If your Kenmore dryer has stopped heating, stopped tumbling or started throwing an error code, the technician you call should know the model line. We flag companies whose listing or website mentions Kenmore and fill in with nearby dryer repair companies so you always have options.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by Kenmore. If your dryer is still under manufacturer coverage, contact Kenmore directly.
Kenmore dryers were made for Sears by several manufacturers over the years, so the model number matters more than the badge. Independent technicians can look up the parts from it.
Who Works on Kenmore Dryers Near Arnold
Our data shows 40 appliance repair companies inside a 30-mile radius of Arnold. Other nearby bases include St. Louis (22), Affton (2), and Festus (2). Distances run up to about 19 miles. None of the companies within 30 miles mention Kenmore by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. The closest is Appliance-Mend.com LLC, about 5.1 miles away. Rated companies nearby average 4.5 stars across 27 businesses.
Companies are shown by relevance and distance from Arnold. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| List dryer or washer & dryer work | 11 |
|---|---|
| Appliance repair companies in range (30 mi) | 60 |
| Three nearest companies, miles away | 5.1, 5.7, 6.0 |
| Rated 4.5 stars or higher (10+ reviews) | 18 |
| Mention Kenmore | 0 |
| Open on Saturdays (per listing) | 41 |
First up for Arnold: Sears Appliance Repair (55.1 miles away, based in Perryville, 4.6 stars from 132 reviews, lists Saturday hours); Sears Appliance Repair (89.6 miles away, based in Jacksonville, 4.3 stars from 45 reviews, lists Saturday hours); Mr. Appliance of Greater St. Louis (13.1 miles away, based in Ballwin, 4.8 stars from 1,345 reviews, lists Saturday hours); All American Appliance and HVAC Services (16.9 miles away, based in St. Louis, 4.7 stars from 2,771 reviews, lists Saturday hours).
Kenmore Dryer Lines and Features
How Kenmore Dryers Are Built
On Kenmore Elite steam dryers, the display reports ductwork restriction in steps (d80, d90, d95) and a blinking CHECK VENT, which the guide says is an exhaust problem rather than a dryer failure. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
SmartDry Ultra dryers combine two moisture sensors with a temperature monitor and a dual heating element to fine-tune heat and cycle length. Source: Kenmore - 8.8 cu. ft. Electric Dryer w/ SmartDry Ultra Technology
What Kenmore Says to Check First
- Dryer won't start. Kenmore says to confirm the cord is fully plugged into a grounded outlet and the breaker is intact, and to turn off Control Lock if buttons beep but nothing happens. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Check Vent light blinking. Kenmore says the exhaust is seriously restricted and the ducts should be cleaned and inspected before using the dryer again. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Dryer Codes Mean
| Code | What it means |
|---|---|
| CHECK FILTER (Elite steam dryers) | A reminder to clean the lint filter before the load. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| d80 / d90 / d95 (Elite steam dryers) | The exhaust ductwork is roughly 80, 90 or 95 percent blocked; stop using the dryer until the vent is cleaned or repaired. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| HS (Elite steam dryers) | The humidity (moisture) sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore smart washers and dryers can check diagnostics through the Kenmore Smart app or Alexa and send app notices about blocked filters and other machine issues. Source: Kenmore - Kenmore Elite 81782 Smart 7.4 cu. ft. Electric Dryer with Accela Steam
Kenmore Dryer Problems Worth a Service Call
- Drum turns but the air stays cool
- Dryer will not start when you press Start
- Outside of the cabinet gets unusually hot
How a Dryer Service Call Usually Goes in Arnold
Keeping a Kenmore Dryer Running
- Use only 4-inch rigid or semi-rigid metal duct (no plastic or foil), check it for lint monthly and clean it at least yearly; one Elite steam model allows about 65 feet with no elbows and 28 feet with four 90-degree elbows using a 4-inch hood. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Kenmore Dryer Repair Cost Ranges
Price the repair before replacing a Kenmore dryer. Published ranges for common jobs:
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Typical dryer repair (most homeowners): $100–$430 Source: Angi - How Much Does Dryer Repair Cost?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- Any error code on the display
- Whether the dryer is gas or electric
- The brand, model and serial number from the label inside the door or on the back panel
What Arnold Owners Should Know
Most dryer calls in Arnold come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Gas appliance and mechanical trade credentials are issued by local governments; Kansas City, for example, certifies gas-fired appliance supervisors, mechanical supervisors and master pipe fitters. Source: KCMO BizCare: Contractor Licensing
In Missouri, you can report a problem to the Missouri Attorney General's Office, Consumer Protection.
Questions to Ask a Arnold Technician
- Do you work on gas dryers, and who handles anything involving the gas line?
- What guarantee do you give on parts and labor?
- How often do you repair Kenmore dryers, and do you carry common parts on the truck?
Kenmore Dryer Repair FAQs: Arnold, MO
Should I repair or replace my Kenmore dryer?
Why is my dryer running but not heating?
Why does my dryer take so long to dry?
Related Repair Pages for Arnold
Kenmore Dryer Repair in Nearby Cities
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a Kenmore repair.