Most Kenmore dryer repairs in Sulphur involve the same few systems: heat, airflow, the drum drive and the controls. The Sulphur list starts with companies that name Kenmore, followed by other appliance repair companies that list dryer work.
This is an independent directory. We are not affiliated with Kenmore, and the technicians listed are independent repair companies, not the manufacturer.
If you bought your Kenmore at Sears, you do not need to go back to Sears for a repair. Independent technicians near Sulphur work on Kenmore dryers every week.
Independent Kenmore Dryer Technicians, Sulphur OK
We found 21 appliance repair companies within 60 miles of Sulphur. The rest are spread across Norman (5), Ardmore (4), and Durant (3). Scott's Appliance Sales and Service is the nearest, roughly 14.4 miles from Sulphur. No company within 90 miles of Sulphur mentions Kenmore by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 4.6 stars across 20 businesses. Sulphur is a smaller market, so expect a longer drive and ask whether a trip charge applies.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Three nearest companies, miles away | 14.4, 23.5, 23.7 |
|---|---|
| Repair companies inside 60 miles | 21 |
| Listing Saturday hours | 11 |
| Rated 4.5 stars or higher (10+ reviews) | 13 |
| Show laundry appliance work | 8 |
| Mention Kenmore | 0 |
First up for Sulphur: Sears Appliance Repair (23.7 miles away, based in Ardmore, 4.7 stars from 20 reviews, lists Saturday hours); Sears Appliance Repair (27.4 miles away, based in Ada, 4.5 stars from 47 reviews, lists Saturday hours); Adam's Appliance Repair, Inc (59.4 miles away, based in Norman, 5.0 stars from 462 reviews, lists Saturday hours); Scott's Appliance Sales and Service (14.4 miles away, based in Wynnewood, 4.9 stars from 36 reviews, lists Saturday hours).
Know Your Kenmore Dryer
How Kenmore Dryers Are Built
Accela Steam dryers connect directly to the household water supply, so the inlet hose and water pressure (20 to 120 psi) become part of a steam-dryer service check. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Says to Check First
- Dryer won't start. Kenmore says to confirm the cord is fully plugged into a grounded outlet and the breaker is intact, and to turn off Control Lock if buttons beep but nothing happens. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer vibrating or noisy. Kenmore says to level the dryer on its four feet without extending them more than needed and keep at least an inch of clearance at the sides and back. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Kenmore Dryer Error Codes
| Code | What it means |
|---|---|
| gAS (Elite steam dryers) | The gas supply is off on a gas model; open the house and dryer gas shutoffs. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| d80 / d90 / d95 (Elite steam dryers) | The exhaust ductwork is roughly 80, 90 or 95 percent blocked; stop using the dryer until the vent is cleaned or repaired. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| HS (Elite steam dryers) | The humidity (moisture) sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Signs Your Kenmore Dryer Needs a Technician
- Outside of the cabinet gets unusually hot
- Squealing, thumping or grinding while it runs
- Clothes still damp after a full cycle
What a Dryer Repair Technician Checks
Care Kenmore Recommends for Its Dryers
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
- Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Kenmore Dryer Repair Cost Ranges
A Kenmore dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair: $100–$200 Source: Fixr - How much does it cost to repair a dryer?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- How long the vent run is and where it exits the house
- Any error code on the display
Dryer Notes for Sulphur, OK
Most dryer calls in Sulphur come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Oklahoma has no general appliance repair license; mechanical licensing through the Construction Industries Board excludes minor repairs the manufacturer allows an owner or agent to make, but that exclusion does not reach gas piping, gas controls, appliance venting or opening a sealed refrigeration system. Source: OAC 158:50 Mechanical Industry Rules (Oklahoma Construction Industries Board)
Natural gas piping work requires a Natural Gas Piping mechanical license or a plumbing license issued by the Oklahoma Construction Industries Board. Source: OAC 158:50 Mechanical Industry Rules (Oklahoma Construction Industries Board)
How to Choose a Dryer Technician Near Sulphur
- Will you check the vent and lint path as part of the visit?
- Can you give a written estimate before ordering parts?
- Can you look at the washer on the same visit if it is acting up too?
Kenmore Dryer Repair FAQs: Sulphur, OK
Why does my dryer take so long to dry?
How do I find a technician who knows Kenmore dryers?
Is this Kenmore customer service?
Related Repair Pages for Sulphur
Kenmore Dryer Repair Near Sulphur
Before you call, find the model and serial number on your Kenmore dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.