Most Kenmore dryer repairs in Central Point involve the same few systems: heat, airflow, the drum drive and the controls. The Central Point list starts with companies that name Kenmore, followed by other appliance repair companies that list dryer work.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by Kenmore. If your dryer is still under manufacturer coverage, contact Kenmore directly.
If you bought your Kenmore at Sears, you do not need to go back to Sears for a repair. Independent technicians near Central Point work on Kenmore dryers every week.
Who Works on Kenmore Dryers Near Central Point
10 repair companies serve Central Point from within 60 miles. Other nearby bases include Medford (4), Grants Pass (3), and Klamath Falls (2). Surgeon Family Appliance is the nearest, roughly 2.9 miles from Central Point. None of the repair companies near Central Point name Kenmore in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. The 10 rated companies in range average 4.6 stars. Central Point is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Companies are shown by relevance and distance from Central Point. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Repair companies inside 60 miles | 10 |
|---|---|
| Show laundry appliance work | 2 |
| Three nearest companies, miles away | 2.9, 3.4, 4.2 |
| With 4.5+ stars and at least 10 reviews | 8 |
| Listing Saturday hours | 6 |
| Mention Kenmore | 0 |
Closest matches for Central Point: Just-in Time Appliance Repair (4.2 miles away, based in Medford, 4.8 stars from 233 reviews, lists Saturday hours); Sears Appliance Repair (20.8 miles away, based in Grants Pass, 4.2 stars from 125 reviews, lists Saturday hours); C&R Appliance Services (5.7 miles away, based in Medford, 4.8 stars from 438 reviews); Just-in Time Appliance Repair LLC (20.5 miles away, based in Grants Pass, 4.7 stars from 346 reviews).
Kenmore Dryer Features Technicians Work On
What Makes Kenmore Dryer Repairs Different
On Kenmore Elite steam dryers, the display reports ductwork restriction in steps (d80, d90, d95) and a blinking CHECK VENT, which the guide says is an exhaust problem rather than a dryer failure. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Kenmore's Check Vent sensor alerts the owner when the dryer is not moving enough air to the outside. Source: Kenmore - Laundry List: Kenmore Dryer Buying Guide
Kenmore Dryer Symptoms and First Checks
- Check Vent light blinking. Kenmore says the exhaust is seriously restricted and the ducts should be cleaned and inspected before using the dryer again. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer not heating. Kenmore says to check for a tripped breaker or blown fuse and, on gas models, confirm the gas supply is on, noting an electric dryer can tumble without heat on a partial circuit. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Reading a Kenmore Dryer Error Code
| Code | What it means |
|---|---|
| HS (Elite steam dryers) | The humidity (moisture) sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| PS (Elite steam dryers) | The power cord on an electric model is wired incorrectly; check the neutral on the center terminal. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| gAS (Elite steam dryers) | The gas supply is off on a gas model; open the house and dryer gas shutoffs. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
When to Call for Kenmore Dryer Repair
- Dryer will not start when you press Start
- Drum will not turn even though you hear a hum
- Clothes still damp after a full cycle
What Gets Fixed on a Central Point Dryer Call
Care Kenmore Recommends for Its Dryers
- Use only 4-inch rigid or semi-rigid metal duct (no plastic or foil), check it for lint monthly and clean it at least yearly; one Elite steam model allows about 65 feet with no elbows and 28 feet with four 90-degree elbows using a 4-inch hood. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Budgeting for a Kenmore Dryer Repair
Price the repair before replacing a Kenmore dryer. Published ranges for common jobs:
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- Any error code on the display
- How long the vent run is and where it exits the house
- What happens when you press Start (no response, hum, runs with no heat, stops early)
What Central Point Owners Should Know
Most dryer calls in Central Point come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Oregon has no license issued specifically for appliance repair that we could confirm, but anyone installing or servicing liquefied petroleum (LP) gas appliances needs an LP gas fitter license from the Oregon State Fire Marshal. Source: Liquefied Petroleum Gas licensing (Oregon State Fire Marshal)
In Oregon, you can check a license with the Oregon Construction Contractors Board Contractor/License Search or report a problem to the Oregon Department of Justice, Consumer Protection.
Hiring a Dryer Repair Company in Central Point
- Can you look at the washer on the same visit if it is acting up too?
- Will you check the vent and lint path as part of the visit?
- Is your company licensed where my state requires it, and insured?
Kenmore Dryer Repair FAQs: Central Point, OR
Which Central Point technicians work on Kenmore?
Is this Kenmore customer service?
Why does my Kenmore dryer show an error code?
Related Repair Pages for Central Point
Kenmore Dryer Repair Near Central Point
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a Kenmore repair.