Most Kenmore dryer repairs in Glens Falls involve the same few systems: heat, airflow, the drum drive and the controls. The Glens Falls list starts with companies that name Kenmore, followed by other appliance repair companies that list dryer work.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by Kenmore. If your dryer is still under manufacturer coverage, contact Kenmore directly.
Kenmore appliances were sold through Sears for decades, so many owners look for Sears dryer repair. The companies here are independent technicians who work on Kenmore and Kenmore Elite dryers; they are not Sears.
Kenmore Dryer Repair Near Glens Falls
Our data shows 40 appliance repair companies inside a 60-mile radius of Glens Falls. Other nearby bases include Schenectady (11), Queensbury (3), and Clifton Park (3). Distances run up to about 40 miles. None of the repair companies near Glens Falls name Kenmore in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. The closest is Sears Appliance Repair, about 2.0 miles away. The 21 rated companies in range average 4.6 stars. Glens Falls is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Mention Kenmore | 0 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 20 |
| Open on Saturdays (per listing) | 38 |
| Distance to the three closest (mi) | 2.0, 2.3, 3.1 |
| List dryer or washer & dryer work | 12 |
| Companies within 60 miles | 60 |
Closest matches for Glens Falls: Mr. Appliance of Clifton Park (24.9 miles away, based in Ballston Spa, 4.9 stars from 1,422 reviews); Sears Appliance Repair (16.3 miles away, based in Greenwich, 4.4 stars from 113 reviews, lists Saturday hours); DADs Appliance Repair and More (34.6 miles away, based in Hagaman, 4.9 stars from 128 reviews, lists Saturday hours); Sears Appliance Repair (38.8 miles away, based in Schenectady, 4.5 stars from 116 reviews, lists Saturday hours).
Know Your Kenmore Dryer
What a Kenmore Dryer Technician Deals With
Accela Steam dryers connect directly to the household water supply, so the inlet hose and water pressure (20 to 120 psi) become part of a steam-dryer service check. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
On Kenmore Elite steam dryers, the display reports ductwork restriction in steps (d80, d90, d95) and a blinking CHECK VENT, which the guide says is an exhaust problem rather than a dryer failure. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Kenmore Dryer Symptoms and First Checks
- Dryer won't start. Kenmore says to confirm the cord is fully plugged into a grounded outlet and the breaker is intact, and to turn off Control Lock if buttons beep but nothing happens. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer not heating. Kenmore says to check for a tripped breaker or blown fuse and, on gas models, confirm the gas supply is on, noting an electric dryer can tumble without heat on a partial circuit. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Dryer Codes Mean
| Code | What it means |
|---|---|
| CL (Elite steam dryers) | Control Lock is on. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| gAS (Elite steam dryers) | The gas supply is off on a gas model; open the house and dryer gas shutoffs. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| d80 / d90 / d95 (Elite steam dryers) | The exhaust ductwork is roughly 80, 90 or 95 percent blocked; stop using the dryer until the vent is cleaned or repaired. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore smart washers and dryers can check diagnostics through the Kenmore Smart app or Alexa and send app notices about blocked filters and other machine issues. Source: Kenmore - Kenmore Elite 81782 Smart 7.4 cu. ft. Electric Dryer with Accela Steam
Signs Your Kenmore Dryer Needs a Technician
- Cycles take two or three runs to finish
- Dryer shuts off a few minutes into the cycle
- Burning or hot smell during a cycle
What Gets Fixed on a Glens Falls Dryer Call
Care Kenmore Recommends for Its Dryers
- If the lint screen looks clogged when held to the light, scrub it with hot soapy water and a stiff brush and let it dry fully before reinstalling. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Budgeting for a Kenmore Dryer Repair
Price the repair before replacing a Kenmore dryer. Published ranges for common jobs:
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair (most homeowners): $100–$430 Source: Angi - How Much Does Dryer Repair Cost?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- The brand, model and serial number from the label inside the door or on the back panel
- Any error code on the display
- What happens when you press Start (no response, hum, runs with no heat, stops early)
Dryer Notes for Glens Falls, NY
Most dryer calls in Glens Falls come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
New York State has no appliance repair license; home improvement contractor licensing is set locally, required in New York City and in Nassau, Suffolk, Westchester, Putnam and Rockland counties. Source: NY Attorney General: Contractor tip card
Gas work licensing is set locally; in New York City, for example, the Department of Buildings requires gas work to be done by a Licensed Master Plumber or by Gas Work Qualification holders under a master plumber's supervision. Source: NYC Department of Buildings: Local Law 150 of 2016 Gas Work Qualification Requirement
Hiring a Dryer Repair Company in Glens Falls
- Will you check the vent and lint path as part of the visit?
- Can you give a written estimate before ordering parts?
- Can you look at the washer on the same visit if it is acting up too?
Kenmore Dryer Repair FAQs: Glens Falls, NY
Why does my Kenmore dryer show an error code?
Should I repair or replace my Kenmore dryer?
Which Glens Falls technicians work on Kenmore?
Why do my clothes come out damp?
Related Repair Pages for Glens Falls
More Kenmore Dryer Repair Pages Nearby
Before you call, find the model and serial number on your Kenmore dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.