Most Kenmore dryer repairs in Glencoe involve the same few systems: heat, airflow, the drum drive and the controls. We flag companies whose listing or website mentions Kenmore and fill in with nearby dryer repair companies so you always have options.
Washer and Dryer Repair is independent and not affiliated with Kenmore. Listed companies are independent technicians who repair Kenmore dryers and other brands.
If you bought your Kenmore at Sears, you do not need to go back to Sears for a repair. Independent technicians near Glencoe work on Kenmore dryers every week.
Independent Kenmore Dryer Technicians, Glencoe MN
Our data shows 40 appliance repair companies inside a 60-mile radius of Glencoe. 1 list an address in Glencoe, and other nearby bases include Eden Prairie (5), Hopkins (5), and Wayzata (3). Distances run up to about 38 miles. None of the companies within 60 miles mention Kenmore by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. The closest is HOME SOLUTIONS__True Value Hardware__&__Appliances__&__Mattresses, about 0.1 miles away. Rated companies nearby average 4.4 stars across 26 businesses. Glencoe is a smaller market, so expect a longer drive and ask whether a trip charge applies.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention Kenmore | 0 |
|---|---|
| Listing Saturday hours | 47 |
| Rated 4.5 stars or higher (10+ reviews) | 23 |
| Repair companies inside 60 miles | 60 |
| Three nearest companies, miles away | 0.1, 12.7, 14.5 |
| List dryer or washer & dryer work | 14 |
Closest matches for Glencoe: Sears Appliance Repair (49.3 miles away, based in Willmar, 4.5 stars from 37 reviews, lists Saturday hours); HOME SOLUTIONS__True Value Hardware__&__Appliances__&__Mattresses (0.1 miles away, 4.4 stars from 94 reviews, lists Saturday hours); West Metro Appliance Repair (33.5 miles away, based in Wayzata, 5.0 stars from 70 reviews, lists Saturday hours); West Metro Appliance Repair (35.7 miles away, based in Eden Prairie, 4.8 stars from 173 reviews, lists Saturday hours).
Kenmore Dryer Features Technicians Work On
What a Kenmore Dryer Technician Deals With
On Kenmore Elite steam dryers, the display reports ductwork restriction in steps (d80, d90, d95) and a blinking CHECK VENT, which the guide says is an exhaust problem rather than a dryer failure. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Common Kenmore Dryer Problems
- Dryer vibrating or noisy. Kenmore says to level the dryer on its four feet without extending them more than needed and keep at least an inch of clearance at the sides and back. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Check Vent light blinking. Kenmore says the exhaust is seriously restricted and the ducts should be cleaned and inspected before using the dryer again. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Reading a Kenmore Dryer Error Code
| Code | What it means |
|---|---|
| CHECK FILTER (Elite steam dryers) | A reminder to clean the lint filter before the load. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| PF / nP (Elite steam dryers) | A power supply or cord connection problem; check the cord at the terminal block and the house fuse or breaker. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| CL (Elite steam dryers) | Control Lock is on. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore smart washers and dryers can check diagnostics through the Kenmore Smart app or Alexa and send app notices about blocked filters and other machine issues. Source: Kenmore - Kenmore Elite 81782 Smart 7.4 cu. ft. Electric Dryer with Accela Steam
When to Call for Kenmore Dryer Repair
- Drum will not turn even though you hear a hum
- Dryer shuts off a few minutes into the cycle
- Dryer will not start when you press Start
Inside a Dryer Repair Visit
Keeping a Kenmore Dryer Running
- Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
What Kenmore Dryer Repairs Cost
A Kenmore dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair (most homeowners): $100–$430 Source: Angi - How Much Does Dryer Repair Cost?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- How long the vent run is and where it exits the house
- Any error code on the display
- The brand, model and serial number from the label inside the door or on the back panel
Dryer Notes for Glencoe, MN
Most dryer calls in Glencoe come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Minnesota has no state license for mechanical contractors or their workers; businesses contracting for gas, heating, cooling or refrigeration work file a mechanical contractor bond with the Department of Labor and Industry, and some cities require their own licenses or competency cards. Source: DLI: Mechanical contractor bond requirements
The state does not license gas fitters; contractors doing gas work must be bonded with the Department of Labor and Industry, and cities such as Minneapolis and St. Paul set their own gas fitter licensing. Source: DLI: Mechanical contractor bond requirements
Questions to Ask a Glencoe Technician
- Do you work on gas dryers, and who handles anything involving the gas line?
- Is your company licensed where my state requires it, and insured?
- If a part has to be ordered, how soon can you come back to finish?
Kenmore Dryer Repair FAQs: Glencoe, MN
Why do my clothes come out damp?
What makes a dryer stop heating?
Do you work for Kenmore?
Should I repair or replace my Kenmore dryer?
Related Repair Pages for Glencoe
More Kenmore Dryer Repair Pages Nearby
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a Kenmore repair.