A Kenmore dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. Below are independent repair companies serving Platte City, with those that mention Kenmore first, then the nearest dryer repair companies.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by Kenmore. If your dryer is still under manufacturer coverage, contact Kenmore directly.
If you bought your Kenmore at Sears, you do not need to go back to Sears for a repair. Independent technicians near Platte City work on Kenmore dryers every week.
Independent Kenmore Dryer Technicians, Platte City MO
39 repair companies serve Platte City from within 30 miles. 1 of them are based in Platte City itself, and the rest are spread across Kansas City (14), Overland Park (5), and Independence (5). The farthest listed company is about 30 miles out. Nearest on the list: Appliance Service Headquarters LLC, around 5.6 miles out. No company within 30 miles of Platte City names Kenmore in its listing, so the list adds matches from farther out and the closest appliance repair companies. Rated companies nearby average 4.6 stars across 35 businesses.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Mention Kenmore | 0 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 17 |
| Show laundry appliance work | 8 |
| Three nearest companies, miles away | 5.6, 9.3, 10.8 |
| Companies within 30 miles | 39 |
| Open on Saturdays (per listing) | 27 |
First up for Platte City: Sears Appliance Repair (39.5 miles away, based in Cameron, 4.8 stars from 118 reviews, lists Saturday hours); Appliance Shark (26.5 miles away, based in Prairie Village, 4.9 stars from 118 reviews, lists Saturday hours); Greg's Appliances (27.1 miles away, based in St Joseph, 4.6 stars from 303 reviews, lists Saturday hours); Sears Appliance Repair (28.7 miles away, based in Independence, 4.5 stars from 909 reviews, lists Saturday hours).
Kenmore Dryer Lines and Features
How Kenmore Dryers Are Built
Accela Steam dryers connect directly to the household water supply, so the inlet hose and water pressure (20 to 120 psi) become part of a steam-dryer service check. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Common Kenmore Dryer Problems
- Dryer vibrating or noisy. Kenmore says to level the dryer on its four feet without extending them more than needed and keep at least an inch of clearance at the sides and back. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer not heating. Kenmore says to check for a tripped breaker or blown fuse and, on gas models, confirm the gas supply is on, noting an electric dryer can tumble without heat on a partial circuit. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Reading a Kenmore Dryer Error Code
| Code | What it means |
|---|---|
| PS (Elite steam dryers) | The power cord on an electric model is wired incorrectly; check the neutral on the center terminal. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| d80 / d90 / d95 (Elite steam dryers) | The exhaust ductwork is roughly 80, 90 or 95 percent blocked; stop using the dryer until the vent is cleaned or repaired. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| CL (Elite steam dryers) | Control Lock is on. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore smart washers and dryers can check diagnostics through the Kenmore Smart app or Alexa and send app notices about blocked filters and other machine issues. Source: Kenmore - Kenmore Elite 81782 Smart 7.4 cu. ft. Electric Dryer with Accela Steam
Signs Your Kenmore Dryer Needs a Technician
- Squealing, thumping or grinding while it runs
- Clothes still damp after a full cycle
- Dryer will not start when you press Start
Inside a Dryer Repair Visit
Care Kenmore Recommends for Its Dryers
- Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
What Kenmore Dryer Repairs Cost
A Kenmore dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Typical dryer repair (most homeowners): $100–$430 Source: Angi - How Much Does Dryer Repair Cost?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- How long the vent run is and where it exits the house
- Any error code on the display
- What happens when you press Start (no response, hum, runs with no heat, stops early)
What Platte City Owners Should Know
Most dryer calls in Platte City come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Gas appliance and mechanical trade credentials are issued by local governments; Kansas City, for example, certifies gas-fired appliance supervisors, mechanical supervisors and master pipe fitters. Source: KCMO BizCare: Contractor Licensing
In Missouri, you can report a problem to the Missouri Attorney General's Office, Consumer Protection.
How to Choose a Dryer Technician Near Platte City
- Will you check the vent and lint path as part of the visit?
- What guarantee do you give on parts and labor?
- Do you work on gas dryers, and who handles anything involving the gas line?
Kenmore Dryer Repair FAQs: Platte City, MO
Should I repair or replace my Kenmore dryer?
Which Platte City technicians work on Kenmore?
Do you work for Kenmore?
Other Dryer Repair in Platte City
Kenmore Dryer Repair in Nearby Cities
Write down any error code your Kenmore dryer shows and when it appears. It helps a Platte City technician bring the right parts.