A Kenmore dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. The Butte list starts with companies that name Kenmore, followed by other appliance repair companies that list dryer work.
Washer and Dryer Repair is independent and not affiliated with Kenmore. Listed companies are independent technicians who repair Kenmore dryers and other brands.
Kenmore appliances were sold through Sears for decades, so many owners look for Sears dryer repair. The companies here are independent technicians who work on Kenmore and Kenmore Elite dryers; they are not Sears.
Kenmore Dryer Repair Near Butte
We found 6 appliance repair companies within 62 miles of Butte. 2 of them are based in Butte itself, and other nearby bases include Helena (4). The farthest listed company is about 61 miles out. Sears Appliance Repair is the nearest, roughly 9.0 miles from Butte. None of the repair companies near Butte name Kenmore in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. The 5 rated companies in range average 3.8 stars. Because the nearest shops are farther out, ask each company whether Butte is inside its regular service area.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Show laundry appliance work | 2 |
|---|---|
| Open on Saturdays (per listing) | 2 |
| Rated 4.5 stars or higher (10+ reviews) | 2 |
| Appliance repair companies in range (62 mi) | 6 |
| Distance to the three closest (mi) | 9.0, 9.5, 57.4 |
| Mention Kenmore | 0 |
Closest matches for Butte: Sears Appliance Repair (9.0 miles away, lists Saturday hours); Bowman Appliance Repair (9.5 miles away, 4.3 stars from 62 reviews); Sears Appliance Repair (57.7 miles away, based in Helena, 2.0 stars from 1 reviews, lists Saturday hours); Capital Appliance Services (57.4 miles away, based in Helena, 4.7 stars from 117 reviews).
Kenmore Dryer Lines and Features
What a Kenmore Dryer Technician Deals With
On Kenmore Elite steam dryers, the display reports ductwork restriction in steps (d80, d90, d95) and a blinking CHECK VENT, which the guide says is an exhaust problem rather than a dryer failure. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Accela Steam dryers connect directly to the household water supply, so the inlet hose and water pressure (20 to 120 psi) become part of a steam-dryer service check. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Kenmore Dryer Symptoms and First Checks
- Dryer not heating. Kenmore says to check for a tripped breaker or blown fuse and, on gas models, confirm the gas supply is on, noting an electric dryer can tumble without heat on a partial circuit. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer vibrating or noisy. Kenmore says to level the dryer on its four feet without extending them more than needed and keep at least an inch of clearance at the sides and back. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Dryer Codes Mean
| Code | What it means |
|---|---|
| CL (Elite steam dryers) | Control Lock is on. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| PS (Elite steam dryers) | The power cord on an electric model is wired incorrectly; check the neutral on the center terminal. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| PF / nP (Elite steam dryers) | A power supply or cord connection problem; check the cord at the terminal block and the house fuse or breaker. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
When to Call for Kenmore Dryer Repair
- Squealing, thumping or grinding while it runs
- Drum will not turn even though you hear a hum
- Cycles take two or three runs to finish
What Gets Fixed on a Butte Dryer Call
Care Kenmore Recommends for Its Dryers
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
- Use only 4-inch rigid or semi-rigid metal duct (no plastic or foil), check it for lint monthly and clean it at least yearly; one Elite steam model allows about 65 feet with no elbows and 28 feet with four 90-degree elbows using a 4-inch hood. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Kenmore Dryer Repair Cost Ranges
Price the repair before replacing a Kenmore dryer. Published ranges for common jobs:
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair: $100–$200 Source: Fixr - How much does it cost to repair a dryer?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a Kenmore Dryer Call
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- Whether the dryer is gas or electric
- How long the vent run is and where it exits the house
Around Butte
Most dryer calls in Butte come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Montana's plumber licensing law does not cover fuel gas piping; gas piping and gas appliance installations are handled through mechanical permits and inspections by the state Building Codes Program or certified local governments, under the International Fuel Gas Code. Source: Montana DLI Building Codes: Mechanical Permits
In Montana, you can check a license with the Montana DLI Construction Contractor Registration Lookup or report a problem to the Montana Department of Justice, Office of Consumer Protection.
Hiring a Dryer Repair Company in Butte
- What is the service call or diagnostic fee, and is it applied to the repair?
- If a part has to be ordered, how soon can you come back to finish?
- Will you check the vent and lint path as part of the visit?
Kenmore Dryer Repair FAQs: Butte, MT
How do I find a technician who knows Kenmore dryers?
Why does my dryer take so long to dry?
Do you work for Kenmore?
Other Dryer Repair in Butte
Kenmore Dryer Repair Near Butte
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a Kenmore repair.