Kenmore owners in Gramercy usually want two things from a repair company: experience with the brand and quick access to parts. The Gramercy list starts with companies that name Kenmore, followed by other appliance repair companies that list dryer work.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by Kenmore. If your dryer is still under manufacturer coverage, contact Kenmore directly.
Kenmore appliances were sold through Sears for decades, so many owners look for Sears dryer repair. The companies here are independent technicians who work on Kenmore and Kenmore Elite dryers; they are not Sears.
Who Works on Kenmore Dryers Near Gramercy
30 repair companies serve Gramercy from within 30 miles. The rest are spread across Kenner (4), St Amant (3), and Thibodaux (3). No company within 90 miles of Gramercy mentions Kenmore by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Edgard Appliance Repair is the nearest, roughly 1.9 miles from Gramercy. Rated companies nearby average 3.7 stars across 29 businesses.
Companies are shown by relevance and distance from Gramercy. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Repair companies inside 30 miles | 30 |
|---|---|
| List dryer or washer & dryer work | 9 |
| Open on Saturdays (per listing) | 15 |
| Distance to the three closest (mi) | 1.9, 5.2, 8.6 |
| With 4.5+ stars and at least 10 reviews | 7 |
| Mention Kenmore | 0 |
First up for Gramercy: Sears Appliance Repair (17.6 miles away, based in Gonzales, 4.5 stars from 139 reviews, lists Saturday hours); Sears Appliance Repair (28.7 miles away, based in Metairie, 4.6 stars from 222 reviews, lists Saturday hours); A&R Appliance Repair (25.5 miles away, based in Kenner, 4.7 stars from 48 reviews); A-Pro Appliance Repair (28.2 miles away, based in Metairie, 5.0 stars from 136 reviews, lists Saturday hours).
Know Your Kenmore Dryer
What Makes Kenmore Dryer Repairs Different
On Kenmore Elite steam dryers, the display reports ductwork restriction in steps (d80, d90, d95) and a blinking CHECK VENT, which the guide says is an exhaust problem rather than a dryer failure. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
SmartDry Ultra dryers combine two moisture sensors with a temperature monitor and a dual heating element to fine-tune heat and cycle length. Source: Kenmore - 8.8 cu. ft. Electric Dryer w/ SmartDry Ultra Technology
What Kenmore Says to Check First
- Clothes wrinkled after drying. Kenmore says to remove clothes promptly, avoid overloading, and use Wrinkle Guard or a short touch-up cycle. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer not heating. Kenmore says to check for a tripped breaker or blown fuse and, on gas models, confirm the gas supply is on, noting an electric dryer can tumble without heat on a partial circuit. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Reading a Kenmore Dryer Error Code
| Code | What it means |
|---|---|
| PS (Elite steam dryers) | The power cord on an electric model is wired incorrectly; check the neutral on the center terminal. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| d80 / d90 / d95 (Elite steam dryers) | The exhaust ductwork is roughly 80, 90 or 95 percent blocked; stop using the dryer until the vent is cleaned or repaired. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| tE1-tE7 (Elite steam dryers) | A temperature sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
When to Call for Kenmore Dryer Repair
- Cycles take two or three runs to finish
- Burning or hot smell during a cycle
- Dryer will not start when you press Start
What Gets Fixed on a Gramercy Dryer Call
Owner Care for Kenmore Dryers
- Use only 4-inch rigid or semi-rigid metal duct (no plastic or foil), check it for lint monthly and clean it at least yearly; one Elite steam model allows about 65 feet with no elbows and 28 feet with four 90-degree elbows using a 4-inch hood. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
What Kenmore Dryer Repairs Cost
Most Kenmore dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- The brand, model and serial number from the label inside the door or on the back panel
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- Any error code on the display
What Gramercy Owners Should Know
Most dryer calls in Gramercy come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Louisiana does not issue a separate appliance repair license; installing, repairing, altering or removing natural gas piping and gas appliances attached to real property for the public is gas fitting work licensed by the State Plumbing Board of Louisiana. Source: La. R.S. 37:1361 (Louisiana State Legislature)
In Louisiana, you can check a license with the Louisiana State Licensing Board for Contractors Verify License Search or report a problem to the Louisiana Attorney General, Public Protection Division, Consumer Protection Section.
Before You Book in Gramercy
- Do you work on gas dryers, and who handles anything involving the gas line?
- Will you check the vent and lint path as part of the visit?
- Can you give a written estimate before ordering parts?
Kenmore Dryer Repair FAQs: Gramercy, LA
Is my Kenmore dryer worth repairing?
Do you work for Kenmore?
Why does my dryer take so long to dry?
Which Gramercy technicians work on Kenmore?
Other Dryer Repair in Gramercy
Kenmore Dryer Repair in Nearby Cities
Before you call, find the model and serial number on your Kenmore dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.