A Kenmore dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. Below are independent repair companies serving Hillsdale, with those that mention Kenmore first, then the nearest dryer repair companies.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by Kenmore. If your dryer is still under manufacturer coverage, contact Kenmore directly.
If you bought your Kenmore at Sears, you do not need to go back to Sears for a repair. Independent technicians near Hillsdale work on Kenmore dryers every week.
Kenmore Dryer Repair Near Hillsdale
Within 30 miles of Hillsdale there are 40 appliance repair companies in our data. 1 list an address in Hillsdale, and other nearby bases include Paramus (6), Ridgewood (3), and Bergenfield (3). Distances run up to about 6 miles. None of the repair companies near Hillsdale name Kenmore in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. The closest is Hillsdale Appliance Repair Tech, about 0.3 miles away. Rated companies nearby average 4.8 stars across 36 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Rated 4.5 stars or higher (10+ reviews) | 10 |
|---|---|
| Open on Saturdays (per listing) | 37 |
| Repair companies inside 30 miles | 60 |
| Distance to the three closest (mi) | 0.3, 0.8, 1.1 |
| Mention Kenmore | 0 |
| Show laundry appliance work | 8 |
First up for Hillsdale: Mr. Appliance of Bergen County (4.3 miles away, based in Ridgewood, 4.6 stars from 317 reviews, lists Saturday hours); Sears Appliance Repair (3.8 miles away, based in Paramus, 4.4 stars from 266 reviews, lists Saturday hours); United Technical Services (2.1 miles away, based in Emerson, 4.9 stars from 161 reviews); All Bergen Appliance Service (5.9 miles away, based in Paramus, 4.5 stars from 360 reviews, lists Saturday hours).
Kenmore Dryer Lines and Features
How Kenmore Dryers Are Built
On Kenmore Elite steam dryers, the display reports ductwork restriction in steps (d80, d90, d95) and a blinking CHECK VENT, which the guide says is an exhaust problem rather than a dryer failure. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
SmartDry Ultra dryers combine two moisture sensors with a temperature monitor and a dual heating element to fine-tune heat and cycle length. Source: Kenmore - 8.8 cu. ft. Electric Dryer w/ SmartDry Ultra Technology
Common Kenmore Dryer Problems
- Dryer not heating. Kenmore says to check for a tripped breaker or blown fuse and, on gas models, confirm the gas supply is on, noting an electric dryer can tumble without heat on a partial circuit. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer takes too long to dry. Kenmore says to clean the lint filter of lint and softener residue and check the exhaust duct for buildup or excess length. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Reading a Kenmore Dryer Error Code
| Code | What it means |
|---|---|
| HS (Elite steam dryers) | The humidity (moisture) sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| PS (Elite steam dryers) | The power cord on an electric model is wired incorrectly; check the neutral on the center terminal. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| PF / nP (Elite steam dryers) | A power supply or cord connection problem; check the cord at the terminal block and the house fuse or breaker. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
When to Call for Kenmore Dryer Repair
- Cycles take two or three runs to finish
- Squealing, thumping or grinding while it runs
- Dryer will not start when you press Start
What Gets Fixed on a Hillsdale Dryer Call
Keeping a Kenmore Dryer Running
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
- If the lint screen looks clogged when held to the light, scrub it with hot soapy water and a stiff brush and let it dry fully before reinstalling. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
What Kenmore Dryer Repairs Cost
Most Kenmore dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- Whether the dryer is gas or electric
- How long the vent run is and where it exits the house
- What happens when you press Start (no response, hum, runs with no heat, stops early)
Around Hillsdale
Most dryer calls in Hillsdale come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
New Jersey has no license specific to appliance repair; plumbing work is reserved to state-licensed master plumbers, and gas piping work on the customer side of the meter falls under HVACR contractor licensing, both overseen by boards in the Division of Consumer Affairs. Source: NJ Division of Consumer Affairs: State Board of Examiners of Master Plumbers rule notice
Under state law, working on gas piping on the load side of the meter requires a master HVACR contractor license or another state license whose scope includes gas piping. Source: NJ Division of Consumer Affairs: State Board of Examiners of Master Plumbers rule notice
Questions to Ask a Hillsdale Technician
- If a part has to be ordered, how soon can you come back to finish?
- How often do you repair Kenmore dryers, and do you carry common parts on the truck?
- What is the service call or diagnostic fee, and is it applied to the repair?
Kenmore Dryer Repair FAQs: Hillsdale, NJ
Why is my dryer running but not heating?
Why does my Kenmore dryer show an error code?
Is my Kenmore dryer worth repairing?
Related Repair Pages for Hillsdale
More Kenmore Dryer Repair Pages Nearby
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a Kenmore repair.