Most Kenmore dryer repairs in Cameron involve the same few systems: heat, airflow, the drum drive and the controls. The Cameron list starts with companies that name Kenmore, followed by other appliance repair companies that list dryer work.
This is an independent directory. We are not affiliated with Kenmore, and the technicians listed are independent repair companies, not the manufacturer.
Kenmore dryers were made for Sears by several manufacturers over the years, so the model number matters more than the badge. Independent technicians can look up the parts from it.
Who Works on Kenmore Dryers Near Cameron
We found 40 appliance repair companies within 60 miles of Cameron. 1 of them are based in Cameron itself, and the rest are spread across Kansas City (14), Independence (6), and St Joseph (5). The farthest listed company is about 58 miles out. 1 of them mentions Kenmore in their listing or website. Nearest on the list: Sears Appliance Repair, around 0.7 miles out. The 37 rated companies in range average 4.6 stars. Because the nearest shops are farther out, ask each company whether Cameron is inside its regular service area.
Companies are shown by relevance and distance from Cameron. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Rated 4.5 stars or higher (10+ reviews) | 22 |
|---|---|
| Distance to the three closest (mi) | 0.7, 30.1, 30.2 |
| Appliance repair companies in range (60 mi) | 47 |
| Listing Saturday hours | 32 |
| Mention Kenmore | 1 |
| Show laundry appliance work | 12 |
First up for Cameron: Sears Appliance Repair (0.7 miles away, 4.8 stars from 118 reviews, lists Saturday hours); Greg's Appliances (30.1 miles away, based in St Joseph, 4.6 stars from 303 reviews, lists Saturday hours); Sears Appliance Repair (30.2 miles away, based in St Joseph, 4.7 stars from 226 reviews, lists Saturday hours); Arrowhead Appliance Repair (49.8 miles away, based in Independence, 4.8 stars from 234 reviews, lists Saturday hours).
Kenmore Dryer Features Technicians Work On
What Makes Kenmore Dryer Repairs Different
Kenmore's Check Vent sensor alerts the owner when the dryer is not moving enough air to the outside. Source: Kenmore - Laundry List: Kenmore Dryer Buying Guide
Kenmore Dryer Symptoms and First Checks
- Check Vent light blinking. Kenmore says the exhaust is seriously restricted and the ducts should be cleaned and inspected before using the dryer again. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer takes too long to dry. Kenmore says to clean the lint filter of lint and softener residue and check the exhaust duct for buildup or excess length. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Reading a Kenmore Dryer Error Code
| Code | What it means |
|---|---|
| CHECK FILTER (Elite steam dryers) | A reminder to clean the lint filter before the load. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| d80 / d90 / d95 (Elite steam dryers) | The exhaust ductwork is roughly 80, 90 or 95 percent blocked; stop using the dryer until the vent is cleaned or repaired. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| HS (Elite steam dryers) | The humidity (moisture) sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
When to Call for Kenmore Dryer Repair
- Burning or hot smell during a cycle
- Drum will not turn even though you hear a hum
- Drum turns but the air stays cool
Inside a Dryer Repair Visit
Owner Care for Kenmore Dryers
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
- If the lint screen looks clogged when held to the light, scrub it with hot soapy water and a stiff brush and let it dry fully before reinstalling. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Budgeting for a Kenmore Dryer Repair
Price the repair before replacing a Kenmore dryer. Published ranges for common jobs:
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a Kenmore Dryer Call
- Any error code on the display
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- Whether the dryer is gas or electric
Dryer Notes for Cameron, MO
Most dryer calls in Cameron come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Gas appliance and mechanical trade credentials are issued by local governments; Kansas City, for example, certifies gas-fired appliance supervisors, mechanical supervisors and master pipe fitters. Source: KCMO BizCare: Contractor Licensing
In Missouri, you can report a problem to the Missouri Attorney General's Office, Consumer Protection.
Before You Book in Cameron
- What guarantee do you give on parts and labor?
- Do you work on gas dryers, and who handles anything involving the gas line?
- What is the service call or diagnostic fee, and is it applied to the repair?
Kenmore Dryer Repair FAQs: Cameron, MO
Do you work for Kenmore?
Why is my dryer running but not heating?
How do I find a technician who knows Kenmore dryers?
More Laundry Repair in Cameron, MO
More Kenmore Dryer Repair Pages Nearby
Before you call, find the model and serial number on your Kenmore dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.