If the lint screen looks clogged when held to the light, scrub it with hot soapy water and a stiff brush and let it dry fully before reinstalling. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Kenmore Dryer Repair Cost Ranges
Most Kenmore dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- Any error code on the display
- How long the vent run is and where it exits the house
- What happens when you press Start (no response, hum, runs with no heat, stops early)
What Shiloh Owners Should Know
Most dryer calls in Shiloh come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
In Illinois, you can check a license with the Illinois Department of Public Health Plumber License Search or report a problem to the Illinois Attorney General Consumer Fraud Bureau.
Before You Book in Shiloh
- What guarantee do you give on parts and labor?
- Will you check the vent and lint path as part of the visit?
- Can you give a written estimate before ordering parts?
Kenmore Dryer Repair FAQs: Shiloh, IL
Should I repair or replace my Kenmore dryer?
What makes a dryer stop heating?
Do you work for Kenmore?
What should I do about a Kenmore error code?
Other Dryer Repair in Shiloh
Kenmore Dryer Repair Near Shiloh
Before you call, find the model and serial number on your Kenmore dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.