If your Kenmore dryer has stopped heating, stopped tumbling or started throwing an error code, the technician you call should know the model line. The Four Corners list starts with companies that name Kenmore, followed by other appliance repair companies that list dryer work.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by Kenmore. If your dryer is still under manufacturer coverage, contact Kenmore directly.
If you bought your Kenmore at Sears, you do not need to go back to Sears for a repair. Independent technicians near Four Corners work on Kenmore dryers every week.
Independent Kenmore Dryer Technicians, Four Corners MT
7 repair companies serve Four Corners from within 60 miles. The rest are spread across Bozeman (5) and Belgrade (2). No company within 90 miles of Four Corners mentions Kenmore by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Nearest on the list: Jonny's Appliance Sales & Service, around 0.6 miles out. Across 7 rated companies, the average public rating is 4.0 stars. Four Corners is a smaller market, so expect a longer drive and ask whether a trip charge applies.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention Kenmore | 0 |
|---|---|
| Open on Saturdays (per listing) | 4 |
| Distance to the three closest (mi) | 0.6, 4.4, 4.9 |
| List dryer or washer & dryer work | 3 |
| Appliance repair companies in range (60 mi) | 7 |
| With 4.5+ stars and at least 10 reviews | 3 |
The leading options for Four Corners are Fred's Appliance (5.9 miles away, based in Bozeman, 4.5 stars from 655 reviews, lists Saturday hours); Lake Appliance Repair (5.4 miles away, based in Bozeman, 4.7 stars from 517 reviews, lists Saturday hours); Stone's Maytag Service (6.4 miles away, based in Belgrade, 4.7 stars from 17 reviews); Sears Appliance Repair (4.9 miles away, based in Bozeman, 1.0 stars from 1 reviews, lists Saturday hours).
Know Your Kenmore Dryer
What a Kenmore Dryer Technician Deals With
Accela Steam dryers connect directly to the household water supply, so the inlet hose and water pressure (20 to 120 psi) become part of a steam-dryer service check. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
On Kenmore Elite steam dryers, the display reports ductwork restriction in steps (d80, d90, d95) and a blinking CHECK VENT, which the guide says is an exhaust problem rather than a dryer failure. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Kenmore Dryer Symptoms and First Checks
- Dryer not heating. Kenmore says to check for a tripped breaker or blown fuse and, on gas models, confirm the gas supply is on, noting an electric dryer can tumble without heat on a partial circuit. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer vibrating or noisy. Kenmore says to level the dryer on its four feet without extending them more than needed and keep at least an inch of clearance at the sides and back. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Dryer Codes Mean
| Code | What it means |
|---|---|
| PF / nP (Elite steam dryers) | A power supply or cord connection problem; check the cord at the terminal block and the house fuse or breaker. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| PS (Elite steam dryers) | The power cord on an electric model is wired incorrectly; check the neutral on the center terminal. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| gAS (Elite steam dryers) | The gas supply is off on a gas model; open the house and dryer gas shutoffs. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
When to Call for Kenmore Dryer Repair
- Drum will not turn even though you hear a hum
- Clothes still damp after a full cycle
- Outside of the cabinet gets unusually hot
What Gets Fixed on a Four Corners Dryer Call
Keeping a Kenmore Dryer Running
- Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
- If the lint screen looks clogged when held to the light, scrub it with hot soapy water and a stiff brush and let it dry fully before reinstalling. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Kenmore Dryer Repair Cost Ranges
A Kenmore dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a Kenmore Dryer Call
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- Any error code on the display
- The brand, model and serial number from the label inside the door or on the back panel
Around Four Corners
Most dryer calls in Four Corners come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Montana's plumber licensing law does not cover fuel gas piping; gas piping and gas appliance installations are handled through mechanical permits and inspections by the state Building Codes Program or certified local governments, under the International Fuel Gas Code. Source: Montana DLI Building Codes: Mechanical Permits
In Montana, you can check a license with the Montana DLI Construction Contractor Registration Lookup or report a problem to the Montana Department of Justice, Office of Consumer Protection.
How to Choose a Dryer Technician Near Four Corners
- Can you look at the washer on the same visit if it is acting up too?
- Do you work on gas dryers, and who handles anything involving the gas line?
- How often do you repair Kenmore dryers, and do you carry common parts on the truck?
Kenmore Dryer Repair FAQs: Four Corners, MT
Is my Kenmore dryer worth repairing?
How do I find a technician who knows Kenmore dryers?
What makes a dryer stop heating?
Related Repair Pages for Four Corners
More Kenmore Dryer Repair Pages Nearby
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a Kenmore repair.