If your Kenmore dryer has stopped heating, stopped tumbling or started throwing an error code, the technician you call should know the model line. The Ontario list starts with companies that name Kenmore, followed by other appliance repair companies that list dryer work.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by Kenmore. If your dryer is still under manufacturer coverage, contact Kenmore directly.
Kenmore appliances were sold through Sears for decades, so many owners look for Sears dryer repair. The companies here are independent technicians who work on Kenmore and Kenmore Elite dryers; they are not Sears.
Who Works on Kenmore Dryers Near Ontario
Our data shows 13 appliance repair companies inside a 30-mile radius of Ontario. Other nearby bases include Caldwell (5), Emmett (2), and Fruitland (1). Distances run up to about 30 miles. No company within 90 miles of Ontario mentions Kenmore by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Nearest on the list: Parkside Appliance Repair Mechanics, around 2.6 miles out. The 13 rated companies in range average 4.8 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Open on Saturdays (per listing) | 10 |
|---|---|
| Distance to the three closest (mi) | 2.6, 4.5, 8.6 |
| Show laundry appliance work | 0 |
| Mention Kenmore | 0 |
| Appliance repair companies in range (30 mi) | 13 |
| Rated 4.5 stars or higher (10+ reviews) | 3 |
First up for Ontario: Northside Appliance Repair (4.5 miles away, based in Payette, 3.7 stars from 3 reviews, lists Saturday hours); All Valley Appliance Repair LLP (28.4 miles away, based in Caldwell, 4.7 stars from 172 reviews); Parkside Appliance Repair Mechanics (2.6 miles away, based in Fruitland, 5.0 stars from 2 reviews, lists Saturday hours); K&N Appliance Repair (15.3 miles away, based in Weiser, 4.0 stars from 23 reviews).
Kenmore Dryer Features Technicians Work On
What a Kenmore Dryer Technician Deals With
On Kenmore Elite steam dryers, the display reports ductwork restriction in steps (d80, d90, d95) and a blinking CHECK VENT, which the guide says is an exhaust problem rather than a dryer failure. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
SmartDry Ultra dryers combine two moisture sensors with a temperature monitor and a dual heating element to fine-tune heat and cycle length. Source: Kenmore - 8.8 cu. ft. Electric Dryer w/ SmartDry Ultra Technology
Kenmore Dryer Symptoms and First Checks
- Dryer won't start. Kenmore says to confirm the cord is fully plugged into a grounded outlet and the breaker is intact, and to turn off Control Lock if buttons beep but nothing happens. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer vibrating or noisy. Kenmore says to level the dryer on its four feet without extending them more than needed and keep at least an inch of clearance at the sides and back. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Kenmore Dryer Error Codes
| Code | What it means |
|---|---|
| HS (Elite steam dryers) | The humidity (moisture) sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| tE1-tE7 (Elite steam dryers) | A temperature sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| PF / nP (Elite steam dryers) | A power supply or cord connection problem; check the cord at the terminal block and the house fuse or breaker. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore smart washers and dryers can check diagnostics through the Kenmore Smart app or Alexa and send app notices about blocked filters and other machine issues. Source: Kenmore - Kenmore Elite 81782 Smart 7.4 cu. ft. Electric Dryer with Accela Steam
Signs Your Kenmore Dryer Needs a Technician
- Squealing, thumping or grinding while it runs
- Drum will not turn even though you hear a hum
- Drum turns but the air stays cool
What Gets Fixed on a Ontario Dryer Call
Care Kenmore Recommends for Its Dryers
- Use only 4-inch rigid or semi-rigid metal duct (no plastic or foil), check it for lint monthly and clean it at least yearly; one Elite steam model allows about 65 feet with no elbows and 28 feet with four 90-degree elbows using a 4-inch hood. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
What Kenmore Dryer Repairs Cost
Most Kenmore dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a Kenmore Dryer Call
- Whether the dryer is gas or electric
- Any error code on the display
- How long the vent run is and where it exits the house
What Ontario Owners Should Know
Most dryer calls in Ontario come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Oregon has no license issued specifically for appliance repair that we could confirm, but anyone installing or servicing liquefied petroleum (LP) gas appliances needs an LP gas fitter license from the Oregon State Fire Marshal. Source: Liquefied Petroleum Gas licensing (Oregon State Fire Marshal)
Businesses that install, alter or repair LP gas appliances, piping or vent connections need an LP gas installation license, and the individuals doing the work need a fitter license, both from the Oregon State Fire Marshal; natural gas licensing was not confirmed. Source: Liquefied Petroleum Gas licensing (Oregon State Fire Marshal)
Hiring a Dryer Repair Company in Ontario
- Is your company licensed where my state requires it, and insured?
- Can you look at the washer on the same visit if it is acting up too?
- If a part has to be ordered, how soon can you come back to finish?
Kenmore Dryer Repair FAQs: Ontario, OR
Which Ontario technicians work on Kenmore?
Why is my dryer running but not heating?
Do you work for Kenmore?
Should I repair or replace my Kenmore dryer?
Other Dryer Repair in Ontario
More Kenmore Dryer Repair Pages Nearby
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a Kenmore repair.