A Kenmore dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. Below are independent repair companies serving Dayton, with those that mention Kenmore first, then the nearest dryer repair companies.
This is an independent directory. We are not affiliated with Kenmore, and the technicians listed are independent repair companies, not the manufacturer.
Kenmore dryers were made for Sears by several manufacturers over the years, so the model number matters more than the badge. Independent technicians can look up the parts from it.
Independent Kenmore Dryer Technicians, Dayton NV
31 repair companies serve Dayton from within 30 miles. The rest are spread across Reno (14), Carson City (5), and Sparks (5). The farthest listed company is about 29 miles out. None of the companies within 30 miles mention Kenmore by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. Nearest on the list: Service One Appliance Inc, around 10.5 miles out. Rated companies nearby average 4.3 stars across 24 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| With 4.5+ stars and at least 10 reviews | 12 |
|---|---|
| List dryer or washer & dryer work | 10 |
| Companies within 30 miles | 31 |
| Three nearest companies, miles away | 10.5, 11.8, 11.9 |
| Mention Kenmore | 0 |
| Open on Saturdays (per listing) | 20 |
The leading options for Dayton are Sears Appliance Repair (33.7 miles away, based in South Lake Tahoe, 4.5 stars from 60 reviews, lists Saturday hours); Sears Appliance Repair (11.9 miles away, based in Carson City, 4.5 stars from 89 reviews, lists Saturday hours); Mr. Appliance of Reno (21.1 miles away, based in Reno, 4.8 stars from 925 reviews, lists Saturday hours); Northern Nevada Appliance Outlet (13.6 miles away, based in Carson City, 4.5 stars from 292 reviews, lists Saturday hours).
Kenmore Dryer Lines and Features
What Makes Kenmore Dryer Repairs Different
Kenmore's compact condensing dryer needs no outside wall vent, runs on a 220V supply and offers manual-drain or direct-drain water removal. Source: Kenmore - 4.0 cu. ft. Front-Load Electric Condensing Dryer
SmartDry Ultra dryers combine two moisture sensors with a temperature monitor and a dual heating element to fine-tune heat and cycle length. Source: Kenmore - 8.8 cu. ft. Electric Dryer w/ SmartDry Ultra Technology
What Kenmore Says to Check First
- Dryer not heating. Kenmore says to check for a tripped breaker or blown fuse and, on gas models, confirm the gas supply is on, noting an electric dryer can tumble without heat on a partial circuit. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer vibrating or noisy. Kenmore says to level the dryer on its four feet without extending them more than needed and keep at least an inch of clearance at the sides and back. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Kenmore Dryer Error Codes
| Code | What it means |
|---|---|
| PF / nP (Elite steam dryers) | A power supply or cord connection problem; check the cord at the terminal block and the house fuse or breaker. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| gAS (Elite steam dryers) | The gas supply is off on a gas model; open the house and dryer gas shutoffs. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| d80 / d90 / d95 (Elite steam dryers) | The exhaust ductwork is roughly 80, 90 or 95 percent blocked; stop using the dryer until the vent is cleaned or repaired. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore smart washers and dryers can check diagnostics through the Kenmore Smart app or Alexa and send app notices about blocked filters and other machine issues. Source: Kenmore - Kenmore Elite 81782 Smart 7.4 cu. ft. Electric Dryer with Accela Steam
When to Call for Kenmore Dryer Repair
- Clothes still damp after a full cycle
- Drum turns but the air stays cool
- Cycles take two or three runs to finish
What a Dryer Repair Technician Checks
Owner Care for Kenmore Dryers
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
- Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Budgeting for a Kenmore Dryer Repair
Most Kenmore dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a Kenmore Dryer Call
- The brand, model and serial number from the label inside the door or on the back panel
- Any error code on the display
- What happens when you press Start (no response, hum, runs with no heat, stops early)
Dryer Notes for Dayton, NV
Most dryer calls in Dayton come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Nevada has no license class for appliance repair as such; contracting work on gas piping, gas vents and water heaters falls under the State Contractors Board's C-1 plumbing and heating subclassifications. Source: Nevada Administrative Code Chapter 624 (NAC 624.190)
Installing gas supply piping and vents requires a Nevada State Contractors Board license in the C-1 plumbing and heating classification (for example the C-1d plumbing or C-1g gas pipes and vents subclassifications), and water heater installation and repair falls under subclassification C-1h. Source: Nevada Administrative Code Chapter 624 (NAC 624.190)
Hiring a Dryer Repair Company in Dayton
- Can you look at the washer on the same visit if it is acting up too?
- Will you check the vent and lint path as part of the visit?
- Do you work on gas dryers, and who handles anything involving the gas line?
Kenmore Dryer Repair FAQs: Dayton, NV
Is my Kenmore dryer worth repairing?
What should I do about a Kenmore error code?
Do you work for Kenmore?
Related Repair Pages for Dayton
Kenmore Dryer Repair in Nearby Cities
Before you call, find the model and serial number on your Kenmore dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.