A Kenmore dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. Below are independent repair companies serving Lockwood, with those that mention Kenmore first, then the nearest dryer repair companies.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by Kenmore. If your dryer is still under manufacturer coverage, contact Kenmore directly.
Kenmore appliances were sold through Sears for decades, so many owners look for Sears dryer repair. The companies here are independent technicians who work on Kenmore and Kenmore Elite dryers; they are not Sears.
Who Works on Kenmore Dryers Near Lockwood
11 repair companies serve Lockwood from within 60 miles. The rest are spread across Billings (11). No company within 90 miles of Lockwood mentions Kenmore by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is Appliance Repair Billings MT, about 3.2 miles away. Across 11 rated companies, the average public rating is 4.2 stars. Because the nearest shops are farther out, ask each company whether Lockwood is inside its regular service area.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Mention Kenmore | 0 |
|---|---|
| Companies within 60 miles | 11 |
| With 4.5+ stars and at least 10 reviews | 3 |
| Listing Saturday hours | 4 |
| Three nearest companies, miles away | 3.2, 5.0, 5.7 |
| List dryer or washer & dryer work | 3 |
At the top of the Lockwood list: Big Sky Appliance Repair (7.2 miles away, based in Billings, 4.9 stars from 105 reviews); Fred's Appliance (9.4 miles away, based in Billings, 4.4 stars from 739 reviews, lists Saturday hours); Sears Appliance Repair (7.5 miles away, based in Billings, 1.0 stars from 3 reviews, lists Saturday hours); Revive Appliance Repair (6.9 miles away, based in Billings, 5.0 stars from 75 reviews).
Kenmore Dryer Lines and Features
What Makes Kenmore Dryer Repairs Different
On Kenmore Elite steam dryers, the display reports ductwork restriction in steps (d80, d90, d95) and a blinking CHECK VENT, which the guide says is an exhaust problem rather than a dryer failure. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
SmartDry Ultra dryers combine two moisture sensors with a temperature monitor and a dual heating element to fine-tune heat and cycle length. Source: Kenmore - 8.8 cu. ft. Electric Dryer w/ SmartDry Ultra Technology
Kenmore Dryer Symptoms and First Checks
- Clothes wrinkled after drying. Kenmore says to remove clothes promptly, avoid overloading, and use Wrinkle Guard or a short touch-up cycle. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer not heating. Kenmore says to check for a tripped breaker or blown fuse and, on gas models, confirm the gas supply is on, noting an electric dryer can tumble without heat on a partial circuit. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Dryer Codes Mean
| Code | What it means |
|---|---|
| tE1-tE7 (Elite steam dryers) | A temperature sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| PF / nP (Elite steam dryers) | A power supply or cord connection problem; check the cord at the terminal block and the house fuse or breaker. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| HS (Elite steam dryers) | The humidity (moisture) sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Signs Your Kenmore Dryer Needs a Technician
- Drum will not turn even though you hear a hum
- Dryer will not start when you press Start
- Cycles take two or three runs to finish
What Gets Fixed on a Lockwood Dryer Call
Care Kenmore Recommends for Its Dryers
- Use only 4-inch rigid or semi-rigid metal duct (no plastic or foil), check it for lint monthly and clean it at least yearly; one Elite steam model allows about 65 feet with no elbows and 28 feet with four 90-degree elbows using a 4-inch hood. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Kenmore Dryer Repair Cost Ranges
A Kenmore dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair (most homeowners): $100–$430 Source: Angi - How Much Does Dryer Repair Cost?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- The brand, model and serial number from the label inside the door or on the back panel
- How long the vent run is and where it exits the house
- Any error code on the display
Local Notes for Lockwood
Most dryer calls in Lockwood come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Montana's plumber licensing law does not cover fuel gas piping; gas piping and gas appliance installations are handled through mechanical permits and inspections by the state Building Codes Program or certified local governments, under the International Fuel Gas Code. Source: Montana DLI Building Codes: Mechanical Permits
In Montana, you can check a license with the Montana DLI Construction Contractor Registration Lookup or report a problem to the Montana Department of Justice, Office of Consumer Protection.
Before You Book in Lockwood
- What guarantee do you give on parts and labor?
- If a part has to be ordered, how soon can you come back to finish?
- What is the service call or diagnostic fee, and is it applied to the repair?
Kenmore Dryer Repair FAQs: Lockwood, MT
What makes a dryer stop heating?
What should I do about a Kenmore error code?
Why do my clothes come out damp?
More Laundry Repair in Lockwood, MT
More Kenmore Dryer Repair Pages Nearby
Write down any error code your Kenmore dryer shows and when it appears. It helps a Lockwood technician bring the right parts.