A GE dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. The Platte City list starts with companies that name GE, followed by other appliance repair companies that list dryer work.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by GE. If your dryer is still under manufacturer coverage, contact GE directly.
GE Dryer Repair Near Platte City
We found 39 appliance repair companies within 30 miles of Platte City. 1 list an address in Platte City, and other nearby bases include Kansas City (14), Overland Park (5), and Independence (5). The farthest listed company is about 30 miles out. Appliance Service Headquarters LLC is the nearest, roughly 5.6 miles from Platte City. No company within 30 miles of Platte City names GE in its listing, so the list adds matches from farther out and the closest appliance repair companies. Rated companies nearby average 4.6 stars across 35 businesses.
Companies are shown by relevance and distance from Platte City. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Distance to the three closest (mi) | 5.6, 9.3, 10.8 |
|---|---|
| List dryer or washer & dryer work | 8 |
| Mention GE | 0 |
| Companies within 30 miles | 39 |
| With 4.5+ stars and at least 10 reviews | 17 |
| Open on Saturdays (per listing) | 27 |
Closest matches for Platte City: Sears Appliance Repair (39.5 miles away, based in Cameron, 4.8 stars from 118 reviews, lists Saturday hours); Appliance Shark (26.5 miles away, based in Prairie Village, 4.9 stars from 118 reviews, lists Saturday hours); Able Appliance Repair (15.0 miles away, based in Kansas City, 4.9 stars from 4,981 reviews, lists Saturday hours); Dennis' Refrigeration & Appliance. (9.3 miles away, based in Leavenworth, 4.2 stars from 16 reviews, lists Saturday hours).
GE Dryer Lines and Features
What Makes GE Dryer Repairs Different
The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
Sensor dry models must sit level so tumbling clothes contact the moisture sensors; an unlevel dryer can end cycles with clothes still damp. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
What GE Says to Check First
- Dryer takes too long to dry. GE points first to venting (metal duct, no kinks, clear wall cap) and a clean lint filter, then to load size, dryer level and washer spin speed. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
- Gas dryer runs but does not heat. GE says to confirm a real drying cycle and temperature are selected, keep the front of the dryer unblocked, check the dedicated 120V outlet, and on new installs make sure the gas line is turned on. Source: GE Appliances - Gas Dryer - Runs But Does Not Heat
What GE Dryer Codes Mean
| Code | What it means |
|---|---|
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
GE Dryer Problems Worth a Service Call
- Burning or hot smell during a cycle
- Drum will not turn even though you hear a hum
- Drum turns but the air stays cool
Inside a Dryer Repair Visit
Keeping a GE Dryer Running
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
Brand guides: GE Dryer Not Heating: What to Check.
GE Dryer Repair Cost Ranges
Price the repair before replacing a GE dryer. Published ranges for common jobs:
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- Whether the dryer is gas or electric
- Any error code on the display
- The brand, model and serial number from the label inside the door or on the back panel
Around Platte City
Most dryer calls in Platte City come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Gas appliance and mechanical trade credentials are issued by local governments; Kansas City, for example, certifies gas-fired appliance supervisors, mechanical supervisors and master pipe fitters. Source: KCMO BizCare: Contractor Licensing
In Missouri, you can report a problem to the Missouri Attorney General's Office, Consumer Protection.
Hiring a Dryer Repair Company in Platte City
- Is your company licensed where my state requires it, and insured?
- What is the service call or diagnostic fee, and is it applied to the repair?
- Can you give a written estimate before ordering parts?
GE Dryer Repair FAQs: Platte City, MO
Is my GE dryer worth repairing?
Why does my dryer take so long to dry?
What makes a dryer stop heating?
Is this GE customer service?
Related Repair Pages for Platte City
More GE Dryer Repair Pages Nearby
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a GE repair.