Most Kenmore dryer repairs in Park Hills involve the same few systems: heat, airflow, the drum drive and the controls. The Park Hills list starts with companies that name Kenmore, followed by other appliance repair companies that list dryer work.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by Kenmore. If your dryer is still under manufacturer coverage, contact Kenmore directly.
If you bought your Kenmore at Sears, you do not need to go back to Sears for a repair. Independent technicians near Park Hills work on Kenmore dryers every week.
Who Works on Kenmore Dryers Near Park Hills
Within 60 miles of Park Hills there are 40 appliance repair companies in our data. Other nearby bases include St. Louis (11), Belleville (3), and Festus (2). 1 of them mentions Kenmore in their listing or website. Nearest on the list: Midwest Appliance Repair, LLC, around 18.4 miles out. Across 32 rated companies, the average public rating is 4.4 stars. Park Hills is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Companies are shown by relevance and distance from Park Hills. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Three nearest companies, miles away | 18.4, 27.6, 27.6 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 19 |
| Mention Kenmore | 1 |
| List dryer or washer & dryer work | 12 |
| Open on Saturdays (per listing) | 37 |
| Repair companies inside 60 miles | 59 |
Closest matches for Park Hills: Sears Appliance Repair (34.4 miles away, based in Perryville, 4.6 stars from 132 reviews, lists Saturday hours); Midwest Appliance Repair, LLC (18.4 miles away, based in De Soto, 5.0 stars from 1,596 reviews); Appliance-Mend.com (40.1 miles away, based in Waterloo, 4.8 stars from 55 reviews); Mr. Appliance of Greater St. Louis (53.6 miles away, based in Ballwin, 4.8 stars from 1,345 reviews, lists Saturday hours).
Kenmore Dryer Features Technicians Work On
What a Kenmore Dryer Technician Deals With
Kenmore's compact condensing dryer needs no outside wall vent, runs on a 220V supply and offers manual-drain or direct-drain water removal. Source: Kenmore - 4.0 cu. ft. Front-Load Electric Condensing Dryer
Accela Steam dryers connect directly to the household water supply, so the inlet hose and water pressure (20 to 120 psi) become part of a steam-dryer service check. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Kenmore Dryer Symptoms and First Checks
- Dryer takes too long to dry. Kenmore says to clean the lint filter of lint and softener residue and check the exhaust duct for buildup or excess length. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Check Vent light blinking. Kenmore says the exhaust is seriously restricted and the ducts should be cleaned and inspected before using the dryer again. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Dryer Codes Mean
| Code | What it means |
|---|---|
| tE1-tE7 (Elite steam dryers) | A temperature sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| CHECK FILTER (Elite steam dryers) | A reminder to clean the lint filter before the load. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| d80 / d90 / d95 (Elite steam dryers) | The exhaust ductwork is roughly 80, 90 or 95 percent blocked; stop using the dryer until the vent is cleaned or repaired. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore smart washers and dryers can check diagnostics through the Kenmore Smart app or Alexa and send app notices about blocked filters and other machine issues. Source: Kenmore - Kenmore Elite 81782 Smart 7.4 cu. ft. Electric Dryer with Accela Steam
Kenmore Dryer Problems Worth a Service Call
- Dryer will not start when you press Start
- Outside of the cabinet gets unusually hot
- Cycles take two or three runs to finish
What a Dryer Repair Technician Checks
Care Kenmore Recommends for Its Dryers
- Use only 4-inch rigid or semi-rigid metal duct (no plastic or foil), check it for lint monthly and clean it at least yearly; one Elite steam model allows about 65 feet with no elbows and 28 feet with four 90-degree elbows using a 4-inch hood. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
What Kenmore Dryer Repairs Cost
A Kenmore dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair (most homeowners): $100–$430 Source: Angi - How Much Does Dryer Repair Cost?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- Whether the dryer is gas or electric
- The brand, model and serial number from the label inside the door or on the back panel
- How long the vent run is and where it exits the house
Dryer Notes for Park Hills, MO
Most dryer calls in Park Hills come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Gas appliance and mechanical trade credentials are issued by local governments; Kansas City, for example, certifies gas-fired appliance supervisors, mechanical supervisors and master pipe fitters. Source: KCMO BizCare: Contractor Licensing
In Missouri, you can report a problem to the Missouri Attorney General's Office, Consumer Protection.
Hiring a Dryer Repair Company in Park Hills
- If a part has to be ordered, how soon can you come back to finish?
- What is the service call or diagnostic fee, and is it applied to the repair?
- Is your company licensed where my state requires it, and insured?
Kenmore Dryer Repair FAQs: Park Hills, MO
What should I do about a Kenmore error code?
Do you work for Kenmore?
Why do my clothes come out damp?
Related Repair Pages for Park Hills
More Kenmore Dryer Repair Pages Nearby
Write down any error code your Kenmore dryer shows and when it appears. It helps a Park Hills technician bring the right parts.